Search for trying in Topics

Try this

How long can you make it?My record is 23.38 seconds.

Topic by drinkmorecoffee    |  last reply

try this

Lego gunyou guys might like this, its a gun made out of lego and shots rubber bands. its pretty cool

Topic by evil_lemon    |  last reply

Just Keep on Trying

You have to admire the dog's persistence in trying to get up the slide. I love how he tries to take a shortcut in the end. via Neatorama

Topic by fungus amungus    |  last reply

Trying to locate

I am looking for a Center zeroed meter (just the analog gauge, not a complete meter), or at least an idea on what I might find that my dumpster diving become more precise :-) like the one contained herein:

Topic by Goodhart    |  last reply

wireless webcam, im trying to make in into a none wireless

Ok so my couzin was gona throw away this camera, but i decided to ask him for it, i guess it was supposed to be a baby cam or something because it says something about a baby [most of the words are chipped off] but its wire less ive been looking to see if theres any way to conect it to a usb and make it a web cam but i havent had any luk i bought a cheap usb from target and one of those "usb fans" i striped the wires and opened the camera but every time i conect them they dont seem to work... any help? thanx =] sorry i have no pictures at the time but i will try to get some by monday or tuesday

Topic by z3ro_infinite    |  last reply

i am trying to save up for a horse, but am not old enough to get a REAL job but am trying to make a lot of money, ideas?

I am a teenage girl, i am trying to earn more money to get my horse:)  i hove horses and have been saving ever since i was 9... but i still would like to have a few hundred $ in savings before i get my horse, any ideas howto earn money? i love working outside or inside it doesent matter. i am a hard worker and dont care if my hands get a little dirty.. Please help!

Question by horselover2000    |  last reply

What Shall I Build? Hmm?

Hai. It's the old tosser from Holland again! I am feeling nostalgic, so I might perhaps build a K'nex gun quite soon. I'm not making any promises so don't expect me to push out like 3 guns a month anytime soon. College is very demanding, but K'nex is just too awesome to let go of. And since I FINALLY got a new camera, it's a very fortunate timing of events.  Hopefully see you all soon, with a new Instructable! -Viccie.B1993-

Topic by Skreetsha    |  last reply

Try me Button

I got a few of those Try Me buttons off some Halloween things I bought, are they a complete waste or is there something you can do with them?

Topic by thatjawn    |  last reply

Trying to join the community

Cannot successfully upload a jpg file so I can't participate in the community! I keep getting error messages from instructables. Any ideas what is going on folks?

Topic by Kspraydad  

Want to Try Pro?

Is there anyone out there who isn't a pro but wants to be a pro member?  I have two 3 month pro memberships gift codes available to two people who have made instructables but have not yet gone pro.  So the first two to reply will receive them. Happy Summer! Zurichko

Topic by zurichko    |  last reply

Trying to make flute

I'm Trying to make aluminum pipe flute with calculator. Both giving me NaN. Thisis great I think this method is only for major scale. Mouth hole placement gives key of flute. I think I can make same measuring from other mouth hole placements. I don't know how to measure mouth hole placement for desired keys. I'm not sure how important is pipe length. I know that longer pipe length makes flute sound lower.

Topic by DeathSuperMario    |  last reply

Trying to identify this item?

Obviously I am new here if I posted in the wrong place please tell me where to post.    Is this a Farm implement, tool, heater. It is about 25" tall, with a 10" diameter. There is a closed bottom why it is raised off the ground i don't know. Rust area is from prior heat damage to the galvanized metal. It is too early to be a charcoal brick starter. I know it is not a chicken feeder. All answers will be appreciated.

Question by nero23    |  last reply

How do i shoot a 3 pointer in basketball?

I dont know how to do it i just keep trying and keep missing by a mile

Question by patriotsman  

Need help with chemistry? Try this.

Try memorizing it.Also this one. Kiteman suggested this one.

Topic by NYPA    |  last reply

Trying to Remake a Platinum Record

I'm trying to make a Platinum Record for my friend for Christmas, and I'm trying to do it so that it looks like she really got one. So I need to figure out how to make the vinyl I bought look like a Platinum Record.... Any suggestions? 

Topic by sfcard    |  last reply

"updating" when trying to edit

Hi, When I try to edit my instructable the page loads but the screen stays grey and it says 'updating'. If left it continues to stay this way. Does anyone know how to fix this? Thanks! Hi, I have worked it out! For anyone wondering: I was using Firefox and it worked when I tried it on Internet Explorer. Thanks for all your help!

