New projects will be posted here first. You can post requests here too.
Topic by Axalto | last reply
Hello, My name is sonit sharma. I have seen Smart garbage monitoring system using IoT project. I want to make this project. I need help regarding this project. I want to make this on big level which can be track easily from anywhere. So please help me. My email is firstname.lastname@example.org Please make it fast. Thanks
Question by sonit1997
Hi friends I am Sahir An Electrical Engineering student. I want to make a project of controlling my room lights and fan via computer so that i can turn them off and on via computer and the status of on or off is also displayed on computer.I am confused how to start and from where. Please Help me in achiving it..........thanks
Topic by sahir khan | last reply
Alright, well the mountain pine beetle is really eating up a ton of forests, and it's releasing a LOT of Co2 into the air. So I decided, since new trees would just get destroyed by the pine beetle again, why not find a crop (Preferably edible, inedible is just as good) that absorbs the most Co2 in the world (Next to trees). Basically, I'm looking to offset the Co2 that's being released in the forest by growing another crop. Once all the forests are destroyed, the pinebeetle population will die down, and we can replant the forests. Any suggestions?
Topic by A good name | last reply
I Have 2 ipod hard drives. 1 is a 20gb and the other is a 30gb. I also have a spare dvd player, a dvd drive(doesnt work but spare parts might come in handy) and an old razr phone that the screen doesnt work but the rest is fine...Any projects i can do? or anything i can make that would come in handy? I would appreciate it greatly for some tips or project ideas..thanks..
Topic by poeticsoul44
Hi there, I have an idea in mind but not the necessary skills. It would be nice if someone would be willing to help. my project requires a good knowledge of arduino and accelerometers. So if anyone is interested then pm me. I just need the schematic and the code. Please pm me so that we can negotiate. thanks.
Topic by thakur900
I just got an ipod touch for christmas, and I'm going to be making an accessory for it that's like a laptop, and I'll call it an iTop or something like that. Anyways It's a tiny bit bigger than the ipod touch, the ipod touch will fold up and be the screen, here what the features of the bottom part will be (The ipod plugs in via the dock connector. High quality audio output Video output mini usb for easy syncing a speaker with an amp and a lion battery to power it a little lion charger a switch to wheather you want output audio or from the speaker I/O ports* *There will be a picmicro in it, and I'm going to make it so that if you output different frequencies (maybe some programmer could helpme) the pic will do different things. I posted on make a while ago how cool it would be to have an open source ipod, and this is the closest you can get. There might be anywhere from 4 to 20 I/O ports, and it'll be controlled by the ipod. Can any of you think of anything else to add before I buy stuff?
Topic by guyfrom7up | last reply
I just recently joined Instructables, and I'm looking for cheap (not necessarily simple) projects that involve mechanics or making anything out of easily found materials. Something like LostRite's hidden blade or this Mechanical Hand. I'm in high school and don't yet have a job, so many of the projects i find are out of my budget. Thanks for any of your suggestions!
Topic by StayingClassy | last reply
I am looking to do a fairly simple children's gardening project at a Green Fair that is being held in March. In the past, the group has had the kids transplant seedlings. Does anyone have any ideas? I think that there must be much better "quick" projects.
Topic by DELETED_tvwerff | last reply
It sure would be nice to have a summary form for each project on the first page detailing the category, a description of the project, a difficulty level rating, estimated cost, estimated time, etc. There's tons of cool projects on here but if they're too difficult or too complicated I don't want to spend the time to discover that on my own. Would be nice to know right from the get go. Also, it would be useful for searching to find easier and/or less expensive projects if desired. Additionally, users who complete the project could also put feedback in some type of survey to capture costs, time spent, difficulty, etc. Doing this would add a great deal of consistency to the instructable projects and I think would add a lot of value to this site! Peace, ~Will
Topic by wjbombo | last reply
A friend of mine is in the metals class at my school and he asked me for some ideas (since they can make whatever the want on this last project) on what his final project should be. He's thinking something like a trebuchet or something else that launches projectiles and causes pain (or just fun). It would be awesome if some of you had any ideas or instructables for his project. If you do, please tell me!
Topic by wingman246 | last reply
hi my name is gabe well summer is sucking over here so my little brother and I are thinking of what we can do any ideas and please no science fair type projects more like for entertainment of me and him please take that he is 7 to your consideration thanx members of instructables !
Question by ladieslilman98 | last reply
What is one to do if they start a collaboration and someone else steals it out from under them and publishes it as their own Instructable? The Colaboration system is too flawed and I will never consider working on projects publicly again. They should be hidden from view of all but members of the collaboration itself. I had a project titled USB UPS and opened it for collaboration. A user (neelandan) saw it, copied the idea, threw together amateurish circuits and published the parts to it as his own. I had planned on publishing a very professional step-by-step for a usable project. Now the idea is moot since it's already been published.
Topic by LasVegas | last reply
Today's feature is the Neighbors Project. How well do you know your neighbors, and your neighborhood? The Neighbors Project covers some easy ways to get acquainted. Start with the basics, like How to say Hi to a stranger on the street and How to make sure your neighbors get their mail if it ends up in your box, then move on to more complicated projects like How to get a tree planted on your block and How to increase produce in your local corner store. Your neighborhood is what you make it, so choose to make your community a better place! The Neighbors Project can help. Check them out, and get inspired. So, what are you doing in your neighborhood? How would you like to help out? This post has been sponsored by Pepsi. The Pepsi Refresh Project celebrates the people, businesses, and non-profits with ideas that will have a positive effect on our world.
