Tissue paper art is quite difficult for those who are new in this field. I made this forum to help new beginners. I hope you will help me in this good work. Share your good work to help others..Thanks in advance.
Topic by dashinggurl | last reply
Are there any good instructibles on glove boxes?
Question by Xenophile | last reply
I am covering a 1/25 scale Stinson SR 7 . I am doing this for the first time . The 4th attempt for this model . I want to do it right . The learning curve is littered with 3 previous failures using tissue . Thanx ..
Question by dimaxion | last reply
Hey, As someone who wants to try micropropagation I would like to know how long plant cells can live when cut from the main tissue that they're found? And if the liquid that they're suspended in and the nutrients really make the difference can I be advised as to what solution to make up for transport? Any help would be great, Thanks, Tom
Question by thomas9666 | last reply
I HAVE TO MAKE UP A THING FOR SCHOOL FOR BASICALLY A MINIATURE PAPER TOWEL DISPENSER. ITS GOING TO BE USED FOR TOILET TISSUE AND I HAVE NO IDEA ON WHAT TO DO. IVE DONE RESEARCH AND FOUND A MOTION SENSOR I COULD USE BUT THATS ABOUT IT. I DONT KNOW ANYTHING ON THIS SUBJECT SO IF ANYONE COULD POINT ME IN THE RIGHT DIRECTION THAT WOULD BE GREAT. I JUST BASICALLY NEED TO KNOW PARTS AND COST...
Topic by smurf1701 | last reply
I am doing an experiment that requires a cell culture, and for the question I am asking, an animal tissue culture is probably, better. If anyone knows how to make a tissue culture (preferably with brain cells but other cells work) then I need some help.
Question by ANDY! | last reply
This is a request for an instructable on how to build inexpensive, easy to pack, easy to use, high flying sky lanterns. I have a now 15 year old niece who has been sick most of her life and will be at the Mayo early this summer for an opperation that will either kill or cure her. She's going to be in rough shape for a couple days before and a couple weeks after the opperation. She loves the art of fireworks but I can't provide that for her in Rochester. I'd like to have a few evening lantern launches for her to lift her spirits and give her something to look forward to in the midst of her serious tribulations. I've bought two boxes from Skylighter. They are a great company. I've always had positive experiences in my business with them. Unfortunately they have been out of the white Sky Lanterns, and their Lanterns are a bit smaller than I would like. I've seen tube shaped lanterns on youtube but I've not seen directions on how to make them. I'd like to make biodegradable/safe lanterns. Please Help Glad to be a new member here.
Question by woof_tex | last reply
Recently, I found a kit to transform E. coli with GFP (green fluorescent protein) plasmids, causing the bacteria to fluoresce under UV light. I later found a kit for maintaining an African violet tissue culture, sparking the question if it would be possible to use the plasmids intended for use in E. coli in the African violet tissue, causing the violet tissue to fluoresce, which can then be transplanted to grow into a full glowing violet plant. Would the plasmids be usable in transforming the violet tissue, or would they be specialized to just the E. coli?
Question by ALogan97 | last reply
I have a pair of white tissue tennis that I want to dress up. I chose an image from a book. I'm also planning to shred the image so it can fit. The only problem is: How do I transfer the image into the tennis tissue? I heard of a tissue decoupage, but I don't mind transfering the image by hand (with ink, pens and that stuff) but it must be water-proof. Check out the images so you can understand what I'm planning to do :) Thank you all for you answers.
Question by soyblondy | last reply
This is a forum where you can poste any kind of picture you want, but only text pictures! The reason I created this forum is because I really think these text pictures are interesting. Anything is ok, nothing is bad, and throw everything you got at this forum. Thanks! :)
Topic by J Moneyman | last reply
Here is the ingrediants list: mechanically separated chicken,pork skin,partially defatted beef fatty tissue(???),partially defatted pork fatty tissue,vinigar,salt,spices,sugar,flavorings(more specific please??),sodium erythorbate,sodium nitrate eew! they sell this as f00d!? why is this stuff legal? the number on the can is18007275777 it says to call 10 am to seven pm monday through friday eeww
Topic by Zaphod Beeblebrox | last reply
So heres my problem ( wishing again somebody will come whit a solution )Im tryying to ignite a little cotton tissu sqaure , which have lighter fuel on it, whit a NiChrome wire....All what i got its some smoke but no flames .... (the smoke stops when i turn off the NiChrome wire)So do someone have a idea to light up a cotton tissu pad (whit lighter fuel on it) whitout using the flink tingythx MaximePS 1 : this is what i wanna do (ecxept not in a wallet)http://youtube.com/watch?v=2njiK1dsWQM
Topic by koax | last reply
I recently saw videos on hydroponics and wanted to set it up my self on a budget, 0$, just as an experiment i cut the cone top of a small mineral water bottle put it upside down like a diy minnow trap and used tissue as substitute for rock wool, filled bottom with water till it just touched the tissue, then plopped a bean in it. I then forgot after putting it behind a fish tank. After 3 days it looks like this. I need nutrient in water so i was thinking about just dumping a palm full of soil, would it work?
