Search for stefans in Topics


Stefan Making Help? Answered

I want to make stefan darts for my nerf gun but I need help on a few things first. 1. Where should I buy Foam Backing Rod (FBR)? 2. What thickness FBR should I buy? 3. About how many stefans can you make out of 1 foot of FBR? 4. What type(s) of stefans fit in clips?

Question by DBMods    |  last reply


Selling Nerf Stefans (Darts)

Honestly I have just found out that instructables has a market place! Sorry for posting this as an instructable! Anyway I just copied all of this from my instructable: Hey Guys! I'm selling nerf Stefans (darts) for very cheap! Every Item is FREE SHIPPING (to the USA)! The prices are: $8 for 25, $14.50 for 50, $19 for 75, $23 for 100. If you live out of the USA pm me and we can negotiate a shipping cost. Also, if you want more than 100 bullets pm me. Buy it at FarmHobbies.Weebly.com. Thanks to TCBM on YT for the clip of it in action. EDIT: I changed the tip of the darts!!! Now they're more aerodynamic thanks to the dome of hot glue! Here's a picture of what they look like now: http://farmhobbies.weebly.com/comparison-of-new-and-old-darts.html.  I only except paypal right now, also please just buy them at the website i mentioned don't ask to pay with cash or something... ALSO I sell modified Nerf Guns just like Twisted, although I don't paint them...

Topic by Pizzapie500  


Use Stefans (modified nerf bullet) with Vulcan?

I know this question might sound dumb but i'm going to ask it. I am wondering if I can use stefans (modified nerf bullets) with the Nerf Vulcan. Right now I do not have the Nerf Vulcan or Stefans to test them, that's why i'm asking this. Thanks in advance!

Question by Pizzapie500    |  last reply


I need help with nerf stefans. Anybody an expert?

Alright, so i got the backing rod, got the weights, made the darts. Now what? is there anyway i can use them without modding my nerf gun? please help!

Question by meanbean    |  last reply


Does Stefan (modifed nerf bullets) work with stock nerf guns? Answered

I looked at backer rods and they have aren't hollow. The regular stock nerf bullets are. The stock nerf guns have a little stick pointing out so you can put the bullet onto it, but since Stefan bullets aren't hollow they can't go onto the stick. So my question is "Can I put Stefan bullets unto un-modifed nerf guns?"

Question by Pizzapie500    |  last reply


im selling a modified nerf maverick it is a shorty maverick singgled and comes with 15 stefan darts

The gun comes with 15 stefan darts shoots at about 50 ft cash or check only bidding ends june 12 just say how much you are offering oh and i do trade nerf guns bid starts at 10 dollers happy bidding i will make a fourm soon with picture

Topic by jonessodanerf  


my homemade

This is my new homemade it shoots pumprocket minis and stefans around 50 feet. dont know the range on the rockets but it goes really fast with a couple layers of tape on the barrel

Topic by nerfer192    |  last reply


Goosh.org - Google web shell

The unix geek in me loves this http://goosh.org , it is an Ajax front end to google that looks like a unix shell window written by Stefan Grothkropp.-Joe

Topic by joe    |  last reply


nerf paint job and modification thread

This forum is for pictuers only you can include the range and modifications if desired the pink yellow and white disc shot is my secondary and it gets 70 feet with a stefan the blue and white bbb is my primary and gets 120 feet with a stephan 

Topic by SorryBarry  


Why is MIT license not offered among the available licenses on Instructables?

Hi folks, why is MIT license not listed in the available licenses for instructables? It seems to be a very popular license for open source software development projects, I found a modified version which covers hardware as well.. Any specific reason why it's not available? What's the most popular license around here? Thanks and Regards, Stefan

Question by systdist    |  last reply


Arduino: Connecting Wifi Shield to Robot

Good morning, I bought the new Arduino Robot: http://arduino.cc/en/Main/Robot and wanted to connect the Wifi Shield to it: http://arduino.cc/en/Guide/ArduinoWiFiShield However, the pins 4,7 and 10 which are required are all occupied by the LCD.  Could you please supply me with instructions of how to connect the Wifi Shield to the robot, both hardware and software instructions. Please help me on this topic, I really need to get this working. Thank you in advance. Kind regards Stefan Marggraff

Topic by namboy29  


Arduino: How to connect Wifi Shield to Arduino Robot?

Good morning, I bought the new Arduino Robot: http://arduino.cc/en/Main/Robot and wanted to connect the Wifi Shield to it: http://arduino.cc/en/Guide/ArduinoWiFiShield However, the pins 4,7 and 10 which are required are all occupied by the LCD.  Could you please supply me with instructions of how to connect the Wifi Shield to the robot, both hardware and software instructions. Please help me on this topic, I really need to get this working. Thank you in advance. Kind regards Stefan Marggraff

Question by namboy29    |  last reply


I have an unknown Nerf gun... Answered

This used to be my brothers Nerf gun. He got it at Chuckie Cheese about 3 years ago. The gun is spiderman themed and it used to have a few spiderman stickers on it but they fell off. My brother asked me to fix it so I did and then surprisingly he just gave it to me. After it became mine I wanted to figure out what it was (if it had a name). It looks allot like the Nite Finder EX-3 but is about half the weight. Its actually not a Nerf gun, because the black circle thing says Fei Xiang. It didn't shoot regular nerf bullets or stefans (it came with its own special darts that we lost) so thats why I did the CPVC barrel mod.

