Semi auto

OK my Dad took a hand-gun safety coarse and he got to use a Semi Auto, He learned how it was semi auto. when you cock it once it loads a bullet and the firing pin is pulled back. Bang you fire! the the recoil from the gun re-cockes the gun!and you fire and so on!

Topic by Metal4God   |  last reply


semi autos

I have an idea knex semi auto system for a gun i havent tried it but hey it might just work if you put a springy spring on the ram with about 7 elastic bands and when you fire the force from the elastic bands will reload the gun because the spring springs the ram back (you will need a auto load system) if you have any more ideas post tem and let me know ill try he gun idea of mine and ill see if it works

Topic by 360XXXKNEX   |  last reply


Barrel For Semi-Semi Automatic Knex Guns

For those of you that dont know Semi-Semi-Automatic or whatever else you call them, are the guns that when you pull back the ram rod a new bullet falls into place and you pull the trigger and it fires. Well almost EVERY type of (im just gonna call them Semi-automatic) semi-auto gun has a barrel consisted of tan pieces meant for locking into place wheels and such. What i posted this forum for was because ive only seen one other kind of barrel like that and that was the one of Perfect Duck. I wanted to know if anyone had any other barrel ideas for a semi-auto gun because i only have enough of those tan pieces to fit a blue rod so..... thank you if you put any input in and please comment.

Topic by knexster   |  last reply


Help (Semi-Auto)

I really need help on designing a semi auto mechanism. Any Ideas?

Topic by HBF   |  last reply


Ooda's Semi Auto

Pretty boss.

Topic by GrandeSwag   |  last reply


Semi-Solid Material? Answered

I was hoping anyone knew of or had a good suggestion for a material that fits my description. Either a rubber- like material that was softer (more malleable) than rubber, but tougher to prevent tearing or a putty-like material that would change to a firm solid when heat or a current was applied. I need something that can be molded to a specific shape and then hardened to hold that shape, but can later be returned to the non-molded shape.

Question by Sserdna   |  last reply


Semi-adhesive materials

Hi, I'm looking for some suggestions of what I'll call (out of ignorance) "semi-adhesive materials". I am looking for a large sheet that can be folded, or preferably tightly rolled (think a window blind) and a variety of shapes that can be stuck on and repositioned. I've had a look at display felt for use with hook and loop stickers. The felt is quite thick and expensive. I'm just wondering if anyone else has experimented with this kind of project. Flexible magnetic material, or some kind of static attraction or something? Cheaper the better really, but durability is a big concern too. Any pointers in directions to look would be greatly appreciated.

Topic by shockerty   |  last reply


Semi auto MP5K

Hello everyone, i am back agian, with something non generic. I've seen to many basic "slide action" and simple "pin-pull back" guns. Usually, replicas that look good, often can't shoot, and most ugly-looking guns have a unique mech. I decided to combine the two, and make a decent looking mp5k, with a semi auto mech. The mech is different from my semi auto vector's mech, because the trigger is much more stronger than before, and never breaks. This is an unfinished gun, so will post instructions later. Pros and cons: Pros: -semi auto, original idea -magazine with internal pusher -super good looks (compared to my airsoft MP5K) -I kinda perfected the front sight -excels in CQB in knex wars (if you are going to have one) Cons: -hard to pull the trigger -shoots below 20-15 feet -a lot of cut pieces -cut pieces are needed (unfortunately) sorry guys ;(

Topic by CODawesome   |  last reply


Knex Semi Auto

When you think about it, there is no possible way to make a good, strong and cool lookinig semi auto. Unless it has multiple lbarrels, then it Is impossible. Why Try then?

Topic by Bartboy   |  last reply


Semi Compostable Wallet

Hey guys I just wanted to share what I'm working on right now. I was going to see the community's feedback on it. Right now I'm making a semi compostable wallet. I'm making it from the new sun chips bags. Now I say semi cause I'm also using some clothe, tape and thread. So I was thinking and wondering, should I make a semi compostable or should I just go fully. meaning nothing but sun chip bags (Although probably still using some thread to hold it together) So please feedback. Positive if you can. I'm making it for fun and other reasons. One of my favorite reasons is if people ask why. I could tell them when I'm done with it, I can leave it outside and soon it will compost. I'm hoping to make it a green wallet, not the color but in the since of being earth friendly. Thanks guys, hope to here from you all.