Topic by canida | last reply
Ok I entered the contest. received the email confirmation others have appeared on the page. But my project is no where to be found... don't have much time here. If the project is not up to snuff then I should receive an email letting me know this so i can fix or replace it. please can someone find out what the issue is? and we still have now word on whom has won the laser contest. Thanks
Topic by sparten11 | last reply
Has anyone ever gotten outside funding for a project you were building? I have an idea for a device to make our local greenway trail safer but my investment in it would be at least a couple hundred dollars. I'm looking for ideas to gather outside funding for the project because it will benefit everyone who uses those trails. Because i am an individual and not an organization, my chances of getting grant money (even a mere $200) are slim.
Topic by Handsome-Ryan | last reply
Hi...i'm a final yr computer science student n looking for some good topics for my final yr project in java.....i wanted some unusual then the normal company inventory or payroll system...please help me wid some topics n briefing abt it too.. thank u
Topic by vrunda.deshmukh | last reply
Hi, I just want to inform you about a new project, which bring a tiny microcontroller board for your home automatication, to you. It is called "USBeDuino". What is USBeDuino? basically it is a microcontroller board with 3 shields, which, when combined make a very great platform for home automatication. Features: Processor: Attiny85 2 x 3A PWM Output sink channel 3 x Analog input channel 1 onboard poti 2 onboard Buttons Input Voltage 5-24V Small size The idea behind the board: Sometimes you need only projects with very less pins, such as light controlling or pump controll (in the garden). Then you dont want to use a full arduino, with a power or a relay shield... then you can use the USbeDuino! https://www.indiegogo.com/projects/usbeduino-project-all-or-nothing#home Please tell me, what do you think about this project? Does it have potential?
Topic by Jan_Henrik | last reply
Project top secret II: canceltrue jet engine:on holdD.P.C. canon:on holdnew: knex crane;buildingi wish to add a side note for those who don't know. the reasons for this post is to show my progress on instructables. oh the three main reasons for my projects to be canceled arenot enough money most of the times(please don't send donations. i'm just listing the reasons not begging for money)to hard to make sometimesto lazy to make it rarely
Topic by Sun Gear
I notice that you are presenting more projects in French and Spanish. I think this is a very good objective. But, I am a uni-lingual person (English). I have tried to get Google to translate these projects, which can be a hassle, but all the images and their references are lost. Is there a simple way to get the PDF translated (or have access to an English version) I'm not suggesting that the original version be dropped, as translations can have errors! but can an English version be available or a procedure that I could do to get it translated with the image and graphic content intact?
Topic by Donegan | last reply
Hi everyoneI am a medical doctor with interest in 3d diy projects.Due to current corona epidemic i am planning to make a ventilator (if possible). I am looking for a pump which can be used for this purpose.I found something like ( https://www.instructables.com/id/3D-printed-pump/)this but im open for suggestions.Thankyou
Question by rilyas | last reply
Hi! Im gonna try out this project, Telescope , as I know nothing about optic or lens function maybe someone could just let me know if I should go for a Tele-Auto 6.3/400 mm or a Sigma 70-300 mm F4-5,6 DL Macro Super. I asked the creator but as time runs out for me I hope this gives a faster response =) Thanks
Topic by Suizezem | last reply
I hope I'm not stepping on anyones toes here. I just posted a new topic in Aquarium Projects. It involves using a microcontroller (starting with Parallax BS2 and eventually switching to AVR) to automate some of the tank maintains. Please delete this if it is some sort of violation to refer to a topic in another forum. Otherwise, it is at:https://www.instructables.com/forum/T519BYHFAQEDBX1/I would really appreciate any advice I can get.Thanks!
Topic by GlobalVillageIdiot | last reply
For LED projects, click my profile name... reg ketan ----------------- "May the good belong to all the people in the world. May the rulers go by the path of justice. May the best of men and their source always prove to be a blessing. May all the world rejoice in happiness. May rain come in time and plentifulness be on Earth. May this world be free from suffering and the noble ones be free from fears" ---- Vedic blessing
Topic by pandyaketan
Does anyone have a Drawer Project? I have a space under the kitchen sink. The dimension is 15cm x 51cm x 52 cm. This space should be used for a dishwasher. I have seen some drawer projects using wood glue, but I would like to use screws instead of glue. This drawer will be used for cutlery, so it is good to have some divisions for fork, spoon, big knifes etc. As the whole kithcne furniture is white, the drawer shall be white for sure. I would like some tips such as track instalation, handle installation, bottom installation, finishing etc I intend to use my new Dremel to make it. Thank you!
Topic by andre_2004 | last reply
Goodmorning everyone I am not very practical in this field, but I would like to know if it is possible to carry on this project and if someone can help me to develop itInstall IP cameras I want to create a card that powers a 47 v LAN port from the USB port of my PC so that the data cable can both power the camera and receive the video signalsI would need something like that in the picture even if it comes out bigger is not a problemthanks everyone in advance
Topic by danieleb38