Question by DBMods    |  last reply


Home-Trainer-Bike "no pain no gain" video system

Hi everybody, i want to build a home trainer which connects to my computer in that way, that video will only be played when i do some exercise. my idea: - attach bike dynamo to home trainer bike - make connection to old external computer keyboard - fiddle with the software so video is played when a button is "pressed" (or activated by exercise), if the button is not pressed, the video will pause. the last point seems to be really tricky - any ideas? any alternative ideas from anyone? i do not want some on/off switch because then you could simply do two strokes on the bike and sit back and relax to watch the movie. i want a solution where only when straddling the video will play. cheers, stefan

Topic by spot-x-berg    |  last reply


How to Re-route 9 Volt Batterie from Smoke Detector

Hello, We have 14 feet high ceilings and smoke detectors in 4 rooms at that height. Not wanting to crawl up the ladder to switch the 9 Volt batteries, one would think you could simplify this task. Use a 9 volt battery connector to connect to the battery ports in the smoke detectors, a wire each to a central point in the house, such as a hall closet, where each wire ends in a 9 volt battery box. I can find various 9 volt battery connectors to purchase, have umpteen yards of low voltage wire (from sprinkler system installation). What I don't know is, is there a limitation on the length of wire I can have a 9 volt battery on one end, and the smoke detector on the other end? Thank you. Stefan

Topic by StefanGH    |  last reply


Summer School of Making 2014

Hello Instructables community! Welcome at the Summer School of Making in Kortrijk, Belgium, at the end of this summer. More info on www.summerschoolofmaking.be A little glimpse of the speakers: - Clay modeling by Stefan Kiefer who worked for the biggest Cardesign Studios like Audi, MINI, Opel, Renault, KIA, SEAT and so on. - Wood turning by the Flemish Guild of Wood Turners - Cooking materials to design by Laurence Humier. Laurence lives in Italy, but she is a Belgian designer, her design projects are shown in MoMA NY) - Model storming by the Innovation company CREAX (designer Thomas Valcke) and Decathlon's Design Studio Oxylane. - Packaging techniques by MIUN - Mid Sweden University - they have a specialisation in packaging techniques - Design and print your own fonts from A to Z - Topocopy lab (Ghent) - Smart Textiles by TIO3 lab. and so on. Hope this is a teaser for you to consider a trip to Belgium! Becky becky.verthe@howest.be  

Topic by bverthe    |  last reply


K'nex plus bow

After seeing the topic On kl about a K'nex Nerf crossbow, I thought. Why are we so intent that ONLY repeaters can win K'nex wars? I go to nerf wars, and almost EVREY gun there is single shot. And you know what? the single shots win. and in K'nex the repeaters almost alway will break at some point in a war. So I made a K'nex primary. but made under Nerf primary terms. I give you, the knex + bow. Now, I am prepared for 200000 flames about this gun. you guys are going to say "it's just a killerk pistol" Or if you look closer "it's just a Dd27" well, I dont give a **** I like it and I think if I ever go to a K'nex war with k sayers being used I will win. Please don't flame.

Topic by benfoxg    |  last reply


Indianapolis 2015!!!

What's up K'nexers? It's Nerfrock', your local K'nexer-turned-temporary-lurker here to let you know that anyone interested is invited to a little party I'm having later this summer! Indianerfolis 2015 is basically the foam dart version of K'nex War 201#, and will include many military simulation and dart tagging games intended to provide lots of active fun! If you don't have any Nerf guns, K'nex guns are also welcome, as long as they don't have the ability to hurt someone. So far, Nerfrocketeer, JonnyBGood, a few NerfHaven members, a few of Nerfrock's friends, and possibly a few extra tagalongs will be there! More information can be found below: ---------------------------------------------------------------- Date: Saturday, June 27th, 2015 Time: 1:00 PM to around 4:00 PM. Location: Southeastway Regional Park, 5624 S Caroll Road. Park Info | Park Location ABOUT THE WAR:  This will be a general combat, capture-the-flag style war with two teams that will take place across a medium-sized field. We will play other games later in the day if everyone wishes. WHO'S INVITED: Anyone older than 14 years old who has a Nerf blaster that complies with the below rules and regulations is welcome to come. WHAT TO BRING: Nerf weapons, ammo, and equipment (complying with rules). Light/Tactical Clothing Lunch Anything you may need in an emergency. This may include special medication, money, a cell phone, and so on. Eye protection, closed-toed shoes, and a ride are mandatory. Friends! RULES: Modified Titans, Big Bad Bows, and other over-powered blasters that have the ability to cause serious injury are not allowed. Homemades and modded guns are welcome, as long as they follow these rules. Modified Nerf Ammo with sharp edges, points, or explosives, besides straight foam and hot glue stefans and slugs with washers, are absolutely not allowed. Blasters that look too realistic are not allowed. No mind-altering substances of any kind. Eye protection, closed-toed shoes, and a ride are mandatory. No homemade swords or shields. Five tags with a dart is out for the current round. Hit in the arms, blaster, or face doesn't count. Nerfrock' is a referee. Nerfrocketeer reserves the right to eject anyone from the war. No bad attitudes, vandalism, or other illegal/ socially unacceptable behavior. You can bring your dog, as long as it's friendly to strangers. No real weapons. You can trade/sell if you wish, but all responsibility for trading falls to you and the person you are trading or selling with. NOTE: This topic is in the K'nex section because this war is open to K'nex guns as well as Nerf guns, and a few K'nexers are going. -NK

Topic by nerfrocketeer