bbkwg2 mag? Answered

I want to build the bbkwg2, but i want a removable clip. i would like to have one that clips on with y connectors. any one willing to give me their clip or provide a choice? i'll choose a best answer by most descryptive. chopstx

Question by chopstx   |  last reply


The smallest knex gun with a removabe clip

Alright, I was messing about with my knex, attempting to make a knex gun with a removable mgazine. I had made the clip and I then noticed my knex book-end that I made ages ago. I noticed that my knex gun clip would fit inside it, so with a little modding I think I have come up with the worlds smallest knex gun with a removable clip. It's roughly 12x8x3.5 with the clip in, and 12x6x3.5 without. Please post any atempts to beat this or correct me if I'm wrong becuase I have not researched this so it might not be the smallest. Tomm0505

Topic by DELETED_tomm0505 


new knex gun/rifle with movabled stock

My very best knex rifle or assult rifle tell me what yout think

Topic by combatknex   |  last reply



knex uzi with stock

Well there are two uzis out there that are pretty good but most uzis that i have seen have this wierd pointed stock but nobody make the stock so here is this new uzi with true trigger removable clip and the stock. SO COMMENT IF YOU WANT ME TO POST IT!!

Topic by combatknex 


k'nex pump-action with a dropdown removeable mag?

I am trying to biuld a k'nex, pump-action, dropdown magisine, with stock and sight. I have everything running smothley apart from the magisine & i need help! The things i am looking for is,... # The magisine has to be removable. #The magisine runs smothley without cataching or jaming. #The magisine has a good amount of shots. #It must include a clip to go on the gun for it to slide and clip into. #And it must have a tensile to push the shots into the chamber. If somone manages to do this and follow all of the things obove I will post an instructable about my gun. With all credit to your name for the magisine. (I tryed to add pictures but my camera was playing up).  

Question by David97   |  last reply



Notebook with removable pages? Similar to Circa / Rollabind

I'm putting together a DIY planner, but I keep thinking that I want to have the ability to add and remove pages at will. Some DIY examples I have seen that allow this are the classic hipster PDA, which uses a binder clip, and other designs which use opening rings. I'm not a massive fan of either - the binder clip is a bit too I really like the Rollabind ( www.rollabind.com/ ) and Circa (www.levenger.com/PAGETEMPLATES/NAVIGATION/Products.asp) systems. They provide a set of disks, and specially punched paper, that allows you to snap in and out pages at any time. A major shortcoming of this system is that their proprietary paper needs to be used - the system relies on the right shaped holes. The do sell a punch to allow you to use your own paper, but its very expensive. Are there any other systems out there? I might try the rollabind/circa system, and see how feasible it is to cut the paper yourself by hand.

Topic by trialex   |  last reply


plzzzzzzzzzzzzzz(good builders)

Plzz any of you good builders i want a thompson smg without the drum clip i want the strait clip and removable if not oh well.And plzzzzz a p90 with removable clip not an rbg if not removable then dont attempt. so if you will accept this plz once you are done do the folowing:post a picture and if you could instructable or send intructions to metell me range type of ammo and plzzzzzz a videoand finally the guns must be true trigger. thanks!no need for p90

Topic by combatknex   |  last reply


Prevent Clipping and Hum in class d amplifier

Hey I got this amp. Now at large volumes, there seems to be clipping. Even though the amp is 20w, my speaker is rated for 25w.  How can I prevent it from happening, rather than never playing at high vol. Can it be done by AGC or Dynamic Range Compression or Noise Gate. In my case, which is a ready made pcb, how can I include such circuitry. Is it even possible. Also, while selecting an IC, what needs to be looked at that will suggest clipping would not happen, or which parts needs to be referenced from the datasheet which ensures preventing clipping. At large volumes, if I disconnect the mp3 player from the amp but keep the jack plugged into the amp, a high hum is heard. When removed, hum is lowered but not eliminated. Similarly, when track changes. What steps needs to be taken to eliminate them. All the time before actually getting into practical electronics, I was only looking at Power output, THD+N, Class, etc of amplifier. It is only after going hands-on, for the first time, that I can experience the real things which most matter. Appreciate for helping me become a pro. Thanks.

Topic by arjunmenon 


How to Take Down a Traverse Decorative Rod

Hello Friends, Decorative traverse rods are one way to accentuate your windows with drapery. Traverse rods enable you to open and close the drapes with a pull cord. Sometimes one or more of the rings breaks requiring replacement. Unfortunately replacing rings requires removing the traverse rod from the window. Taking down a traverse decorative rod enables you to separate the rod and remove the faulty rings. Unlike standard rods, the traverse rod fits inside a channel clip across the top of the mounting brackets. Unhook the drapes from the traverse rod master carrier. The drapes hang on metal hooks that lift out of holes in the traverse rod. Hold one end of the traverse rod with one hand and turn the decorative end cap counterclockwise with your free hand. Remove the end caps on both ends in this manner. Find the screw on the retaining clips securing the rod to the mounting clips. There is a mounting clip on each end and one in the center. Remove the screws with a Phillips-head screwdriver. Grasp the center of the rod and lift straight up to remove it from the brackets. Pull the rod away from the wall. Thanks and Regards, Baron Davis

Topic by DELETED_BaronDavis   |  last reply


instant ice?

i watched a 3 minute clip on utube where a glass of water was pplaced on a table. next...salt was sprinkled into the water. then a straw was lit, placed into the water and removed after a few seconds. the water turned into ice. is this a camera trick or true

Question by modtrend   |  last reply


Knex TH2BR [Mod 3]

Hey knexers! I have a modification of the TH2BR here for you to see. [Mod 3] Just some final pics of what I have of this gun. .

Topic by beanieostrich   |  last reply


Does anyone know a jamless red rod knex magazine for a repeater? Answered

Does anyone know a jamless red rod knex magazine for a repeater? Clip size doesn't matter, and it isn't neccesary to be removable. If it uses a pusher then don't post it in your answer.

Question by TigerNod   |  last reply


ZKAR V2 Mod-Fixes rapid fire problem

Hopefully you can see what this is. Replace the borken Y-clip with a grey connector. remove the blue rod and the grey connector in the gun already to make this fit. This new bullet lock fixes the rapid fire problem with the zkar V2.

Topic by rec0n   |  last reply


extracting batteries from recycler

Has anybody tried to remove batteries from this?there are a bunch of dead 9V's in there and i want to get them to make battery clips from them.but the lid is small and it is spring loaded.I was thinking a speaker magnet on the end of a string and just drop it in and you get whatever you get.are batteries magnetic...

Topic by ledzep567   |  last reply


What could it be...?

Hmm... PADBHAR? 9R per B. 2S per P. Hmm... [Bipod too, but that aint made yet] Pump action double barrel heavy assault rifle. 12 rounds per barrel. 2 shots per pump. Can fire one at a time or both at once. Removable Magazine/Hopper/Stripper Clip. Bipod to come.

Topic by ajleece   |  last reply


High Quality rubber band guns

Ok guys, I want to see if I'm all alone on this site in making fine replica (and functioning) rubber band guns. I've posted my most recent, along with all the others I have in my collection. Most are sold (sorry... lol), but I make more all the time by order.Oh, and by the way for all you gun enthusiasts, the CZ75B and the Beretta 92FS have moving slides that don't hinder the preformance of the pistol. Also, the MP5K has a folding stock, removeable supressor, and removeable clip.

Topic by HK.RBG.armorer   |  last reply


My newest gun

This is my final version of this gun. It was originally called an M16 but it doesn't look like one anymore. There are removable clips that you can pre-load, the front grip is detachable as is the top sight rail. I'm posting it on KI at the end of the month. Instructions have been posted http://knexinnovation.gigacities.net/forum/viewtopic.php?t=199 http://www.youtube.com/watch?v=qWQf0xlWzfg

Topic by bakenbitz   |  last reply


which gun do you want?

Ok, after i post the AR-4 Commando v2, i also have plans for 2 more guns. however, i only have enough parts and time for one. thats why i want you to vote. you can vote for either:-Mamba 12-G shotgun with new removable clip mechanism (4 votes)-HS-90 full auto rod shooter rifle (4 vote)VOTING IS CLOSED!

Topic by DJ Radio   |  last reply


Timer for solar LED dusk/dawn light

I needed a solar recharged, LED light that came on at night. I purchased a small LED light (rather bright with 6 LEDs) that has a solar cell, photo eye and 3 AA size rechargeable batteries. Made to clip on the patio umbrella, it is ssmall and light. The solar cell and photo eye are on one piece. The LEDs, batteries and circuts are on another piece. the two pieces are joined by a wire and are hinged together, allowing the unit to clip on the edge of the umbrella. I plan on removing the hinge and extending the wire to allow a two foot separation. I need to add a timer to this. Something that will turn off the light about 4 to 5 hours after it comes on. I assume it will be something that starts when the LEDs are powered up. Though I guess it may be something that is also triggered by an additional photoeye. Or maybe someone has a better idea? thanks

Topic by jnlvngstn   |  last reply


I need your opinion....

Ok, so I am within about a day of etching my iPod via saltwater. I am going to attempt to just let the clip (backside) of it rest in the water, using contact paper to guard against water damage to my circuit board. That is one option. The other is to remove the circuit from my iPod, leaving just the case. I've never done this, but have a guide. Do you think it'd be worth it to dismantle the player? Any, and I do mean any, suggestions are appreciated! Thanks!

Topic by Bran   |  last reply


Lamp Shade Out of MRI Image Film?