Question by Atharva1 | last reply
Has anyone else heard that when a laser is passed through a citrine crystal onto bodily scars, it will remove scar tissue? Also, any news on research using a protein found in hepatitis ( c, d, or g,?) to cure aids?? I heard both of these on the radio. Thanks. kathleen
Question by kathleencleans | last reply
Well this is just too interesting not to post. Turns out after going to the dentist for a routine cleaning, that I have a spot in the right side of my jaw he wanted looked at. After going to a dental surgeon he concluded that it is a type of cyst in the bone of the jaw that forms when a wisdom tooth doesn't come in but instead forms a growth of tissue in that cavity. So thinking this was what was going on he went ahead with the normal procedure. To numb me up till I'm almost knocked out, cut the gum line cut the jaw bone to the area and then grind (yes grind with a drill...) the cavity out. After the cyst was removed they would then continue to grind the walls of the cavity to fill in the "hole". From there it would fill in and regrow the bone tissue and heal everything back up with time. But of course that wasn't the case with me. While he was working everything was fine until he came to a hollow area. Hollow. No cyst, no tissue, nothing but a string of a nerve running right through the robin egg sized pocket of air in the middle. He was very confused but after looking at it proceeded to just grind the edges to fill it in and took some for studying. In his 30+ years of doing this he has never heard of or seen anything like it. But he says there's not really anything wrong and that it should be fine. Still....now where's that gauze I had...
Topic by Rockerx | last reply
My boys are watching Mythbusters behind me, and one line just caught my attention:...at a disused Naval base in Alameda..."They were using a towed rig to find out if a tissue box on the back shelf of a car would kill the driver in a crash, except they managed to rip an eighteen inch chunk out of the rig instead.Have Squid Labs been hosting Mythbusters?
Topic by Kiteman | last reply
Im buildng a mould for casing pcl (polymorf) there are issuse with using petroleum jelly as a release agent due to it clogging the pores, im building a highly porus biological scaffold for tissue engineering
Question by randomhand | last reply
What stops a cell from being extremly large? inparticular in prokaryotic cells, like algae, where it is the cell and is not part of something bigger like a tissue or organ. also in the way of darwins theroy of evolution, does any one know how much it appiles to algae, either all or some strains and how much they addapt and how quickly?
Topic by thelastonekills | last reply
Ok, im in puberty full swing. That means acne and pimples. I need a free solution to clear my acne and pimples. However, I dont want scar tissue left behind from popping the pimples. Do you have any solutions for this problem? Maybe some adults could help....... just leave your comments BTW, check out my avatar:
Topic by DJ Radio | last reply
Hello , I want to invent one product which is simple for my education . I am manufacturing engineer . And with some simple material , we should invent products . But , i can't imagine now that what should I can invent with these materials . Please , Help me that what can I invent with these materials ?? Materials are ; 10 Pipet 1 Adhesive tape 1 Toilet tissue 5 Rubber band 20 Paper clip 1 Paper Glass 1 egg .