Topic by Onkei 


HV1 - semi auto

Hey, I new to the site. I would just like to say I was looking around, and enjoyed viewing everybody's creations. I've also been making K'new guns since I was pretty young, and I still enjoy making new creations to pop my friends with (lol). Anywho, this is one of my more recent guns. As you can see by the look and style of it I've always designed my guns around functionality rather than looks first (making the shape of another type of gun). I believe this makes my guns pretty unique. This one I made is a semi-auto, and the hopper holds up to 34 rounds (red rods). I am currently tweaking it to be fully-auto, but this is good for now.

Topic by SNIPERDUDE   |  last reply


BEC and Semi Conductors

Hey everyone, I don't know if this is right, but today I came to the conclusion that everything in the universe is a conductor or a semi conductor. Is this right? I was thinking if you were to turn something into BEC (Bose-Einstein condensate), (which I know is at the moment impossible), the electrons/current should be able to move through the substance without any resistance. With this being said, couldn't any thing and everything become a perfect conductor if reaching absolute zero is possible? This is just a thought, but I am very interested to find out for a science class I'm taking.                                                                             Thanks for your time KayakKid.

Topic by Kayak Kid   |  last reply


semi-steampunk garden?

HeyCan any of you think of a way you can replace (electrical)machines in a garden with its mechanical equivalence, while at the same time making its replacement low maintainance?It can also be decorations. Basically create mechanical stuff that looks good in a garden.Some devices that may be workable:+ A water timer that uses a mechanical clock that powers a mechanical valve, and its mainspring is recharged every time the water rushes though it.+ A passive water pump that is made of a black plastic water bottle and two valves. When hot, the air inside pushes water out. When cool, new water is pulled in by the cooling air. It can be used to pump water slowly to a 'not' so high location.+ A sterling engine can be used as a more active solar pump to pump water to a higher location, however its use of moving parts means it more likely to break down than the 'passive pump'. If it requires a kick start to run, then place a mini turbine to provide the starting force.+ Use the above pump to create a fountain+ Perhaps as a replacement of solar powered markers, get some crystal that emits light when shaken("which quartz i forgot..."), and get it to shake around automatically.+ Mechanical garden music box would be a nice addition(wind powered music box). Double points if its either reprogrammable, or plays a different instrument such as drums.

Topic by akimbo m   |  last reply


my TRUE SEMI-AUTO knex gun

I maked a semi-auto gun outta knex and i migth post it it... :D it works with a hammer pushed back with the trigger when the trigger is pulled it will pull the hammer back and the green rod will fall in and then when the trigger is realised it will fire i will post it as soon as i get a camera :) (thats why i don got pics lol)

Topic by ryan knexer   |  last reply


posted

Yay! finnaly posted my semi-auto knex gun i think its a new design because it uses a hammer :P be sure to check it out!

Topic by ryan knexer 


semi auto knex gun? Answered

I have made a semi auto knex gun but at the moment it is full auto for the fact i pull the trigger once and the elastics fire of so fast the trigger cant get time to lock back into place to give the mag pusher time to load the next round. does anyone have an idea of how to slow the mechanism down?

Question by pinderfish   |  last reply


New True Semi Auto

This is my new true semi auto. it shoots little green knex rod. yes it is the second on the site but this one is for beginners. it doesn't use many pieces and is easy to use... it has a few mis firing problems which i hope to clear up before i post instructions.

Topic by iKill   |  last reply


Semi-Auto Knex Rifle.

I've been working on this gun a long time while bouncing ideas off Mepain. It's a TRUE semi-auto in the fact that all you need to fire a shot is to put the piece in the gun and pull the trigger. I was able to unload a full magazine in less than 10 seconds. I'm a lot more likely to post instructions on this gun than the last two, because this gun works so nicely.Holds 13 shots.Shoots up to 40 feet.Shoots grey connectors.

Topic by oodalumps   |  last reply


My TRUE Semi auto

The Semi Auto I have came back to my semi auto, I made one when I first started knex, barely shot, not reliable at all, I've remade it over the past 4 days, it has a new mag, new system, new internal mag pusher and new way of loading. Pros Semi auto Removeable mag Internal pusher Takes less than 30 seconds to detach the mag, load 14 bullets and re-attatch the mag Not many pieces Shoots in an almost straight line Cons Bad range (around 7-10) Not that reliable Jams if not fired right Uses 11 Y clips