I have a set of MRI scans of my knee. I make lamps and want to make a lamp shade out of these scans. A friend says, no - they will burst into flames. Another pal says, yes - go for it, get an old lampshade from Salvation Army, remove the cloth and clip the MRI scans to the wire armature. Oh, and if I make one, to be sure to use a low watt bulb. I think the scans are cool. But if they burst into flames, that would be bad. So - any idea how this could safely be done? Thanks.

Topic by mandodeb   |  last reply


Sorry for saying this.......

I have some bad news on the full auto. I am not able to finish the gun, i was pretty surprised that i ran out of parts pretty quick. I am sorry, but i will have to cancel the project........ all it basically is is someone's semi-auto modified to hold more shots, and to be full auto three things will be done instead: 1. I will post the removable clip mechanism i was talking about earlier 2. I had a pistol planned as a backup in case this project failed. I will post it. 3. I will come up with plans for a SPEC-9 sniper rifle v2

Topic by DJ Radio   |  last reply


What is this??? Answered

I found this in a box of misc. wires yesterday at a thrift store looks like a toy for a computer game maybe. It has a speaker up top and an adjustable microphone at the bottom. I know that speaker and microphone are self explanatory, but I was curious to know what exactly it may have been used with. It has a place in the middle to put in three AA batteries and it has a removable clip to attach it to something. When I put in the batteries it appeared to work or the little red light indicator  came on and the speaker was on with a real low fuzz sound. I have not plugged it into anything yet , I wanted some input first.Thank you in advance to anyone with help.

Question by ViolentaniousA   |  last reply


New knex assault rifle-Introducing the AR-4 commando- NOW POSTED!!!!!!!!!!!

ITS POSTED!!!ok. a lot of you hated my sniper rifle so i decided to make a new gun-an assault rifle. it uses the new mag idea from katarukito, the mag is a removable clip, the back of the stock is based off the Storm 221. its true-trigger.However, the rifle is still in progress, but pics may be released tomorrow(pics are up!!!). I just wanted you to look foward to something. it is not flimsy, except on the stock (fixed), bolt action.if i post the instructable, and you hate it like my sniper, i'll post two block trigger guns, and then quit knex for a good bitok, the gun is posted. i have introduced other guns with the same name, but they had problems with firing more than one shot at a time and jamming. if you have any problems with this gun's mag, blame Katarukito, because he designed the mag in the first placePROS-good range-not flimsy-has removable clip for 5 rounds-true trigger-pretty comfy-less friction than similar barrels-piece efficientCONS-mag sometimes jams-blame Katarukito on this, i was trying to put it on a gun-not auto-loading---you have to turn a knob on the mag after every shot (however, that produces a pro, Dsman 195276 pointed this out)-you cannot expand the mag to hold more parts-it is always going to hold 4, no matter what you doEXPECT INSTRUCTIONS BY SATURDAY!!!

Topic by DJ Radio   |  last reply


My TRUE Semi auto

The Semi Auto I have came back to my semi auto, I made one when I first started knex, barely shot, not reliable at all, I've remade it over the past 4 days, it has a new mag, new system, new internal mag pusher and new way of loading. Pros Semi auto Removeable mag Internal pusher Takes less than 30 seconds to detach the mag, load 14 bullets and re-attatch the mag Not many pieces Shoots in an almost straight line Cons Bad range (around 7-10) Not that reliable Jams if not fired right Uses 11 Y clips

Topic by yerjoking   |  last reply


knex game Ideas

Post rules on your games here, decide on game modes(eg. capture the flag, Eliminate all, hostages, fortress raid, build on spot etc.) and maybe guns used! Well, these are the rules for a ctf game designed by me. Each team must have at least 3 players Each team has a base. The bases must be of equal size (roughly) and will contain a flag. You are allowed 3 different guns. One must be a pistol, one a rifle of any sort and any other of your choice (you are allowed another pistol or rifle). The guns must all fire the same type of rod. You are allowed up to 30 separate rounds per gun. If the gun has a removeable clip, say 20 rounds each, have 1 clips of 20 and 1 clip of 10. If the gun is single shot, carry 30 rounds. If the gun has an unremoveable mag, reload the mag every time you run out. There is a place to reload, where you can collect 10 rods at a time, and you can't revisit the point until the next round. There are 5 rounds. Each round lasts either until both players are out of ammo, or after 10 minutes. To win a round, a player must capture the other team's flag more times in a round than the opponent. If the round is a tie, then you must keep playing for an extra 2 minutes until one team wins. The flags must be the same size, but may be different colours. After the 5 rounds are up, count up the victories and the team with the most wins. Well that's it, tell me what you think.

Topic by The Jamalam   |  last reply


should i bother to make a m107 sniper rife

First I need to say: I am no knexpert, new to the site (noob) but I want to prove I am not one of those people who just comment. I am thinking of making a M107 sniper the minimum it will have... -shoot red or yellow rods -fire 60+ feet (thats going to be tricky) -have a removable clip -look something like the real thing -internal ram or just out the way -a folding bi-pod -true trigger I know it sounds almost inpossable but i am going to use the best of some guns and try to put it together. It will probly fail but it will be worth the try. Any questions or suggestions?

Topic by heat-seeker   |  last reply


Can this be a coincidence? Do they look like two independent designs? Answered

I came across this kit when I was browsing the web. What surprised me is the uncanny resemblance to my design published here in Instructables. I'd like to know what you guys think about those two designs. Do they look like they are created by two independent designers? Can someone design a product so similar to another without copying the other? (The kit in the front part of the picture is taken from Eastern Voltage Research website. The photo is photoshopped by them since yesterday to remove holes on the end of the PCB which accomodate home made battery clips.) Please post your opinions! Thank you!

Question by ledartist   |  last reply


Knex Mp7

-Edit, pictures taken from Samsung steller, quality isn't to great- Hello! Its been a very long time since Ive posted anything on Instructables. But here is one of longer projects, my MP7. It look me three weeks to finish building. It feeds perfectly and has removable clips. It is around the same length, size and weight. It uses a brand new modified ram rod. It feels amazing in your hands and its very sturdy. I have added a strange looking stock instead of the rod stock for strength. There is no point in having a retractable stock because it has a very long ram pull. It also has basic sights up on top seen on MW3. It also has the folding fore handle. More Specs: Shoots 60-70FT (Using two bands and modified ram) Holds 20 Grey connectors in mag. Removable magazine. Very long ram pull. Non retractable solid stock. Very comfortable handle mold. Solid 6th layer body frame. MW3 low profile sights. True trigger. Folding fore handle. Fast reload time. Upper rails. Easy to reload magazine. Trigger guard.

Topic by Blue Mullet   |  last reply


K'nex m4 carbine working modle

Dannys m4 carbineHI. I was inspired by dannys M4 carbine, but i was let down to hear it didnt work. So i did what i did on my knex sniper(wich wont be posted) I added a barrel and a track to the fireing pin. I'm suprised in what ive come up with. I have a removeable clip, a front hanle attachment, slug attachment that fires batteries,remember i made it after these pics.(for those who dont know what a sulg is look it up on wikipediea.com)Also i have a detachable stock(its the one from my sniper) and it has a bullpup desine. I based this off of dannys as best a i could. its not done yet because i need a trigger, but that is being looked apon. thx to danny. Should i post???

Topic by knex hater hater   |  last reply


Which NERF Gun is Better? Triple Shot or the Quick 16? Answered

I don't know what to get? I want to get the Triple Shot becuase it shoots three darts at once. Cool, huh? It has a range of 30 ft. after air ristrictors being removed. Not much, but I usually have a war in my house so it's a reasonable range. It's pump action and it's 21.99 at Toys "R" Us. The Quick 16 is cool becuase it has a slam fire mode that means it's fully automatic, semi automatic, and pump action. It has a built in stock and you insert the darts in without taking the clip out. That's what got me excited about this blaster. I don't know exactly which is better. If you have one of those blasters or have used one. Then can you describe the advatages and disadvantages? Thanks!

Question by lil larry   |  last reply


Is there an easy design to eliminate air leak in the breech system of a Nerf Longstrike? Answered

I have a Nerf Longstrike, which i have modded for better performance. I removed the air regulator in the barrel, plugged some holes in the piston, and put padding in to protect the pieces from the increased power of the piston. As i was trying different barrel mods, i noticed something. The breech has a long tube that serves the functions of shutting the breech, accepting the dart from the clip, and delivering the air from the piston. When the breech is closed, this tube sticks into the back of the actual barrel. I noticed that where this tube fits into the back of the barrel, there is a 1mm crack all the way around, letting all the air out. the barrel isn't even a sealed system! I have tried several methods to seal this, but all have failed, ruined the performance, or prevented firing. Does anyone have any suggestions about this? If i can seal this well, all the air will be used to pressurize the barrel, without rushing out of the breech tube after the dart has left. 

Question by ilpug   |  last reply


What to buy if your a beginner

Hello, I'm 13 and I want to get started in electronics. I know how to solder and read basic schematics and I have two of those 200 in 1 electronics sets. I am about to make an order for some components from www.bitsbox.co.uk.This is what I have so far, anything you would add or remove? (I couldn't easily get the quantities)pp3 battery clips2 x AA Battery Holder3 x AA Battery Holder11 wire single core bundle1uF 50V Electrolytic Radial100uF 25V Electrolytic Radial220uF 16V Electrolytic Radial22uF 50V Electrolytic Radial25-way PCB D-connector PlugPrototyping breadboard 80x60Watch crystal1N4001 Rectifier Diode 1A 50VStripboard 95x64White LED 5mm 30000mcd24V 16A SPST K4TA24 RelayPiezo Transducer with Flying Leads7805 voltage regulator (to get a steady 5v from a wall wart for the breadboard)NE555 timer IC2N3904 NPN transistorBC213 TransistorATTiny2313-20PUlm386 op-ampStandard Toggle SPSTupdates:I have a multimeter, resistors and LEDs and I am buildng an attiny 2313 programmer as well as adding to my collection.