Topic by honourbjk | last reply
Let's get this out of the way: 3D printing is amazing. Prototyping and even generating human tissue are happening. Right. Now. That said, let's find some everyday uses for this crazy technology. How are you using it to fix stuff around your house? Doorstops, replacement parts, hacks, key hooks... all that stuff. Dont' have access to a 3D printer? Post your idea here and maybe we'll help you get it made... ;)
Topic by andrewt | last reply
Let's get this out of the way: 3D printing is amazing. Prototyping and even generating human tissue are happening. Right. Now. That said, let's find some everyday uses for this crazy technology. How are you using it to fix stuff around your house? Doorstops, replacement parts, hacks, key hooks... all that stuff. Don't have access to a 3D printer? Post your idea here and maybe we'll help you get it made... ;)
Topic by andrewt | last reply
I have a project for school where i have to create a motion sensor toilet tissue dispenser kind of like a tiny paper towel dispenser i could put on a counter. I dont know anything about how motion sensors work or how i would make it work. I just need to figure out the price it would be to set up the motion sensors, gears and everything. Any help, such as links to parts or anything that would give me a better understanding of how to set up motion sensors and connecting them to gears and such, would be appreciated.
Topic by smurf1701 | last reply
Http://home.howstuffworks.com/refrigerator6.htm Using the Peltier effect via an aluminum plate, would it be possible to create a homemade cryolipolysis machine? The method cryolipolysis uses to kill fat cells is this: The vacuum pulls the adipose tissue away from the body's core along with the surrounding skin folds to prevent the tissue from being warmed by body temperature. The temperature of the fat cells drops to between -1 degree Celsius and -10 degrees Celsius, triggering pre-programmed cell death. After one hour of application all of the susceptible cells in the area have been triggered and will die off between two weeks and 3 months later. I don't want to use something as inaccurate as ice packs, I would like to buy an aluminum plate, attach wiring to one side to utilize the Peltier effect, apply a light vacuum to keep contact, and insert some kind of temperature control per Peltier junction to keep the temperature in the optimum zone. As far as the back of the connections that gets hot, cooling that with circulated anti-freeze or water should be sufficient, but I'm not sure of the best configuration on the plate/vacuum setup. The way the current Zeltiq technology pulls the skin so far away from the body leads me to believe it's not great for any area that doesn't have a lot of excess skin to pull on and I would like to create a shallower cavity that can fit in harder to reach places like the side of the chest under the arm.
Question by DIY_Novice | last reply
Researchers at Purdue have impregnated paper with iron particles, creating "ferropaper." ------------------------------------------ Researchers at Purdue University have created a magnetic "ferropaper" that might be used to make low-cost "micromotors" for surgical instruments, tiny tweezers to study cells and miniature speakers. The material is made by impregnating ordinary paper -- even newsprint -- with a mixture of mineral oil and "magnetic nanoparticles" of iron oxide. The nanoparticle-laden paper can then be moved using a magnetic field. ------------------------------------------ The article later mentions that "newspaper and soft tissue paper are especially suitable." This sounds to me like a startlingly simple DIY project that could create some fun kinetic sculpture, if nothing else. Via ScienceDaily
Topic by CameronSS | last reply
I want to clean out the inside glass of a CFL bulb to make a bubblier. Using a small tube to pump air & water threw the glass bulb.I've tried waiting a day, soaking in soapy water, I tried using a pipe cleaner, (broke the glass), I tried pulling a string with tissue paper, (broke again). Is there a chemical I can use to brake up the paint in the bulb, so I can clean it out with running water later. At the moment I'm trying soaking in peroxide or rubbing alcohol. If that doson't work I'm going for acetone next. After that I'm out of ideas.
Question by elkaddalek | last reply
Hi everyone.I need a one side adhesive, velcro-receptive tape.That is, an adhesive tape that is sticky on one side and on the other it has a felt-like tissue.English is not my first language and I am not sure about what to search for on eBay or Aliexpress to buy.I need this for my project but all the tapes I could find have both sides (both hook and loop) and they are much costlier than what I'd expect just for a felt-like one-side adhesive tapes.Can you help me please?Thank you,Atkers
Question by atkers | last reply
I'm making the Book of the Vishanti from Doctor Strange out of an old textbook, but since it was so clean and well-preserved (as well as the wrong color) I decoupaged some crumpled tissue paper to the cover and painted it with some acrylic paint. Now my problem is that the cover looks a little too much like it was painted, and is really just one flat color. Are there any techniques I can use to make it look more worn and ancient? Note: in person, the cover looks a lot more drab and consistent in its color.