Topic by yerjoking   |  last reply


Good knex semi auto? Answered

Looking for good semi auto knex gun. have searched all over. cant be a rubberband or psuedo semi auto. must shoot far has to be less parts than  Connectors 100 half moon 20 snowflake 40 orange 2 siders 10 blue stubs 70 grey 1 siders 30 green Rods 70 grey long 60 white 50 yellow 80 red 50  blue 90 green Misc 20 of each ball socket type 40 blue spacers 20 grey spacers 20 tan clips 30 of the little black hands

Question by ynohtna1   |  last reply


Semi Autos (Face the Truth)

Semi auto guns are very cool. I agree but we have to face the facts. The way a real gun works is the pin hit the primer on the bullet igniting the powder and the extra gas is used to release the shell and load another bullet. How can we replicate this powerfully. Even today real bolt action guns are more powerful than semi autos. I am afraid to say that is just isn't practical to make that out of knex.

Topic by Mintyhippo   |  last reply


Proper Semi-Automatic Rifles

Ive been on instructables for a while now but it seems that the only peron who has ctually posted a semi automatic gun is oodalumps, Im jus askin if any1 could build a properly semi-automatic rifle (Semi-auto means that all you have to do is pull back the trigger to fire and it fires one at a time, so its basicly a 1 round at a time machine gun)

Topic by Juls   |  last reply


Knex semi auto pistol.

This is oodalumps new semi auto gun. it fires about 25ft max and has a 8 round turret. you can also put an 18 round turret on aswell. i built it in metalics because it looks cooler. i also slightly modefied it. let me know what you think! (i give oodalumps 100% credit)

Topic by ~KGB~   |  last reply


RBGs- True Semi-Auto or Not?

Alright so I'm having a "civilized discussion" with Mykhailo/whoever you call him now and he's arguing, just like plenty of others, that RBGs are not true semi auto because of the reasons soon to be listed. Comparing RBGs to real firearms (which I understand are not exactly alike in plenty of ways) I find that they're more like a true semi automatic than what you guys would call true semi autos. Just listen to my argument and see if you can at least understand what I'm saying. The majority of your arguments for why an RBG is not a true semi auto is that you have to prepare a band for every shot. Some of you compare this to cocking a weapon more than once for every shot. I find this a bad comparison. In real fire arms, the firing mechanism isn't what launches the bullet. It triggers the powder which then in turn shoots the bullet. An RBG is similar to this. Each rubber band acts as the "powder" for the bullets. The RBG firing mechanism simply sets them off. You also have to prepare real cartridges too. Does it matter if it's you or not who makes them? You still have to mix up and add the powder all the same as you must add RBs to your weapon. This brought up the argument that it's still not a true semi auto because the bullet isn't self-contained in an RBG. OK I have two things to say to this. First, now bullets decide the firing mode of a weapon? Secondly, what about ooda's RBG ammo. That's self contained, isn't it? The bullet is attached directly to the RBG. What do you guys think?

Topic by TheDunkis   |  last reply


semi-auto gun system

Hey people, I found this system for a semi auto gun. I used to built lego guns with this system (I also built a full-auto with that) and I've been trying to use it in a knex gun, but I cannot work it out really good. So does anyone how to use this kind of system on a knex gun. It works like this: You pull the trigger, the spring gets pushed forwards, the spring is compressed against the ammo, but the ammo is clicked(I dont know how to call it maby stucked). When there's enough pressure the ammo will break loose and fly away because of the power of the spring. Thats all,

Topic by Infinnion   |  last reply


Do you think this is semi-auto?

Https://www.instructables.com/id/TrueSemi-automatic-Knex-pistol./People keep telling me this isn't semi-auto. Say what you think.

Topic by oodalumps   |  last reply


post it?

Published!

Topic by ryan knexer   |  last reply


Truckers picking up quilting and other hobbies

Love this story in the Wall Street Journal about truckers picking up new hobbies due to fewer jobs. While they used to have just an hour or two between jobs, now they'll have a couple days. Now there are many truckers spending time learning photography, sewing, knitting, and more. Idle Pastime: In Off Hours, Truckers Pick Up Stitching http://www.flickr.com/photos/holstphoto/ / CC BY 2.0

Topic by fungus amungus   |  last reply


Semi-Auto Revolver Is Finally Posted

Well, now I am out of work I'm finally posting it despite its faults (which I'm sure someone can fix). So I should get it posted this week all being well. It fires oodammo, white and blue rods, the range I have not tested as it varies on the bullet locks (which are worn on mine) but it is probably only around 20 feet. The trigger pull is heavy and occasionally painful if you follow through, but who cares it's freakin' semi-auto!! :D. E VOILA!  https://www.instructables.com/id/Knex-Semi-Auto-Revolver/

Topic by Loosewire; SOE Operative   |  last reply


Knex Semi-Auto Handle Mag Pistol

I said to Mepain "I'm going to make a semi-auto pistol with a magazine in the handle". 45 minutes later I took this picture.I'll call it: SALSAS**** A** Lame Semi-AutoYes, this is a TRUE semi-auto Knex gun. You pull the trigger and it shoots, then repeat. The magazine is in the handle and it shoots gray connectors. Range is 5-10 ft, so it's not going to win any wars.Discuss.