Topic by josh92176   |  last reply


knex pistol contest

Well, there are literally thousands of sidearms out there, all made from knex. All have fallen to two categories: have not built yet and built. I'm seriously tired of knex guns that have a lack of function and too much good looks. and so, I would like to declare a contest. there are three main areas for scoring criteria: 1) function 2) size 3) broken pieces I am asking this great community to pull together and create something awesome. all entries should: > have a satisfying feel when the firing pin first slides home and the shot leaves the barrel. > feel/ look like a traditional side arm > have an innovative feature: IE, removable clips > not use broken pieces > be efficient. I don't want to be pulling the firing ram back with 20 pounds of force. scince people will continually argue over their gun's position, I will judge. I will also not submit anything. If you think you built a knex gun that meets these suggestions (and maybe smashes them), feel free to: < make an instructable with good/ amazing clarity of instructions < make the instructable sound like you care < post the instructable as a link in reply. thank you, and good luck. I'm sort of like the Simon Cowell of knex judging. hard to please. contest has opened now. contest will close on march 31, 12:00 AM.

Topic by xenongamer   |  last reply


Suggestions for a cheap, simple robot unicorn build

My 5yo daughter has figured out that her mad-Scientist daddy can make crazy things come true.  For her birthday, she got a real unicorn and a princess crown (see picture attached).  Now for Christmas, she has her heart set on a ROBOT unicorn, and I think I'm going to try to tackle this, but I need to keep the scope tight so that when Christmas arrives, I'll have a deliverable for her. (My instinct always leap to grandiose ideas like actual quadrupedalism that would balloon the time/effort/money inputs into the stratosphere.   My biggest obstacle to make this work for Christmas is to stick with K.I.S.S. principles.  I can do basic welding, woodworking, fabricating, stitching, etc.  I'm reasonably good at electronics, and am a professional programmer with a degree in Aerospace Engineering.) Here is my rough  build plan:  (Completely open to improvement suggestions) 1)  Build frame out of 1/2" square steel tubing and weld together.  Leave large torso cavity for electronics and batteries.  Feet will have wheels concealed by a hoof shroud.  Feet will be upgradable (see tech features below) 2)  Use blue foam to rough out body shape.  3)  Cover with about 1/2" of soft foam covered with felt.  Use yarn for mane and tail.  Cover should be removable and washable. I'm trying to figure out tiers of work so that as long as I get the basic frame and covering down, I'll be able to increase/decrease the scope to ensure I'll have a deliverable for Christmas.  Here are the tiered robotic features I am envisioning: Tier 1: Make the saddle bounce at about .5Hz with an amplitude of roughly 1/2".  Possibly make head/neck bob up/down in sync. Tier 2:  Add horse sound effects Tier 3:  Build sensors for the reigns and stirrups.  Monitor if stirrups get pushed inward in a basic kick the horse motion.  Monitor if one reign or both are being pulled.  Make sounds effects based on inputs.  (E.G.  Clop, clop of hooves begins when stirrups are pushed in, and stop when reigns are pulled.)  NOTE:  Since they have access to real horses, keeping the controls reasonably close to riding a real horse will make this double as a trainer/simulator for her and her friends. Tier 4:  Upgrade wheels to powered.  Move based on reign and stirrup inputs.   Max speed will be very slow (40fps or so), so that it can be used inside safely.  Movement is mostly just to augment her imagination, not to move like a real horse. Tier 5:  (Not much chance I'll get this far prior to Christmas)  Upgrade software, sound effects, etc. Current back of napkin ideas: Frame will probably have 3 pieces: legs/torso, neck/head, Saddle/back  Saddle/back removable for electronics access. Neck/head will be joined to torso in 3 spots:  the top point will be anchored with a chain link between two eye-bolts, the other two points would be on the sides of the bottom, with compression springs pushing the neck and torso away from each other, limited by a mechanical linkage.  This should give reasonable motion ability, and allow the two base points to become the sensors for the reigns being pulled. I'm thinking a small 12V deep cycle battery, and 12v salvage DC motors powering the wheels.  Depending on the motor torque, I'll either power the back two feet and keep the front feet as swivel casters, or power all four and turn tank-style. The budget needs to stay reasonable, say $100ish.  This is a kids toy, and I've got lots of other mad-scientist projects to pump money towards. Outstanding questions: Motor selection, cheapest with high enough torque Good, cheap way to make seat and possibly head oscillate.  Mechanism needs to not break even if a 200lbs rider sits on it.  (Doesn't need to work when overloaded, just can't be permanently damaged when overloaded.) Locate inexpensive 12v charger that won't overcharge if left connected, but will charge a 3ah battery reasonably quickly.  (Or schematics to build one)  Essentially, looking for a best bang-for-buck charger. Least expensive way to play audio clips?  I've got plenty of horse-sound clips located, but I need a way to play them economically. Not sure how much force will be needed for movement.  I'm assuming a 70lbs rider/robot max and that it will primarily operate on flat surfaces, potentially on carpet.  Can't burn out if overloaded.  Suggestions on simplifying this?  Suggestions on simple improvements?  Ways to keep the costs down?  Sources for economical parts?

Topic by SvdSinner   |  last reply


Modifying a Singing Greeting Card

A while ago my wife got one of those singing Hallmark greeting cards. (This particular one played the Law and Order theme song) Well after a while it no longer played the song. I opened it up and found that there is a circuit board inside with a 3v button cell battery attached to it. I removed the board and the speaker and the battery and I'm pretty sure that I could attach wires to the two contact points and connect them to batteries that would complete the circuit and allow the theme song to play again. What I want to know is if I need to take any special consideration when putting in a new battery(s). I was going to try to just put two AA batteries in series (1.5v +1.5v =3v, right?) but I don't actually know anything about electronics and so I wanted to ask here if there were any resistors needed or if there were any differences between the button cell and the AA batteries that would require me to do something different.While we're on the topic of these cards I just thought of a neat project. Design some sort of holder for the circuit boards that would allow them to act as sort of an interchangeable cartridge. Basically detach the speaker wires and battery contacts from various boards out of various cards and design some sort of holder with contacts for the speaker and power source at the appropriate points and be able to change out the different boards. Not really practical but sounds like fun.I just thought of yet another question!Would there be anyway to hook the board up to some sort of audio cable (in place of the speaker maybe) so that I could plug these into a computer and record the song off of the board in a digital format. (Again not very practical but sounds like fun.)Anyway, this is my first post here and I'm sorry if it's a bit jumbled but I don't have a very organized mind and sometimes it's hard to put my ideas down in a succinct manner. I tend to just ramble on incessantly in a train of thought sort of manner until I think that I've said what I think I wanted to say. In closing, I like this site and plan to be around for a while and learn as much as I can. If somebody would like to help me with these ideas/projects I would be happy to provide pictures of the circuit board and pieces that I have if it's necessary.Thanks.~JoshI'm using two AA batteries. I have a wire between the positive side of B1 and the negative side of B2 and wires coming off the open ends. I tried connecting the batteries from the spot where the negative side of the button cell was to the silver rectangle thinking that that would complete the circuit and make music. That didn't work. Then I noticed that the positive connection for the circuit was actually where the clip that secured the battery was before I removed it and that the positive and negative sides of the battery were going through a capacitor before touching the final contact. so I tried placing the positive wire up on the positive contact and then placing a wire from the positive contact to the final contact but that also didn't work. I don't have any solder and have been using electrical tape to secure the wires. The wires are a fairly thin (I don't know the gauge) stranded copper. I'm not sure if the wires aren't making good contact or if I'm just doing something wrong.

Topic by MrKltpzyxm   |  last reply


How to replace your cars fuel pump in three easy days

My truck, over the last few months, had developed a lovely little penchant for not wanting to restart once warmed up. This wasn't to bad as long as I didn't plan on being anywhere less than 3 hours, and kept my wife from sending me to the store. But with summer here and wanting to be able to run off and go fishing I decided to fix it. After doing some diagnostics I think the most likely culprit was a fuel pump that was sticking as it heated up, and I thought this info might help anyone needing to replace theirs. Day one, we'll spend this day dropping the fuel tank. Those repair manuals are really helpful, just slide a jack under the tank, unbolt the straps, drop the tank, disconnect the fuel lines and you're done. The reality is just a little different. Firstly the entire time you're working under your car a gently rain of road grime consisting of grease, dirt and decayed road kill will be falling into your eyes, ears and mouth. Second, there's a lot more lines going to the fuel tank than the manuals say, after sweating and swearing over trying to remove the spring clips the best option is just to cut any rubber lines since after 10 years they're all rotten anyways. Now struggle blindly to maneuver the fuel line disconnect tool into position by feel, while pushing the tool into the connection shove the fuel line in the direction of the tool while simultaneously stabilizing the fuel tank with your head. Once all the lines are cut or disconnected lower the tank using a jack, a couple of coffee cans and a bunch of short pieces of 2x4 and drag out from under the vehicle. Unscrew the fuel pump assembly and remove from tank, then detach fuel pump from fuel pump assembly. you are now done for day one since your wife has the other car. Day two, taking a section of each of the lines you cut, along with your old fuel pump, visit an autoparts store, hand the lines to the clerk and ask him for 3 feet of each size, now marvel in wonder as he LOSES the pieces you gave him between you and the back of the store. Smile nicely as he tries to explain what happened and then say "Umm No I don't need anything else" and leave. Go to second auto parts store where they will try to sell you, first, the wrong pump, and then, when they finally admit it won't work, they try to sell you the entire fuel pump assembly, say "Let me think about it". Go to dealer, laugh hysterically and vociferously ejaculate "Oh Heck, No!" when they say the pump is $439.00 and will be in Monday. Lastly drive to the final remaining autoparts store and say "Please tell me you have a fuel pump like this one" and rejoice when the guy say "Sure, you need the Bosch with the adapter socket, I can have it here by three". Weep with joy, go home and wait until three. Day three, the true horror is that we now reverse the steps taken on day one and there is no way to test if everything works until the last bolt is tightened, however day three began with a stuffed up head and severe vertigo caused by allergies, apply medication and go back to bed for several hours until you can stand without puking. When well enough, reverse the steps of day one. Fortuitously the majority of the road grime will have fallen on you already and this time it will be as refreshing as a summer's shower. Add two gallons to clean gasoline and start the vehicle, when the vehicle fails to start remember that you disconnected the battery. Remedy that and marvel when your vehicle starts, but the joy will be short lived when you remember that, oh yeah, it would start before. So now, hold out hope that it won't have the hot start problem anymore, but you'll never know if it will happen again, unless it happens again.