Question by Numbuh1Nerd | last reply
Long story short, i recently came in to a pile of clean rags that mechanics use to wipe oil from their hands and tools. I posted a link below to reference this item if anyone is not familiar. I dont have any use for these rags but the simple cloth squares have been surged and would do well as a handkerchief (Cloth tissue or napkin) is they weren't so rough. I want to open up the topic to everyone and see if anyone has ideas for alternative uses.. i made a small pouch from one already but other then that i haven't got any more ideas. Sorry, not trying to promote this store but these are the rags i have now. http://ragdepot.net/1000-red-shop-.html
Topic by Exhumer | last reply
I am building a Sig Tiger rubber band-powered model. I know it's wimpy, but I don't have a budget for anything larger, or a place to fly it. My question is if anyone has experience with model airplane covering. Specifically, I read an article in an old RC Modeler magazine that said plastic wrap, attached with a glue stick, made excellent covering for light models, but that Monokote and Ultrakote will crush light balsa models when it shrinks. Has anyone ever tried this? I'm supposed to use tissue, according to the plans, but ew.Also, I have an ancient U-Control Waco SRE biplane that my uncle built when he was deployed to Korea. It has an old O.S. Max III 35 that has no hope of running again, but I want to at least recover it. Any suggestions for removing old covering? It seems to be Monokote-type stuff.
Topic by CameronSS | last reply
I'm looking to cast a fake monster tongue out of Alumisol Soft Plastic (Plastisol) for a costume. Obviously it will end up going in my mouth. I can't find any information anywhere about the food-safety of the solid compound. What I gather from the msds sheet is that it's non-toxic, but it's a little ambiguous. The retailer I asked couldn't find any information either. From what I can tell it's usually used to create soft rubber fishing lures, so I'd assume it's environmentally friendly with respect to not releasing toxins into the water, and its listed uses include special effects as well as medical reproductions (Of tissue). Has anyone used this type of plastisol in contact with food or the surface of your mouth before? All help is appreciated.
Topic by SixFootBlue | last reply
I've just had two leather wristbands laser engraved with a custom graphic. Unfortunately, though the engraving is clear and crisp, the dark color of the engraving and the leather makes the graphic hard to see. It is only visible in bright, hard light. How would I go about making the engraved graphic more visible? I thought about perhaps filling in the engraving with a light-colored paint, but how would I go about doing that? With wood, I would just slop on acrylic paint and then wipe the excess off with a tissue, leaving the paint in the crevasses. But would that also work with leather? Would the paint wipe off properly? I'm too scared to do anything to the wristbands yet since I've spent a lot of time, effort and money getting them custom engraved. Any advice would be very helpful please! :D
Topic by TheFirewalker | last reply
You suffer for days after one of these tiny vampires got you?The itching drives you mad?And unlike some people your bites always get worse from day two onwards?If so, then you might have the same problem as I have...No matter how much hate and disgust you show, these mozzies just love you.And as this wouldn't be bad enough your body totally overreacts every time.A bite for me meant numbing cremes or sprays, anti-histamines and if doubt putting a heavy duty bandaid over it so if I forget the scratching won't do too much harm.Despite all this 5 to 6 days until the itch, swelling and irritation stop...A few weeks ago while fishing I had a nice chat with a man way into his 80's already.He laughed when I started to spray all uncovered parts of my body with tropical strenght insect repellent.Told him my reasons and then he said I should try something he used during his army times for bites of unknown critters.In the jungle they often relied on local guides and they provided a solution that seems to be totally forgotten these day - even I did not know it LOLTheory behind it...If you know these "insect bite clicker" then you already know how it is put into comercial use - without ringing much relief.Whenever something bad enters the body there is a reaction to fight it off or dispose of it.Problem with insect bites, be it mozzies or sand flies, is that all this bad stuff is concentrated in a very tiny area.And being mostly skin tissue makes it hard to deal with it.By applying pressure and