Topic by oodalumps   |  last reply



Twin Shot Semi Automatic Knex Gun?

I've been working on this gun for about 3 days now, and im woundering if it is "unique" enough to put on Instructables. Please comment.

Topic by My Pie   |  last reply


REALLY REALLY SEMI AUTMATIC KNEX GUNS !!

Hello everyone, I was wondering Couldt someone mayby make a gun with a magg That has rubberbands in it + a bullet And then u make some trigger system that pushes smal railes Up with the firing stuff Inside the magg Thank y`all for reading and GOOD LUCK !!

Topic by beameron   |  last reply


An idea that mite make knex semi auto.

For the average knex gun, you need to cock it everytime you pull the trigger. couldnt you get a giant fat spring that could act as extra recoil? if you made a gun with a short firing pin and a few bands, with a strong and long spring, dont you think it might be able to be semi auto? If it did work eventually afta about 5 bullets the power would be lost. but still it could work? maybe not sure.

Topic by ash1494   |  last reply


semi-auto/full-auto knex rubberband launcher

A semi auto rubberband launcher. really a semi-auto and a by un connecting 2 peaces you can quickly switch to full-auto. uses a new triger system that i thought up. lets the gears turn only when you push the triger. working on instructions. i also made duel rpg pistols useing the same firing system. i will put those in the instructions.https://www.instructables.com/id/semi-auto-knex-rpg-twin-pistolsrifle/

Topic by dsman195276   |  last reply



Knex Combat Shotgun

Hello! Here is my Knex combat shotgun. Its semi auto and has pretty good range. Should i post it?

Topic by Millawi Legend   |  last reply


Barrels

I soon, i am going to make my Extrem shotgun, But this gun will probally use a barrel That is made of connectors (kinda like all the pistols). So i wanted to ask everyone What are the pros and cons of a connector barrel vs. the tanclip barrel like in my Extrem.

Topic by Der Bradly   |  last reply


Semi or fully automatic knex gun.

I know you people don't believe anything without pictures, but, I DON'T CARE!!! I have a video! I promise! Ok, this is a semi-automatic. Pull trigger, boom, pull trigger, boom. That is it, no pulling back the ram or anything. I have not made the fully automatic version, but all it needs is a motor on the trigger and it will be fully automatic!!!!!!If any one wishes to post instructions on this gun, I hereby give you permission as long as you give me credit. Watch the video here.

Topic by Whaleman   |  last reply


SAOG- Semi-Automatic Oodjamaflick Gun

This is a semi-automatic oodjamaflick gun, or SAOG. I say oodjamaflick, but it's not actually oodjamaflicks, just a modified oodjamaflick. To the uninitiated, oodjamaflicks are the original oodammo; ammo that oodalumps' made for rubber band guns four months before oodammo. Nothing special, just a semi-automatic that gets more than ten feet. Fifteen feet more, to be precise. Total of twenty-five feet. That is, if you want a four round magazine. Here's the thing about this gun, you can have a higher magazine capacity if you are willing to sacrifice some range. You could have a one shot that went about forty feet- but then it wouldn't be semi-automatic, would it? Hit the link for more pictures and a video. http://knexinnovation.net/forums/viewtopic.php?f=18&t;=989 Or a real link for those too lazy to copy/paste. knexinnovation.net/forums/viewtopic.php Yes, this is a shameless promotion for KI and it's ability to host pictures from other sites easily.    

Topic by Whaleman   |  last reply


true semi auto gun crossover

I have seen and built both ednator55's true semi auto gun and bballkidx's hammer operated pistol. The pistol swings a hammer to hit a rod and the semi a auto rotates a connecter to move a ramrod. This is more of an idea than a question but could somebody try to make a double action type gun. It is semi auto because it rotates a connecter but at the same time hits the bullet with a hammer. This would be most similar to some revolvers. This is just throwing an idea out there but I would be very grateful if somebody built this. Automatic 5 stars in my book. The semi auto gun is weak but semi auto. The hammer gun is strong and single shot. The crossover gun doesn't have to include a mag but it would be nice. Pmgroundhog

Question by pmgroundhog   |  last reply


Help semi auto Knex gun!!!