Topic by Tool Using Animal   |  last reply


What kind of war weapons would you like to see?

Well I need some ideas. I'm getting rather bored of the "must have" weapons for war. This isn't always the case for some people but yeah I still don't know if you would like certain types of weapons or not. For example, the old generation of handle fed side arms are rather obsolete compared to the new oodammo assault pistols. I wanted to try something different with the BAW by sacrificing the range of a turret, BA, or shelled ammo for simplicity, reliability, and fast reloading. It's one of those weapons that can be mass produced somewhat easily. I still understand the TR pretty much outclasses it though so I'm going to ask you guys first. What kind of weapons are you still interested in seeing and using in war? I'm thinking mostly for indoor or small, casual outdoor wars, nothing super competitive that you plan on taking to some large event though I may be able to make something like that. For example: Would you still like a basic assault pistol like weapon? Like a spiff-like weapon with removable magazines and maximized for range. Basically something that could be mass produced for small indoor wars? Could also use my magazine idea further down. Would you still like a handle fed side arm that had a trigger behind to get more power out of a compact weapon? Maybe a repeating crossbow pistol? That could probably get decent range but still be a compact weapon. Shelled ammo? I could probably make something like the BAW but with shelled ammo and possibly get more range with the ammo. You could easily make a shell catch. Would that be too much of a hassle compared to just using a bolt or turret? Side loading magazines? Does that sound good for anything? It kind of follows along the same concept of oodammo pistols where you can quickly reload a fixed magazine with individual rounds or entire clips without needing to worry about multiple magazines. I had an idea for this but didn't know if it would be put to good use in a war weapon. K'nex flinging RBGs? What would it take for you to use them? I like the semi auto firing capabilities and decent range compared to "true" semi autos. I know you have to load a rubber band for every time you want to fire but then you also have to do that with a normal slingshot but you can only use one set of bands. What if I made one fully auto with controllable fire rate (yes, I have an idea for that though I don't know if it'll work). What if I made some sort of way to speed load rubber bands? Shotgun- useful at all? Two ideas here. One would be just a basic pistol kind of like my old shotgun pistol but with a multi-chamber shell so you'd have like 5 shots of 8 green rods. I can't build this but maybe a pump action sling that shot like 3 connectors? Any other ideas? Take into mind my amount of pieces. The UMP and BAW both used about all my yellow connectors and green rods so I'm looking at either pistols or SMG sized weapons possibly without filled stocks. I'm also expecting that you'll build and use it if you request it. I don't really care for blindly thrown suggestions.

Topic by TheDunkis   |  last reply


My Grand Tournament Entry TDAP (new* Official TDAP)

Alright for lack of a better name for now this is just TheDunkis' Assault Pistol. It's a compact pistol made specifically for war. I did make a video but I can't upload it using my mom's computer so...yeah. Anyways they're three things that make this the almost ideal war weapon.1. It's compact. Usually no wider than the average person at the age of...I don't know I'm skinny so probably a 12 year old lol so it should be easy enough to carry around as a secondary weapon.2. High Cap magazine. It holds I think around 25 green rods. I know green rods aren't the best rounds but typical wars happen in homes where distance doesn't count as much and for bigger battles it would be more of a secondary weapon.3. Removable magazine. It's based off of Zak's from KI. It clips in and out really easily but it's really sturdy so it should never fall out even if you're shaking it around.Alright so as I figured the gun wasn't enough to make it through. I still wanted my own assault pistol that works though (I'm hoping that we shift over from side arms to these as they'll be easier to make original). This is based off of the original in some design like the handle. It uses what I believe to be the first slanted and open magazine for blue rods. Why slanted? Simple three reasons. 1. It looks kind of cool. 2. It acts as a hand guard. 3. It's keeps it compact so it's not sticking out but it also feeds ammo towards the front more so that it gets more power. That's the main reason anyways. I have plans for this gun if I keep it around anyways. This is the simplest design with no special details or anything but I'm hoping to make a smaller and larger version with extra features. For example the larger will most likely shoot yellows possibly with a removable magazine and a stock. The smaller will use white rods maybe with a slide and maybe with the magazine in the handle (although with a similar open mag style. I figured it out I just need to figure out how to connect them).Here's what I rate this new version compared to the old one. *newer version1. Size Efficient. 4/5 It's compact but not as small as it can be. *4/5 It's pretty much as compact as it will get but you could make it ultimately smaller.2. Power and Range efficiency. 3/5 At the moment it's about average but I havn't really perfected the firing system. Sometimes it doesn't even fire well at all so I have some work to do. * 4/5 It's a whole lot better now. It's decently powerful for its size but obviously not a sniper or anything.3. Accuracy. 3/5 I haven't honestly tested it a lot yet only enough to know that it fires but by the time I'm done hopefully this should updated to be a 4 even though it's more of a CQC gun. * 4/5 I tested it a couple of times and it hits very close with the sight I'm using. Still not perfect.4. Easy, fast loading. 5/5 With removable magazine that is super easy to put in and pull out this is one of those "as good as it gets" in the fast loading department. * 3/5 Ugh this is where it fails. The good news is that it's still pretty to load. All you need to do is push blue rods through the barrel. No need to be precocked nor do you need to hold the pusher down just push the blue rods in and down. Should hold about 10 blue rods maybe more.5. Handling. 4/5 pretty standard I guess. The handle ain't bad and the trigger is smooth enough. So far the gun doesn't work the way it should but that will be fixed before I'm done obviously. The magazine area makes for a good forehandle when not using the shroud. * 4/5 Still pretty standard expect I traded around a couple things. The angled magazine does not make for a good foregrip. It works but I don't care for it. The handle is the same but the back was changed to be a little more comfortable. The trigger works better.6. Cocking. 3/5 Not super bad and not super good. I'm not sure if I should put a slide on or not. * 3/5 same old same old.7. Looks. This is another one of those love it or hate it things but I think it looks good all but the support on the bottom which I put on for more of function than looks but I do think the gun looks better with it. * I'm not sure which I like better. I struggled with the looks on this one for awhile and tried adding a lot of pieces. I finally ended up getting rid of pieces instead until I finally got what I wanted. I think this version looks better good.8. Reliability 2/5 So far I'm not going to lie the gun isn't the best but like I said it ain't working right by the time I'm done I'll make sure it's working 99.9% 5/5 The only problem so far is that sometimes two shots try to go at once and they just fall out from the friction. It only happens if you don't load the ammo right. Edit: Fixed updated design doesn't jam anymore.9. Other features. +1 (judged on about how good the extra features are. Anything that doesn't fit above will be included in the score which will add the amount of points as a bonus into the final score) It has a simple rail nothing to special and a simple mock silencer shroud for the barrel with a forehandle. I think it makes it look better but bigger. * +1 this version doesn't have anything super special. The best is the open magazine which I figure deserves a +1 on it's own considering how useful they are.God any other ideas for my newer gun? I'll probably want to post but I also want to work on a Master Sword V2 really soon and I need all my pieces for it. I might go out and buy another bucket soon but if I don't then this might go by by. I'll try getting a video as soon as I find what I need for the camera>computer hook up for videos. How do you think it would compare to the BBKWG and Spiff (along with the other APs those are just the most popular)?

Topic by TheDunkis   |  last reply


Tracking down the speed problems on a laptop.