massage like motion to the bite the contaminent are spread through the tissue.If you leave a small dint with little to no color left after 2 or so minutes you doing it good.Try to use something hard here, like a spoon, bottle cap, end of a screwdriver - whatever is slightly rounded and solid.You will notice that the itch gets quite bad once the bloodflow starts again and within minutes the bite area will swell up and form a more or less evenly formed hump.The hump will be pale in color while around it the skin is slightly red from the added bloodflow.Don't scratch! Just wait until a nice hump has formed where you can clearly make out the rim.Now use the same pressure method as before and spread out the hump while constaly pushing it in and "wobbling" around to massage the area a bit.Do this as before for about 2 minutes and if you still see a destinct difference between bite aea and surrounding tissue continue for a bit longer.Should not take more than 5 minutes to have the area nice and even again.Wait again and check for new singns of swelling up - there should not be any.If there is simply repeat one last time.The remaining itch will go away within about an hour instead of days and there won't be any severe after effects from day 2 onwards either anymore.It can help to use heat as well.For example by heating up the spoon in some hot water before using it.But keep the heat at a level you can tolerate!!! Do not heat the spoon to the point where you feel pain from the heat.Try it out and report back! :)
Topic by Downunder35m | last reply
I want to measure a very tiny gap of about 20-30 microns(0.02-0.03 mm) using a sensor with the help of arduino and then display it using a 16x2 Digital LCD Display. Can someone help me out with the sensor that I will need for this purpose with exact name and its working.The gap that I want to measure is the gap between the the joints of a healing fractured bone.(the joint where the tissues develop to join the broken parts together.)Since this is a leg bone any person walking with such a fractured bone will put pressure on the bone and the gap present in the bone will reduce. So that is what I want to measure using a sensor and arduino. Since this gap will be too small (20-30 microns) I am unable to find a suitable sensor for the same.PS: Main issue I am facing is the measurement of gap using a sensor and arduino since I can find a suitable sensor for the same.Please find the attachments of the bone and the gap I want to measure.Also the thing I am doing is a close case of greenstick fracture. refer to the attachment of greenstick fracture.
Topic by ChinmayV2
Alright, fellow Instructablers, I need help. I'm not usually a forum-poster; I like lurking. But I'm getting a little desperate. About a month ago, I was in a bit of a car accident. The airbags went off as I was trying to turn away from the telephone pole, and so my right wrist was in front of the steering wheel when the bags went off. This means that my right wrist (yes, I'm right handed) is still recovering, with the current diagnosis of "soft tissue injury with a sprain on top." I'm going to see a hand specialist, but in the mean time, it's quite the wrist brace. Though I can use my fingers, I can't do much without pain/stiffness/etc. So here's the problem that I'm posing to you: what can I make? I'm going stir-crazy. I knit, I woodwork, I play with wire and jewelry making, I draw, I take things apart... I'm willing to learn any new medium and play with any new toys. But I can't use my wrist. So, what adaptive techniques or simple projects or mediums do you suggest until I'm back to full powers? TL;DR: Can't use my wrist, but want to keep making things. Ideas?
Topic by lastchancetuesday | last reply
This question could go under both "Health" and "Pets" but I chose this one as the most relevant. I drink alot of different types of tea (black, green, red, white, herbal, you name it) so I have alot of supply around. And recently my poor little kitty was diagnosed with a cancerous soft tissue sarcoma in his hind leg. One of the many things our Veterinary Oncologist has suggested to us is supplements of green tea extract daily (as it has shown positive influence in human studies of survival rate with different types of cancer). It wouldn't hurt to give it a try. So the more detailed question here is, how can I make my own concentrated liquid green tea extract without over steeping the tea and breaking down the molecules of the beneficial antioxidants? And as far as dosage goes I have a general idea of how much extract to give (about 30 mg per day) if it's pure (like in a drugstore capsule). Any thoughts or ideas would be appreciated.