Can someone help me to make a semi auto Knex gun that shoots pieces mine just needs a mag. The more popular person to volunteer to help will be accepted.

Topic by Megatezzz 


New Knex Semi Auto Sniper

This is a first. (i think) its a semi auto magazine fed rubber band powered sniper rifle. lol. do you think i should post? p.s when i post i will make a better stock because whiners will be like : uhhhhhhhh fill in teh stock newb!!!!!?!"?!?!?!?!!!!!!

Topic by Millawi Legend   |  last reply


Need a semi upright soil sifter.

Hi Is there a design plan out there for a semi upright soil sifter. The type I need is one that stands sloping and you use by shovelling the soil onto the top of the sloping sieve and as the soil runs down it the fine parts go through the sieve and the larger parts drop down to be re sifted or discarded. I hope you know what I mean. I just want a simple frame with two legs. Cheers  Daniel

Topic by daniellouwrens   |  last reply


Fully/Semi Automatic Knex Weapons.

Hello! Sorry for the month+ inactive period. (Been having school,family,paino,vilion,etc)  Well im back with a topic. Im thinking are there any great semi/full auto mechs that involve minimal "special" pieces. And also, I was wondering how could I make a mag for my concept. Anyway please post if you think there are any great semi/full auto concepts/mechs!

Topic by The Knexer 


Is there any K'Nex Semi-Auto Pistols?

I Wanted to dual-wield/akimbo a knex pistol or something. Any good ones? PS: Does any1 know a way to make the Kinetic Rifle use less pieces or know when knexfreek will post his gumball machine instructions. Thaaanks mm8

Question by MegaMetal8   |  last reply


semi auto shotgun revolver or shotvolver!

Hi people! I'm working on a new semiauto! It's gonna be my first big knex gun i ever made with no instructions! Finished: Revolving part Needed: Rotating mech (for the revolving part) Trigger mech Body

Question by Jedi_man 


Launch it semi auto marble gun

This is my first post so i don't know exactly what to do. Here is a video of my marble gun it can shoot semi auto or single shot. i became interested in these because of spudfiles.com now i have a site that sells them it is freewebs.com/pats-spuds so you can check that out too. the gun only cost about $45 to make. in single shot at 70 psi the marble will go through a 3/4inch piece of plywood.the video is shot using semiauto at 35psi because that is as high as my pump will go. hope you like it.

Topic by launchers deluxe   |  last reply


My new semi-auto RBG

This is my new semi-automatic, true trigger RBG. Normally nothing new. But this one can take twice the amount of rubberbands. Thanks to some creative use of a red gear ( I'm aware I didn't use an actual red gear, that's because I didn't have any. So I sliced the pegs of a yellow gear ) This actually started as a mod for Dsman1's RBG, but it turned out to be something different. It still uses the system that is somewhat his, of a red gear turning a blue gear. It can take 15+ rubberbands without tearing itself apart ( Nearly does though ;). My record is about 18 or 19 rubberbands on it. The reliability isn't 100%, because there is an uneven amount of pits in a red gear (33), which are divided by 4 stages. So it's hard to get a good pattern for the rubber bands to shoot of. This basicly means that sometimes it either won't shoot, or it will shoot 2 rubberbands at once. I don't know if this is a problem with an actual red gear though, since my altered yellow is far from perfect. Do you want me to post it, or is there no demand for a new RBG?

Topic by Dutchj   |  last reply


War-Worthy K'nex Semi-Auto?

This is an idea I have had for a while now, but only now do I have the pieces to bring it to life.   This mechanism was developed 2 years ago by Luis XIV.  Only until about a week ago had I seen anything done with this amazing concept, even though it was simply the same thing with an uzi body around it.  However it was still a step forward.   The horizontal magazine is really whats makes putting a trigger on this possible.  I can see it done using a vertical mag but it would be overly complex involving a series of ratchets and several cut parts.  Its even cooler that it is a removable horizontal magazine. My overall goal it to make this a gun that would exceed in CQB scenarios.  It is small, compact, with a high rate of fire and a removable magazine.  It does get about 25-30ft but that was only with one #64, however adding any more would make for an uncomfortable trigger pull. So do you guys like it?  Should I post it? -Kinetic 

Topic by Kinetic   |  last reply