I've copied the conversation here so we could remove the information from the original instructable's comments.  I figure this would also be of some interest to other forum viewers who may have similar problems, or may be able to chip in. The long and short of it is, 92033 (Ed) has a refurbished laptop that takes literal hours to run a YouTube video on.  I suspect that it's due to a bottleneck with his internet connection.  Here's the conversation thus far: ---------------------------------------------------------------- 92033 (Ed): Thank you kindly for your prompt reply...appreciate it very much. I came across this site by accident in searching for something else and now I'm 'hooked' on it. :) So far I've read over 400 archived posts (whew)...as well as looking at the videos. The videos are somewhat of a problem because this new laptop only has 512 mg memory...LOOOOOng time to load. For example...to watch a SLOW 5-minute You Tube video takes 5-1/2 HOURS to load...keeps showing a couple words at a time...need to get two new memory chips to upgrade to 2gb. Thanks again...Take care. ---------------------------------------------------------------- eddems: I think you're basic download speed is killing ya, not the laptop. check you're speed at Internetfrog.com, if you see the link near the bottom for the old test, run it, I like it's graph of upload and download speed much better. ---------------------------------------------------------------- 92033: Thanks much. I'll check it out. I ordered a 1gb SDRAM Memory chip which just arrived yesterday. Hope this speeds things up a bit. ---------------------------------------------------------------- harley_rly: i hear u man, my computer is hopped up, but i live out in the sticks and have dialup...i only get 24kbps at most :( ---------------------------------------------------------------- 92033: Maybe there's hope for 'us' yet. :-) I phoned Tiger Direct to see cost of an upgrading memory chip to go from 512mg to 1-1/2gb. The guy I talked to suggested I get "PC TUNEUP 2.0" which bypasses the Windows Operating System (I'm using Windows XP Pro) and speeds up the system. I gave it a try and ordered the CD (cost $39.98 - $44.77 postpaid). It hasn't arrived yet but will let you know if it helps as he claims it will. He said that if I just ordered a 1gb memory chip my system wouldn't notice much improvement as it is, but this CD should do the trick. THEN...when I DO order the Memory chip(s) to get total of 2gb my system should zip through like a rocket with the CD just ordered. I'll let you know when I get the CD and about the results. Just hope I haven't thrown forty-five bucks to the wind. Thanks for the contact...appreciate hearing from you. TAKE CARE. ~ ED ---------------------------------------------------------------- Javin007: PC Tune-Up "bypasses the Windows Operating System?" This guy fed you a load of crap. (I work on computers for a living.) PC Tune-Up does nothing more than clean up registries, defragment harddrives (if your OS even needs it, some don't) and keeps drivers up to date (which you could do manually.) That guy's an idiot, or just a liar. Could be both. Unless you were buying PC Tuneup 2.0 from Tiger Direct, in which case we can add "sleazy salesman" to that. What are the specs of the laptop? Go to Start/Run and type in DXDIAG. This will give you a quick snapshot of the specs. Specifically, I'm curious as to the processor speed/type. For a 5 1/2 hour "load" you're more likely looking at network slowdown issues (although 512 megs for XP is WAYYYY too little. I HATE when they put PCs together like that). The RAM upgrade will show significant speed increases, but no improvement with YouTube videos or other downloads. I'm glad to see you are returning the CD. ---------------------------------------------------------------- 92033: Thanks much for your input...appreciate it very much. I checked the DXDIAG as you recommended. Here's the info on it: IBM ThinPad Laptop PC. Model # 23738TU. Intel Premium M 1.70GHZ. 512mb SDRAM Memory chip.Page File- 351mb used,513 mb available. Direct Version-Directx 9.00 (4.09.0000.0904). 512 mb SDRAM-Actual 212 Ram. AVAST Anti-Virus. MS Windows XP-PRO.. Dialup Speed-40kbps. PC2700 SDRAM 512mb Memory Chip installed. I ordered 1bb memory chip which arrived yesterday. Now I have to figure out HOW to remove the bottom of this laptop to install it...lotta small screws on it. :-) Oh, total memory shows 32mb. I don't know if this means much to you. I note your comment that the added RAM memory WONT (?) speed up loading YouTube videos? Is that correct? If so, why not? Thanks again. Take care. ~ ED ---------------------------------------------------------------- Javin007: :) At the risk of boring too many people, here's how memory in a PC works: You have two kinds of memory: RAM, and Hard Drive (technically there's three, as there's also onboard video RAM on video cards, but this is primarily used for 3D video game textures, so can be mostly ignored.) Your harddrive's read/write speed is determined by the type of harddrive it is (most are SATA now) and the rotation speed (most are 7200 RPM, though the specs for your system say yours is only 5400 RPM, but there are 10, 15, and even 20K rpm models out there that are exponentially more expensive.) No matter what, harddrive memory will always be degrees slower than RAM. RAM on the other hand is a small chunk of memory that is "temporary" memory, but very fast. Its speed is determined by the type of RAM (DDR2 being the current common one for notebooks, though DDR3 is available with some motherboards (you can ignore this, though, as you can only handle 2 gigs max of DDR with your system). The motherboard will determine the limits for the RAM that can be installed.) When running *ANYTHING* on your computer, and I mean ANYTHING, it must first be loaded into RAM to be accessed by the CPU. The computer doesn't directly access the harddrive. So this means when your operating system is loaded (Windows XP) the entirety of all running processes for the OS have to be loaded into RAM. Now, Microsoft claims that Windows XP only requires a minimum of 64 megs of RAM, but recommends 128 megs. I challenge you to find me a Windows XP system that only uses 128 megs out of the box. It's not atypical for an XP system to chew through all 512 megs of your RAM, leaving no RAM available for other applications. (Interestingly, the default setup for your laptop is only 256 megs of RAM, yet yours is reporting 512.) What happens when there's no RAM left? The system has to then start trading things into what is called "Virtual Memory." VM is nothing more than a file on the harddrive that will temporarily hold information that SHOULD be in RAM, so the RAM can load more info. For instance, say you have a process that's using RAM, but you want to watch your YouTube video. As the video is ready to play, the system will take the other process's data that's in RAM, write it to the harddrive, load your video into RAM in its place, play a portion of it, write the video to the harddrive, load the data for the process to RAM, let it run for a split second (so it doesn't lock up), write it back to the harddrive, load your video into RAM and play a short clip, etc. etc. etc. The result of low RAM on your system is that applications will open slowly (seconds or minutes, instead of instantly or a few seconds) and they will seem slow to respond, will stutter, etc. With enough RAM, your system can freely open as much as it needs into RAM, and ignore the virtual memory and all the slowdowns that it causes. Now, all of this being said, NO lack of RAM will cause a streaming video to take 5 1/2 hours to play. This is 100% going to be related to your downspeed. (Go to www.speedtest.net and post your results.) RAM slowdowns tend to be most noticeable when shutting down, or starting up your computer, apps will open a little more slowly, they will be slower to respond to button clicks, and video will be very choppy. Anything that is causing a YouTube video to take HOURS will be due to the system simply waiting to get the video in the first place. RAM wouldn't slow down the receiving of the video, but it would cause the video to play weird once it's downloaded. So, all this being said, here's the summary: Your system has a 1.7 Ghz processor, and your RAM is most likely 333 Mhz DDR. If you bump your memory up to a gig, you should see a pretty significant improvement in that your computer will, overall, just "feel" faster. It'll be more responsive, and working with large documents will be many, many times faster. This won't, however, affect your YouTube experience (unless you were getting jittery video often, not the same as "buffering" video.) If you see "buffering" for a long time, your internet connection is your bottleneck. A test on www.SpeedTest.net will likely confirm this. However, if you get decent numbers on SpeedTest, then we could have something more sinister going on, though I suspect you'll find your numbers well below the 1 mbps rate. This brings us to actually changing the RAM. I've been out of the PC hardware realm (professional programmer now) for a few years, and was unable to find a manual for your particular model. However, if memory serves, this image should be a fairly accurate representation of the underside of your system: http://www.javin-inc.com/temp/thinkpad.JPG Don't quote me, but I BELIEVE the red circle will indicate the only screw you will need to remove to access the RAM. There should also be a small clip holding the RAM in place that you'll want to pinch to get the RAM out, and make sure that the new RAM snaps into place. (Sometimes you'll have additional empty RAM beds, and you can just put your RAM in there and end up with 1.5 gigs, but I suspect you'll have two 256 gig chips in there.) ---------------------------------------------------------------- 92033: Phew. Thanks again for your most indepth educational lesson. I appreciate all your help more than you realize. I attempted to answer this last night, typing in more than twice the amount of text as your to me, then suddenly realized there was a glitch and I was on another page...lost it all into the ionisphere. :-( Rather than try to retype all I wrote, I shut 'r down and went to sleep. Now I'm trying to recall all I wrote last night but failed to get mailed. I'm not a traditional typist, rather a one-finger bloke so you can understand the frustration there. I do, however, type at a reasonably good speed. With that said, let's continue. I went to search for Configuration of this IBM Laptop ThinkPad 23738TU and am copy and pasting it here. It's relevant to what I have to say...here it is: ********************************************************************************** Overview Specs Features Includes Warranty Supplies IBM ThinkPad T42 2373 Specifications Part # 23738TU Key Specifications IBM ThinkPAD T42 2373 Manufacturer IBM Manufacturer Part # 23738TU Processor Type Intel Pentium M 735 1.7 GHz Data Bus Speed 400 MHz Cache Memory Type L2 cache Installed Size 2 MB RAM Installed Size 256 MB Technology DDR SDRAM Memory Speed 333 MHz System Type Notebook Storage Hard Drive 40 GB, 5400 rpm Storage Controller Type IDE Optical Storage Type DVD ROM Read Speed 24x (CD) / 8x (DVD) Display Type 14.1" TFT active matrix Graphics Processor / Vendor ATI MOBILITY RADEON 7500 Video Memory 32 MB Max. Resolution 1024 x 768 Audio Output Type Sound card Audio Codec AD1981B Compliant Standards DirectSound, AC '97, SoundMAX Telecom Modem Fax / modem Max. Transfer Rate 56 Kbps Protocols & Specifications ITU V.90 Networking Networking Network adapter Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Expansion Expansion Slots Total 1 x front accessible Expansion Slots Total 2 ( 1 ) x memory 1 ( 1 ) x CardBus - type II Interfaces 1 x docking / port replicator, 240 pin docking 2 x Hi Speed USB, 4 pin USB Type A 1 x parallel, IEEE 1284 (EPP/ECP), 25 pin D Sub (DB25) 1 x display / video, VGA, 15 pin HD D Sub (HD 15) 1 x infrared, IrDA 1 x modem, phone line, RJ11 1 x network, Ethernet 10BaseT/100BaseTX, RJ45 1 x display / video, S video output, 4 pin mini DIN 1 x microphone, input, mini phone mono 3.5 mm 1 x headphones, output, mini phone stereo 3.5 mm Miscellaneous Features Locking device keyhole (cable lock), administrator password, hard drive password, power-on password, asset ID, IBM Embedded Security Subsystem 2.0 Compliant Standards ACPI 2.0, ACPI 1.0b, FCC Class B certified, CE, MPR II, UL, BSMI, cUL, NOM, VCCI-II Operating System Microsoft Windows XP Professional Software Included Adobe Acrobat Reader, PC Doctor, IBM Rapid Restore Ultra, IBM Update Connector, InterVideo WinDVD, IBM Access Connections, IBM Access Support, Access IBM,(OEM) Battery Technology lithium ion Capacity 4400 mAh Average Run Time 5 hour(s) Installed Qty 1 Ambient Temperature Min Operating Temperature 50 °F Max Operating Temperature 90 °F Humidity Range Operating 8 - 80% Dimensions (W x D x H) Unit 12.2 in x 10 in x 1.1 in Weight Unit 4.9 lbs Warranty 3 Years Limited Warranty on parts and labor. IBM 23738TU Summary ********************************************************************************* NOTE...I DON'T BELIEVE THIS...I JUST TYPED FORTY MINUTES REPLY HERE and it instantly scrolled up like speed of lightning and disappeared like last night. I'll ATTEMP to try again later. So please don't reply yet as you need to read my discoveries in changing the RAM chip. Meanwhile, thanks again...take care. ~ ED ******************************************************************************* TRY #3...I'm Back :-) Your diagram showing where the RAM chip is located was right on. Thanks. Here's my DISCOVERY :-( The RAM chip installed was NOT a 512mg...but only a 256mg chip. The ads ans specs say it's a 512mg...NOT SO. I was lied to by either the manufacturer or refurbishing company who removed the original 512 chip and reinstalled a 256 chip. I was lied to by the Tiger Direct guy on the phone. There are NOT two chip slots...only one. So I now have a useless removed 256mb RAM chip. Replaced with the 1gb RAM chip I just installed. So instead of having 1-1/2 gb RAM, I only have 1gb. Here's the crux. To. go to 2gb RAM I'd need to buy a full 2gb RAM CHIP and discard the 1gb for which I just paid $39.99 ($45.00 with s/h). This means another output of almost a hundred dollars plus the $45.00 just wasted because they wont accept return once the sealed chip plastic was opened...even though I had no idea there was only ONE SLOT in this PC instead of TWO like the Tiger Guy said. Now...crux #2...this new 1gb RAM does nothing more to increase speed. I just watched a 2.01 MINUTE YouTube video which took a HALF HOUR to load, so I threw the money away for nothing, eh? There is no noticeable change except the 'speed' shows it now as 41.2 kbps instead of 40 kbps. Okay...now HOW do I get to speed this thing up to normal viewing in real time? I also saw an ad for 4bg RAM Gateway laptop with 120gb hard drive for $404.99 which is all suped-up with everything. I had to upgrade a LOT since I got this only four months ago...taking over a hundred hours to load it, like Internet Explorer 5 to 6 and then to 8 and now to 9. I'm using AVAST Anti-Virus, after trying for 23 hours to get ADVAR, then find out it didn't load because of problem on the servor's end. Added Firefox and upgraded twice. Loaded MS Protection but it created more problems so I deleted it...now with AVAST which I like. Soooo...I've literally spent over 200 hours to get this thng where it's at now, plus the wasted money for the upgraded RAM chip.and I still don't have increased speed. HOW do I get it? IF the processor has to be changed does this mean I have to gut the thing and install a new motherboard? If so, what kind of money cost are we talking here? I bought this four months ago as a refurbished unit only because I was able to get it on payments of only $25.00 a month. If I had to wait to get $400.00 cash I'd never have it. :-) Okay...that's it for the moment. Thanks much again for your help offering and detailed instructions...appreciate it more than you realize. Best Wishes And God's Blessings To You And Yours In Everything Always. Most Respectfully... ~ ED  ---------------------------------------------------------------- Javin007: Well, let's start with the RAM. If you're running windows XP, you can assume all the extra processes (virus scanners, and whatnot) will be eating up about 512 megs of the RAM. First thing to do is check DXDIAG again (start/run) and verify that it's now reporting the correct amount of RAM. (Don't be surprised if it's like 9 hundred something megs or slightly more. It won't report 1024 or 1 gig.) This being said, that will leave you with the other 512 for your applications. This box won't be running the latest and greatest 3D games, but I suspect it was never intended to. If the heaviest hitter you'll have running is along the lines of photoshop, the 1 gig of RAM you have now should be plenty sufficient. I wouldn't worry about getting 2 gigs. Not for this rig, anyway. Also, Avast is a great (and free) virus protection, every bit as good as Symantec's Norton, so good choice there. If your youtube videos are choking out, we need to start by verifying that it's an actual speed throttling problem. Go to www.SpeedTest.net and run the speed test. Come back with the results.