Question by Asura-Valkyrie | last reply
There are weird laws, and then there are Norwegian laws!The government of Norway's Svalbard Islands have made it illegal to die there. If you are close to death - through age or illness - they ship you off to the mainland.If you die quickly, through accident or sudden illness, they refuse to bury you.The town's small graveyard stopped accepting newcomers 70 years ago, after it was discovered that the bodies were failing to decompose.But although there is no old people's home, there is a kindergarten.In winter - when the darkness lasts for months on end - the children make images of the sun with yellow paint and tissue paper and stick them to the windows. Trips outside the kindergarten's walls carry a more immediate danger for the children and, for this reason, the teacher carries a gun.Longyearbyen is in the land of the polar bear, an animal which causes real dread among its residents.Every student at the university spends their first day learning how to shoot bears. Aim toward the chest, runs the advice, rather than the head which is easy to miss.If you are unarmed when you encounter a bear, toss your mittens on the snow in the hope of distracting it.Full BBC StorySvalbard Tourist Information.EDITI just found out - this is where my Dad is going on holiday in a few days, specifically to go see the polar bears.Check out the webcams on the Svalbard Tourist Information site - Ee, it's grim up North! (UK-specific joke)
Topic by Kiteman | last reply
Dutch artist Wieke Somers has created a series of sculptures that are made with human ashes. She uses a 3D printer to assemble them, although there's no detail about the construction process in this article. Much more attention is given to the reasoning why in a classic artist statement: dutch design studio wieke somers does not want to discard the many benefits of technological innovation and its inherent mentality and the joy and will to create. instead she wants to make a statement about the current state of affairs in design and our conviction that we need a new view on what is necessary in the 21st century. her project 'consumer or conserve' evaluates this notion of a second-life. she considers, how human ashes can be reused by means of rapid prototyping or 3D printing, so that we may afford someone a 'second life' as a rocking chair, vacuum cleaner, perhaps even a toaster? would we become more attached to these objects if this was the case? would our willingness to pay more for a product increase if it is made from human tissue or ashes? I'd guess the answer is "no." Little bit creepy. Then again, Ed Headrick from Frisbee had his remains mixed in with a bunch of discs after he passed on so who knows? wieki somers: consume or conserve via inhabitat
Topic by fungus amungus | last reply
After a conversation with ll.13, I have come to the shocking realization that many people don't know about the deadly poison that is pumped into our water supply. It's called DiHydrogen Monoxide, and it is very dangerous. Look at some of the dangers associated with DHMO.Death due to accidental inhalation of DHMO, even in small quantities.Prolonged exposure to solid DHMO causes severe tissue damage.Excessive ingestion produces a number of unpleasant though not typically life-threatening side-effects.DHMO is a major component of acid rain.Gaseous DHMO can cause severe burns.Contributes to soil erosion.Leads to corrosion and oxidation of many metals.Contamination of electrical systems often causes short-circuits.Exposure decreases effectiveness of automobile brakes.Found in biopsies of pre-cancerous tumors and lesions.Given to vicious dogs involved in recent deadly attacks.Often associated with killer cyclones in the U.S. Midwest and elsewhere, and in hurricanes including deadly storms in Florida, New Orleans and other areas of the southeastern U.S.Thermal variations in DHMO are a suspected contributor to the El Nino weather effect.The scariest part is that most people don't even know what it is! One poor sap actually ingested it, AND instructed others to do so in his instructable here.You can find out more about this deadly compound at DHMO.org.Be aware and stay alive!
Topic by Gjdj3 | last reply
Hi everyone! I am a huge 3d printing enthusiast from Poland (Europe). I run personalfactory.tumblr.com - news aggregator/blog concerning 3d printing, fablabs, open-source hardware and related. If you have some spare time please fill in my 3D Printing Open Survey - If you could make almost anything, what would it be ? Updated results are publicly available after completing questionnaire (Please press "WyÅÂlij" - Send button and "Wyniki ankiety" - Results button at the end). This survey will be used to evaluate demand for 3d printing services globally. It consist of 30 questions about: - open-source 3d printers - future of additive manufacturing - 3d printing services - ecology in 3d printing - copyright issues and 3d printing Three example questions: 2. Which of the following 3d printing applications is the most interesting? * - Things personalization - Printing food - Attempts to print structures resembles in functioning living tissues or blood vessels - Creating impossible or difficult to create by using conventional technology things - Printing rooms or buildings on earth/moon - Printing chemical compounds (for example drugs) - Using in renewable energy sources - Printing parts and/or mechanical vehicles 3 . Have you ever heard about cheap DIY 3D Printers (for example RepRap, PrintrBot, MakiBox A6) ? * DIY - Do It Yourself - Yes - No 4 . When 3D Printers will become one of the typical household appliances ? * - After 5 years - After 10 years - After 15 years - After 20 years or later - Never - I don't know Feel free to ask questions! :)
Topic by dziarski
After the success of the last contest, Gmjhowe, =SMART= and myself decided we'd go for it and launch a second contest.The first we really enjoyed and saw some awesome entries. This time we've decided to make the guidelines a wee bit looser so you can use your imagination more. We'll be setting a category for you to design and build within and then provide you with some example ideas to get you started. And this category is....FLIGHTAnything plane, helicopter, glider, flight related is allowed. Please read the rules carefully.Rules:Your entry must do something. It can't just be a model of a plane or a helicopter. We want them to move or glide or have spinning parts or be functional for something else around the house but be aircraft themed.Entries must be over 50% knex. The remaining can be paper, glue, card, tissue paper.... anything!To enter, write up a full instructable of your construction process with clear pictures and descriptions. Post the link here.Please steer clear of guns. That's not what this is about.Starting and closing dates are GMT.What the judges say goes!Have fun!Judging - 12th Sept - 18th SeptSuggestions:A propellor. Small and compact, if you design a good one you might get extra kudos if your design's then used in loads of other entries.A ceiling plane. With a plastic propeller on the front and the top attached to a string to the ceiling, this plane will fly itself around in circles on a string.Paper plane launcher. Probably the closest you'll get to a gun.A vertical launch rocket. Rocket being a rocket model not a meagre collection of rods.While knex by itself might not be light enough to fly.... perhaps you could run some string through the middle to make it appear to glide.... Mum's washing line might be of great help.Prizes:There will be patches for prizes. Gmjhowe will be uploading them soon.