Topic by Javin007   |  last reply


Beware of the new Email scam!

Recently I noticed that one my Emails accounts got some unwanted attention.Both in the standard folder as well as in the provided spam folder I started to collect Emails.And I don't always mean from senders I knew or webistes I am registered with.My usual approach is to just delete what comes from unkown senders or has a suspicious feeling to it.So no winner got it all crap, no offers, no invitations...A few however seemd to originate from some well known "things on the web" - and some of them I am registered with and get ads, offers and such.Sadly that resulted in some Emails being looked at and then discarded anyways.I kept deleting those unwanted mails without opening them for a few days.They they magically changed ;)Websites I used and especially those that require login details appeared as senders.Nothing with any vital info in the preview but also no real activity from my end on those websites.Then I made some impulsive buys on Ebay :(On top of the usual Emails I also got some "reminders" and "seller offers" added.Never happened before and certainly not activated in my Ebay account as feature.And unlike real Emails from Ebay there was my account name missing.Instead a conviently placed and highlighted shortcut button to "You account login" was provided.Ok, fake, forwared to Ebays spam team and quickly confirmed as spam.Moved and only hours later I got more Emails with similar tempting offers as buttons to confirm something that requires me to login.And now from websites or services I actually logged in to this day.The wise donkey said: You have something on your computer that shouldn't be there!Reboot from a CD to have the hard drives checked for malware - negative captain :(Ok then must be something within Windows, time to use a system restor point for a few weeks ago.Again nope...So I used a different browser and quite few websites and services that require my login details.No new Emails... with those websites.Kept using this brwoser for a few days and only stuff I already had cam again a few times but overall far less spam mails.Used the standard browser for a few hours with some login requirements and within a day I had corresponding Emails for a few of them.Found several bad tracking cookies in my browser.Bad in terms of redirecting all visited IP addresses to some addresses I can't even find.Deleted all cookies as well as the browser history.Reboot...A closer look at those suspicious Emails revealed that some include a thing similar to the old single pixel tracker.If you open them and not otherwise prevented it will result in some webservice knowing you actually opened the Email.Together of course with your Email address.The headers were good fakes too so the real sender is properly disguised.Those bottons and links mostly went to websites my browser protection already knows and prevents.Some however did not.In a sandboxed browser I was able to get onto some more or less convincing copies or the originals websites login page.The addressbar always started with originals name but then had a lot of cryptic stuff added to it.Sandbox blocked all what would otherwise make it throughcame through but the browser was rendered useless in the sandbox after I "logged in".Did another check and confirmed that all links buttons and such on that "infected" website also cause the same browser crash.Only difference was that only WITH something typed into the login field the browser tried to establish a new outgoing connection before getting dusted.Conclusions:The malicious Email provides the IP address used.Most if not all links within such an Email end on malicious websites.Some, especially at the beginning don't!!Instead the links go to websites that use cookies and other stuff normal protection mechanisms overlook.Somewhere between opening the link and closing it or the browser a change is made.Either you get a popup windows looking like some advertisement or when you start your browser the next time you see some website added that was not there before.The spammer now know you actually bothered enough to follow at least of the faked links provided in the Emails.The added bonus tracker provides ongoing supplies of websites you visit.A lot still use things in the address bar that identify them as a login page, even if it just starting with HTTPS.Popular websites and services get faked copies on servers in the dark web or at least outside normal DNS services.Now the spammer adds more and more Emails faking things you login to when using a browser for it.Until now nothing too bad or irriversible happend.But get fooled and actually click on a link in one of the new spam mails and it might be over.In the "best outcome" you would be locked out of your browser and have to delete it in safe mode or attempt a manual removal of the hijacker.A bit worse is if your protection started to fail and instead of the hijacke you end up with something manipulating your system.Really bad would be if you end on faked login website, and safety fails until you are locked out from your own system.Don't know what Email you might get after that and what demands to fix your system...However it gets worse: Like the one before but when enter your credentials and hit the login button the website jumps to some random Youtube clip or Goole search page.In case you wonder: You just gave the spammer your personal login details for said webiste or service....Most "deadly" would be if you end on more than just one like that.Every single one give the spammer a new login that you might pay for or that includes even more senstive data.Having to format and re-install all sudden is a thing of far too late then.I do not know if there was an Email I clicked on first, an infected advertisement or even some leaked Email addresses including my own on the internet for sale.All I know for sure is that those tracking options in the malicious Emails correspond to tracking stuff in the browser.No virus, no real malware until you click on the wrong stuff.Anything to prevent this from happening?Whatever you do: Do not use anything that requires the internet! - Just kidding!! Relax...1: Never click on anything inside mails from sources you don't fully trust! If in doubt copy and paste the link into an editor and check if it identical to the real address! Usually you would find some random stuff after the dot of the address name where you would other wise see .COM or .COM.AU.2. In case you ended on some spam or fake looking website anyways you should delete the cookies and browser history. The history might not be required though.3. Best would of course be to only allow known and trusted cookies or to not use any that survive a restart of the browser.4. Very important! If you start to get those Email very shortly after using it to create an account for something on the web then please provide the website you registered at with that Email address !!!5. If you get faked Emails for things you are actually registered with then please consider to imform the admins or support of this website about it. You might not have clicked on it but some user there might if nobody places a warning ;)What if all went to a total failure?I assume why you made that backup of all vital data and kept it updated?Also how install your operating system, in my case Windows, again.A hijack is easy, a fully infected or even encrypted system not.

Topic by Downunder35m   |  last reply


Is my book good ?

Well i hate to bother anyone but can you please take some time to read this book i worked hard on ? i spent  countless hours of my free time over the weekend developing the plot and creatures so can you please take some time out to read the whole thing tell me what it needs or what would be good i already am 16 pages into the sequel so tell me if this is good so i can post the sequel ! enjoy Times come by Alby Chapter 1- beginning It was the night I would never forget,the night.......i....the......the last night I would enjoy life. It was spring of 2017 the night air was heavy in my lungs and you could faintly smell the BBQ and charcoal smoke from cookouts that died down hours ago I could here people talking and having a good time but I think my drink I grabbed the wrong beer it was Sarah's it was spiked I never would have noticed who did it at least it wasn't her to drink it. I simply enjoyed the sky line of Chicago filled with sky scrapers and mirror like office buildings it all seemed like a Bokeh picture to me the drug is taking affect on my body I feel dizzy . I hopped on the train, it was empty as for the weather gave a good reason to walk but I needed to get home safely. In about 30 minutes I was home. I clumsily walked up the stairs and almost fell it took about ten minutes before I opened the door, I then plopped down on my bed and ran to the bathroom and regurgitated everything I ate that night. i starred at the ceiling. I saw every detail to the nearest centimeter and then blurry the specks the marks swirled in my vision and I felt weightless for a while. I starred at the clock and noticed it was about 4:00 am and cursed myself for going to that bar with Sarah I threw up all over my bed. I tried to grab the phone to call the paramedics but I fell and hit my head on my night stand. I passed out from the concussion i fell into a deep sleep a very deep sleep. Chapter 2 Change I wiped the crust out of my eyes and felt my head a sharp pain rippled thru my scalp it was a Gash about two inches in length. i walked into the bathroom I pulled the faucet but all that came out was a wisp of air. I snatched a baby wipe and cleaned off my face I cleaned my wound with alcohol the sting ive gotten used to I used to get hurt pretty bad in the army, I got shrapnel in my knee and they sent me home the first year. I noticed a dead silence on the street I thought they probably closed it off for some type of repair. I put on my white tee shirt and noticed its softness and how it fit snug on my semi-muscular figure I was in good shape for a twenty-four year old, my mom would always tell me most of the people in America are fat but I guess she loves to tell stereotypes for what they are. I put on my jeans and not forgetting the belt this time either. I snatched my keys off the kitchen counter and headed for the door. I walked outside and paused too look at the empty streets filled with litter and carnage . My mouth wide open in amazement I asked myself what happened and pondered the different reasons riot,panic,fire what could cause such a mess, I walked towards a police squad car and smelled something rancid I slowly proceeded, I instantly veered back in panic I could not believe what I saw a dead police officer lying face down with half a chunk blown clean off his head. There were pieces of it every where splattered on the windshield and door of the police car and some on the concrete. I instinctively inched towards him and thought to myself that something bad is happening and I need protection. I unhooked his holster off his waist and placed it on mine I pulled off his Kevlar vest and put it on weirdly enough it barely was messy or smelled bad. I checked the pockets of the vest and took out a pair of keys I knew it belonged to his squad car. I first popped open the trunk and saw it glistening in the sun a Ar-15 assault rifle. I picked it up and the memories of my army training it just instantly popped into my mind. I guess it applied the same here, I slung it around my back and walked into the silence. I took out the pistol put in the clip pulled the slide back and switched the safety off and cautiously held it. I believe the gun made me more nervous than whats in the shadows, I walked down the narrow street and saw it the skyline of the city filled with smoke and fire. I stood in anger and confusion my home town ravaged broken and charred blood stained the streets and walls, but why.....why....how could this... I mean what could....d..do such a thing. I walked away in the opposite direction and then cut into an alley way to piss and paused as I heard a roar I looked up and saw a quick glance of the belly of a apache attack craft it quickly zoom by and then another. I looked away and ran out of the alley and then down the street to see what direction they were heading. They sped towards the lake area and then I saw a tiny black object fall horizontally from the choppers belly and it slowly fell, then a explosion. I could feel the vibrations. the explosion ripped the lake area into nothing....nothing..but....but...smoke. My heart skipped a few beats thinking what if the next one falls in this area I quickly broke my daydream and bolted as fast as I could as far as I could until I saw a woman crawling on the concrete she was Moaning and holding her stomach. I came up behind her and asked for help. She turned on her back “ Sarah? Ohh my god sarah are you okay ?” and she held a gun in her hand a Glock 22 model the slide locked all the way back and no clip in the gun. I kicked it out of her and and sprung on her she begged for mercy “albert you have to stay away from me im turning” she saw that I was armed and quickly told me the gun was unloaded and that she was sorry she told me she would do anything just get away from her . I told her “Im not here to hurt anyone I just want to help” I starred at her beautiful figure her perfect face and thin hourglass body but ragged cloths and red eyes from crying. How and what did she go thru that could turn her into such a wreck. She got up and put her arm around my shoulder kissed me on the cheek and passed out. I dragged her to an fenced off alley where there was a mattress I put her down and sat next to her .she hugged me and began to cry she than jumped on top of me “Sarah what are you doing no we cant do this now no!” I told her I will help her but I dont think she understood a word I said. She looked at me in my eyes I could feel her touch my soul, her blue eyes glared in the sun. “i dont want to die alone please” I stood up nervously, I was concerned for her health when suddenly I heard a bang then felt a sharp pain in my leg. I collapsed in agony and saw the cause of my pain a bean bag round I looked up and saw a gas mask wearing figure he shot me with another bean bag round in the knee, from his shot gun he then walked over my numb body and. picked up both bean bag's and threw it aside two people in hazmat gear grabbed Sarah and took off her clothing I screamed “what are you doing to her!!!” they did not acknowledge me they looked at her body like they where searching for something. Her passed out figure limp as a rag doll they removed her pants then her underwear I screamed “No!! you son of a bitch don't do it ill kill you” they studied a bite mark on her upper thigh they made some type of hand signal and left. the soldiers then they came and started pouring gasoline on the mattress and her body. the one with the kriss super V took his cigarette out of his mouth and then flicked it at her it rolled of of her shapely belly and hit the mattress her body bursted into flames and she spasmed and kicked wildly. Then the man pointed it me and said in a British accent “ knock that fuckin Yankee an put em in da ACP double time, thoes hungry bastards are comin” Chapter 3 world gone mad I awoke on a bed in clean clothes and a hair cut. I stood up and walked into the hallway and noticed that this was a hospital. Suddenly a hand grabbed me. “aey where do you think your going ya damn runner rapist” I starred at him & his arrogant look and heavily customized ACR bushmaster. “get the fuck away from me im leaving what ever the hell this place is” he then sprung up and pushed the barrel of his ACR into my neck. “look if you want to get devoured by those runners be my guest buddy but dont go exposing this place to the infection” I looked at him like he was retarded “infection what infection and why the hell is the army bombing populated areas” he looked at me the same way. “ where were you 2 days ago ? There was a virus it was originally H1N1 but it evolved up to 10 times now its got Chicago by the balls and its spreading across the world as we speak turning everyone into animals devouring and ripping people to shreds and then the virus takes over the dead body and brings it back as a runner also know as a fresh undead body that has the ability to run or sometimes sprint god forbid but after 2-4 weeks without food the tissue breaks down from constant use without fuel and they start to get slow and shuffle around” my mind felt overwhelmed I wondered how my parents were doing in Dallas. “so what am I supped to do here but be a waste of space” he grinned. “well you obviously know how to use a weapon and our records say you have been in the military. you cant take care of yourself out there so we will make you part of out kill squad. “kill squad ?” “ohh shit you mean you have never killed or seen any infected yet ? that means your fresh you can be put to good use in our kill team” he told me his name was henry the specialist of his team kill team Charlie-mike. He directed me to the staff sergeant who looked at me and said “well well well we got some fresh meat hope you ready for 3 months of hard core trainin cuz this wont be easy now get yo ass in the garage and clean every APC tire the armory I think the kill teams ran over a little too much runners” 3 Months later........ the training was more rigorous than the basic military stuff a the armory where there was at least a 100 others conversing and grabbing into boxes of gear. Henry took me to the gunny of the armory where he helped me choose my gear. I picked up dragon skin Kevlar with implanted ceramic & alloy inserts. I took some gloves which I cut the fingers of. My boots where the basic digital camo color probably a left over from the war in Iraq which ended several years ago when our president simply drew the troops out. And European troops and some Russians finished off the big time terrorists soon after we heard no more from any our genocidal efforts finally payed off. I went to the weapon stand where I had to fill out a ID sheet to make sure they knew I had training with combat rifles. I chose the ACR which was in stock by the thousands as a gift from the weapon companies to the American army. I pulled all the safety clips and then grabbed a eotech scope out of a box and locked it onto the rail system of the weapon. I attached a mag pull the every one of my carbon strength reinforced clips. The gunny looked at me with a grin and we left for briefing. Chapter 4 things get messy we met up in the garage of the hospital every runner hunter of this kill force a total of 300 men and women in the huge elevated parking complex of the hospital, a general arrived in the elevator his chrome glasses shined in the evening light so did the many badges pinned on his suit which fit his old figure rather awkwardly. he had two formally dressed men with him they both had desert eagles on there side holsters but the general had a FN 2000 slung around his back. it was worn and scratched its polymer body was embedded with and insignia that I did not see so well as it was obscured by the scuffs and grime he looked at us and smiled his mouth opened and he flung his cigar off the ledge of the building he then begun and explained in a dominant voice. “there are 40 spec op Humvee's set up in formation ready to patrol the streets of Chicago you all will be in sector 6 the most dangerous sector of Chicago but no need to worry we have full fledged firepower of 4 APC's which will Carrie your kill team to your objectives take as much time as needed the runners arent going any where. you will clear the sears tower area a hot spot for runners. look all you men and woman, its time to revolt and fight back. its time to say we will not be scared, we will not be intimidated, we will win back our freedom!!” the whole complex light up with cheer. As the two men in formal wear took out PDA's and started directing people to there kill teams the first man shouted “ Chavez,Williams,buck, and,Samson go to APC #1” I quickly advanced thru the crowd to APC 1 I slowed my pace and saw its matte paint job of digital camo and its pop up dillan machine gun turret mounted on top. I pounded on its steel behind and its back door unlatched I stood waiting for the rest of my team I saw all three walking in a line towards the door I saw him ,the man with the kriss super V he smiled at me and said “no fuckin way you tha yankee we picked up in tha alley way you mad cus we killed your little runner girlfriend” I sprung towards him and grabbed his collar and punched him in the stomach then elbowed him in the mouth all the color drained out of his face. “ if you wouldn't of shot me with a fucking bean bag I would of blown your brains out back at the alley” he looked at me and with blood dripping down his mouth “i was just doing my job. welcome to foxtrot 3 by my names john samson you can just call me hunter” I let him go and he limped into the APC then another walked towards me he wore a Grey baklava and tight fitting clothing and a vest that barely covered his chest which awkwardly bulged out he walked towards me and took off the mask. She looked at m surprised face and said “what ? a woman cant be in the military” “well I..I...I just did not expect to have such a high rank personnel on our team” she looked at me and frowend “were both specialists grade one my names Kelly williams” “a heavily armored male in a hijab walked towards me playfully he came up to me and pulled off his hijab he was a African American . “hey specialist now look Im basically here to keep the moral you catch me ? I was in the navy im Ricky buckman Just call me squid now what do you want to go by kid?” I smiled “echo” “nice choice” Albert “echo” chavez I thought in my head I figured that sounds good. We all jumped in the APC while a kill team of rangers in a heavy Humvee with a mounted sentry gun rolled behind us as the whole convoy of kill force 6 prepared for battle. I thought about all my training aim for the head,short controlled bursts a shot anywhere else just stunned them. They move fast so they have to be neutralized if you get bitten or infected kill yourself with the poison capsule that was given or a team mate would do it. I grabbed a Kukri blade off the weapon rack that was provided in the APC I looked at its razor sharp edge its brushed steel surface reflected no light I sheathed it and strapped it to my leg. I caught the eye of Kelly who was fiddling around with the UAV control panel she looked at me and smiled. The APC's lights blinked red prompting us that we are in a hot zone. The APC vibrated as the co pilot took out a pack of runners with the Dillon remote controlled mini gun. We all loaded our weapons and packed up some ammo. Hunter and squid looked at each other and they bumped fists. I put a clip in my ACR and cocked it I turned on the eotech scope and strapped on my helmet and then slid on a black baklava. The APC driver prompted a alarm which was the signal that the door was opening, the big metal door slowly lowered its platform to the ground and we all got out Kelly was the last one out she grabbed that control panel and slid it into her bag she ran out and flipped the close button on the APC. We met up with the four other teams in our sector who already exited there Humvee's. A black Humvee that I never knew was in the convoy rode up and a military adviser jumped out and barked orders like some scared little dog and then jumped back in glad that he wasn't us. He positioned eight snipers on the roof who where each divided into teams of four they zip lined up the roofs and soon each team where picked up by two little bird helicopters the rest of us where on the ground either Humvee calvary hit teams or long range grenade support foxtrot was positioned on the magnificent mile at least it was magnificent. We cautiously walked down the street with another team of 6 watching our back and little birds with snipers covering us and telling us where the nearest pack is. It was empty until we got a report a pack of twenty runners where heading straight for us about 3 blocks away we had about a minute to prepare, snipers took out some and only six broke there steady aim and where 5 feet away, I drew my weapon and just before I could fire a Humvee rammed half the pack of runners over my team shot at there heads to finish them off . I stunted back and fell startled by a runner with broken legs dragging its smelly corpse towards me, my team did not even notice as they where pre occupied with finishing off the pack it grabbed my boot and pulled itself onto my chest I pushed it back and hunter tackled it and shot it once it grazed its ear he then rad up to it and curb stomped its head in over and over, like an egg it crunched under his boot he then walked towards me and picked me up and then our comm's screeched with a danger code: sector red REPEAT SECTOR RED!! this is not a drill!! squid looked at Kelly “OH shit radio the APC radio the APC!!” Kelly hastily radioed the APC and it arrived around the corner ASAP she got in and took the panel out of her backpack all the rangers got back in there Humvee's and formed up a line of vehicle's and the APC was in front we all jumped in and squid popped open 3 of the four combat hatches. We took stance and poked our body's out of the hatches while Kelly was typing away at the panel. “Kelly get us that predator drone NOW!!” “on it Echo..about.....NOW!! get ready for some boom boom boys” she said over the comm a predator drone deployed from a building somewhere and roared across the city's night sky. The little birds shot flares into out immediate area and the military advisor said nervously over the comm “formation green zone ASAP make space for one more hummer!!” his hummer screeched into our circle formation at the middle of the block intersection. We all could hear the uproar and the screaming rage of the Runners it was 9:00 PM and my stomach dropped as runners came at us from every angle swarming in between all the vehicles as we took out as much as we can the advisor yelled. “Break formation head for lane 3 of sector 5 Kelly yelled “but thats a dead end we have no where to go !!” “exactly now MOVE !!” we hastily rammed out way thru the crowd of runners it was easily about 200 to 300 runners we reached the street which was a dead end it was blocked by a collapsed building from all the beach bombing runs. We waited for 5 minutes until we saw it our doom three times as much runners appeared and headed for the convoy. The driver looked bewildered “Get ready im breaking position” he advanced the APC towards the crowd its massive tires gripping the rubble and concrete so agile and quick. He opened fire the Dillon mini gun until there was not one round left. the APC swiveled madly like a dog chasing its tail, all the blood and body matter stuck to the tire made it impossible to control. The whole interior rocked forward on impact with the flipped car. suddenly a screech and the APC flipped over on its side. the runners ignored the APC and went for the group of Humvee's ripping the rangers out that had not locked there Humvee door and devouring them. We herd the screams despite layer after layer of Kevlar and Armour of the APC. My radio started to squawk. “ Pindad Panser down repeat,flipped on its side calling in little bird for support !! bring in UH-60 shadow for medivac ASAP!” I groaned in pain the impact was hard,i could taste blood in my mouth my world was spinning. my team mates did not move they where all laying face down. I soon passed out Chapter 5 delta crimson “Delta crimson GO GO GO !!” I awoke in a sweat, I felt normal again I wiped my blood crusted face off. I leaned up and saw them. “Squid Kelly Hunter Your all alive !” hunter smiled “the crowds not givin up. Hurry mate we got to get outta this APC or crimson is just gonna have to save us” Crimson was an elite rescue squad of some of the best rescue force members in the military marines,rangers,green berets, you name em they can save you. Suddenly we heard the roar of helicopters. Then the door of the APC light up and blew of its hinges a soldier in a crimson baklava shined a light me and my team he latched two metal hooks onto our APC and then the helicopter lifted us into the air, this vehicle the best attack helicopter crafted by the engineer crew over at Hudson base they called it the Shadow because thats all it was, a quick killer in the night. A man made machine manufactured to kill and thats what it was best at. I broke for the chopper and jumped in then squid then Kelly it started to take off right before it left ground hunter grabbed the bay door and climbed in. “forgetting something ?” He threw me my ACR bushmaster which started to look like the generals FN 2000 it was scuffed and marked in every crack and crease. A crimson medivac specialist handed us some refreshments and snacks he said he picked it up at his last raid. He gave me some meds, adrenalin shots use them as a last resort of energy he said. I looked at squid who was holding his dog tag “ man echo you see how that APC flipped on us I almost crapped my pant's” I laughed at the joke even if its not funny my team needs the moral. I looked it the pilot he caught my stare. “where going to the main objective” I sighed and looked away hunter looked at me and made some type of hand signal. “hey Kelly you think we could of died back there” “easily hunter luckily the runners did not find our APC interesting” I looked over at Kelly who was looking at the cracked screen of the control panel. “hey Kelly what all did you use that panel for” “i saved the whole platoon with this thing while you where taking a nap, now its gone and base is a long fly away. The screen broke when the APC flipped. And the predator drone crashed without me controlling it” “damn, nothing good ever lasts long does it” “well echo thats not true your still alive aren't you ?” I we both smiled and when the happiness broke it was back to work. chapter 6 Raid The shadow landed on the roof of a building about 3 blocks away from objective R.R.T.R (runner ruled territory raid) our forces had to kill all runners and take back the sears tower. Kelly was stationed on the roof with hundreds of other snipers .with her barret M82 which ripped into 2 to 3 runners at a time with its large caliber amour piercing rounds. Military advisors sent Ground troops they marched the streets for the main attack on the R.R.T (runner ruled territory). Soldiers of all pact creed and faction marched side by side. the ISF (Iraqi Security Forces) the IRA (Irish Republican Army) even the CIA and DEA forces were marching along with whole police precincts including the bulk of the U.S military. This battle was inevitable and we are going to win.

Topic by albylovesscience   |  last reply