Topic by Jayefuu | last reply
Each year, Dihydrogen Monoxide is a known causative component in many thousands of deaths and is a major contributor to millions upon millions of dollars in damage to property and the environment. Some of the known perils of Dihydrogen Monoxide are:Death due to accidental inhalation of DHMO, even in small quantities.Prolonged exposure to solid DHMO causes severe tissue damage.Excessive ingestion produces a number of unpleasant though not typically life-threatening side-effects.DHMO is a major component of acid rain.Gaseous DHMO can cause severe burns.Contributes to soil erosion.Leads to corrosion and oxidation of many metals.Contamination of electrical systems often causes short-circuits.Exposure decreases effectiveness of automobile brakes.Found in biopsies of pre-cancerous tumors and lesions.Given to vicious dogs involved in recent deadly attacks.Often associated with killer cyclones in the U.S. Midwest and elsewhere, and in hurricanes including deadly storms in Florida, New Orleans and other areas of the southeastern U.S.Thermal variations in DHMO are a suspected contributor to the El Nino weather effect.Those are from an American study. I personally have seen quite a horrible crash after liquid DHMO was sprayed across a road, and DHMO was found in the analysis of the first stones removed from #2 son's kidneys.Proper statistics are hard to dig up, but I have found that DHMO was a direct cause of death in 3842 cases in the USA in 2002. 8.5% of them were children under the age of one.Numbers are harder to find in the UK, but around 500 deaths occur every year following contact with DHMO.(A drop of 4% in DHMO deaths in 2001 was attributed to fewer people visiting rural areas thanks to the foot-and-mouth outbreak, indicating a prevalence of DHMO contamination in England's green spaces.)Rather than scaremongering, you should be warning your friends about a very real hazard in their everyday lives.
Topic by Kiteman | last reply
In what dishes can you tell the difference between pre-peeled and fresh garlic. How about Chinese versus Californian pre-peeled garlic?If you can tell the difference, how can you be sure? I love garlic, and use a lot of it. I'll toss a handful of chopped cloves into almost any savory dish that involves a sauteing step. Using so much and being pressed for time, I primarily buy Californian pre-peeled garlic, and chop it right before I use it. I'm curious if you judge pre-peeled garlic to be less flavorful, and if so, can that flavor be returned by an increase in total garlic or if there are fleeting compounds that escape as soon as the garlic is peeled.Another thing I've noticed is that I need to be careful when I make dishes where I food-process the garlic to mince it. I've ruined a curry or two by using food-processed fresh turmeric, fresh peppers, and pre-peeled garlic that smelled fine but had probably spent a week in the fridge. In the finished dish, the garlic contributed a pretty nasty "raw vegetal" taste. Similarly, Christy once food-processed and sauteed some onions and older pre-peeled garlic only to have the whole mixture turn blue and taste horrible. http://whatscookingamerica.net/Q-A/bluegarlic.htmThe discoloration is due to pigments that form between sulfur compounds in garlic and amino acids. When the garlic tissue is disrupted, as happens in processing, an enzyme is liberated and reacts with it to form thiosulfinates compounds that then react with the natural amino acids in the garlic to form blue pigments. The age of garlic determines how much isoalliin there is in the first place, and the nature of the processing determines how much enzyme is liberated.The blue color apparently shouldn't harm the taste, so it would be neat to develop a dish that naturally turned blue using this reaction while still tasting great.
Topic by ewilhelm | last reply
Get started on your haunted houses with some help from these Halloween Decorations. If ideas of how to turn your humble abode into a monstrous lair aren't running through your brain, then it's time to start! There are kids to be scared! Fun to be had! Get to it!Make something awesome, document it, and be sure to enter it into our DIY Halloween Contest!Also see: Halloween Pumpkin Carving Halloween Costumes Halloween for Kids Halloween Makeup Halloween Party Halloween Masks Pirate Cannon - A working replica of a naval cannon that fires pneumatically by Part Time Chef.com Complete your pirate look with a cannon that makes noise and fires tissue to impress kids and neighbors. How to build a Five Foot Tall Jacob's ladder by ewilhelm Every mad scientist needs one of these. Without one an evil underground lair is more like a den in need of a good cleaning. Laser Vortex by mever Smoke and lasers always work well together.Keep the laser moving to create a cool and distorted effect. Make a cool hologram illusion! by NK5 Make a skull hover in mid-air! Halloween decor werewolf head by missmonster Need to convince anyone that last year's Halloween was more intense? Just put this trophy on the wall. Solid-state Halloween controller and how to build a Haunted House by ewilhelm For the more advanced spooksters you should look to this guide for makign Halloween a little more high tech. Rotoff the Deadnose Reindeer by PaHalloweenFreak At first glance it looks like Santa came early. Look closer and you'll see that he's still stuck, and rotting, on his mission from last year. How to convert an old swingset into a guillotine prop for Halloween by Strapped-4-Cache The little ones have ditched the swingset and so it's time to put it to a nobler, and nastier, cause. Build a pneumatically actuated Yeti in a cage for a Halloween Haunted house by ewilhelm This li'l yeti is stuck in a cage and none too happy about it! At the push of a button he'll leap at any Trick or Treater who comes by. How to Build a Spooky Working Drawbridge with Sounds and Light by rjtodd13 Set the mood early with a killer entrance. Or maybe just use this for your own cult when you get around to starting it. Either way.
Topic by fungus amungus | last reply
[edit: this isn't real, but it would be awesome] In the interest of helping out our amazing community of authors, we’ve decided to make all of Instructables available for download in a single PDF document. That way when the EMPs hit or the grid goes down, you’ll have all the chicken rearing, solar paneling, rain barreling, wind turbining, and urban farming resources you’ll need. And because we’re including everything, you’ll also be able to stave off the post-apocalypse blues with bacon roses and unicorn poop. We’re putting all 127,000 Instructables projects into a single omnibus edition that will be sold at cost (TBD) to Instructables authors and for about $1000 for non-members. We’ll also make the PDF available to Pro members. If you’re so inclined, you can print and bind your own version. Get familiar with KaptinScarlet’s “How to Bind Your Own Hardcover Book” Instructable. We found a spectacular publisher who’s willing to bind the pages with paracord and baling wire. This edition should have just about 30 meters of paracord in the binding, along with just enough baling wire to keep the whole thing together if you choose to take out the paracord. The publisher also agreed to include a metal shank in the spine that can be fashioned into a makeshift knife, shovel, or bottle opener. The book is big enough to make a pretty nice counterweight for a small trebuchet, too. There were a few challenges for this publication. First of all, there’s an awful lot of content. To keep the print length down, we used small images wherever possible. We also cut the comment sections and individual project tables of contents. We did, however, keep the advertisements in the margins just in case AdSense will pay out during the End of Days. This publisher did balk at including packages of strike-anywhere matches in the book jacket. Sorry everybody. Matches were deemed “too unsafe” for their production and distribution teams. As though a conflagration of Amazon packages in the back of a UPS truck is less safe than losing a few digits to a frozen post-apocalyptic hellscape. The biggest challenge of all, though, was the sheer size of the book itself. The rough draft weighed in at about 500 kilograms. In a lucky break, using that ultra-thin biblical/lexicographer paper stock allowed us to cut the weight to just 220kg AND to make the pages double as bathroom tissue in a Charmin-less world. The tome will require a licensed forklift operator to receive it (or you can choose to pay the $150 white glove installation surcharge.) And, as usual, we cannot ship to a PO box.
Topic by wilgubeast | last reply