Topic by hlkhfoef    |  last reply

trying to convert my bicycle?

I found this bike in the dumpster its a X-games bmx with 20 inch wheels, looks like a dirtbike, i can't find these anywhere anymore it runs alright after i fixed it up, but i wan't to give it some more juice, i was wondering if anyone had any tips as to where i could find the battery type compact  enough to mount, and a converter as well, thank you?

Question by Necron22    |  last reply

How can I open .mod files in linux (ubuntu)?

I am trying to open a .mod file in ubuntu. Every program that I have tried has failed right away. I have tried, vlc, real player 11, and everything that comes installed in ubuntu. Please help me get this file open. Thanks

Question by TOCO    |  last reply


 Why is the home page always changing format?  It looks more ridiculous every time! I remember when I first joined how their was two collums of different instructables.  This format was easy to sort though and you didn't have to look through all the stuff you DIDNT want to see and you could click on the vast variety of things you DID want to see.  Today when I logged on there is only one column of things and I cant even sort out what is recent and what is featured.  Please change the format back instructables robot. It is a lot simpler and looks more professional. EB

Topic by ERCBIENG    |  last reply

im trying to update my profile and when i click update profile it doesent save ???

Im trying to update my profile and when i click update profile it doesent save ???

Topic by goeon    |  last reply

when I turn it on or try to press

Thereafter, when I turn it on or try to press the ClockworkMod Recovery bootkey combination (Vol Down, then power, wait, then release power when logos come one) it says on the permenant startup screen (schreenshot below).

Topic by fhfqhdmv    |  last reply

App Crashing When Trying to Publish

Everytime i try and publish an instructable it says its loading then a couple seconds later the app crashes and sends me to my home screen. Ive tried everything to try and stop this. Ive closed apps, deleted music and apps and pictures to get more storage, restarted my phone and nothing seems to work. Can anyone Please help me?

Topic by Fruitloopzy    |  last reply

Trying to add to a contest but it's not listed

Hi, I'm trying to add my instructable ( to the Microcontroller contest but when I click to add it, that particular contest isn't listed. Would appreciate some help here. Thanks.

Topic by g6nhu    |  last reply

Page refresh while trying to vote

Trying to vote in the 3d contest and It just wont let me. the page just refreshes. I'm all updated win 7 64 pro, on a mac running firefox. everything is updated, and I have dumped my history cookies and cache.

Topic by SlickSqueegie    |  last reply

Trying To Make A Guitar Music Player

Hello, I have a very cheap Crescent Guitar with a bent neck. I had the idea of trying to turn it into a Ipod music player. The soundhole is roughly 3 1/2 inches. I don't know if the pod will be powerful enough for the speaker. Do i have to buy a small amp?

Topic by Sharpie6  

im trying to accesss a website at school?

I opened a notepad and wrote ping then saved it as youtube.bat then i open it up and command promt comes up then dissapears but why?

Question by sharlston    |  last reply

parsererror when trying to add photos

We have been trying to publish an instructable for my daughter in the toys contest (and time is fast running out as we have just got our internet working after a technical issue since yesterday!) and when we try to add a photo we get the following error message: There's been a problem updating your Instructable parsererror SyntaxError: JSON.parse: bad control character in string literal Any idea wha's causing this.. she has been working so hard on her entry and now can't submit it!

Topic by Twinmum    |  last reply

Trying to find an instructables article this year... Answered

... about an industrial strength cleaner for age-stained (pvc?) plastic. The article focused on making old pc's / keyboards look new. Tried the search function but no luck. Thanks.

Question by nikorin    |  last reply

Want to try out the Instructables superbeta?

We've got some awesome new features including forums, private messaging, and comment tracking that we need help testing out today. Send me an email (ewilhelm instructables) if you're interested in breaking the new site!

Topic by ewilhelm    |  last reply

Trying to repair micronta 22-164

I have a micronta talking multi meter 22-164 and after I put fresh batteries in it it keeps saying replace batteries. I found out other people have the same problem. 

Topic by tim4    |  last reply

trying to rember a movie i saw? Answered

i rember seeing this movie with my cousin i have no idea what the name is. all i remebr is that it takes place at a store kind of like sams club and they had the fastest chasier there but he was giving people free items

Question by knexsuperbuilderfreak    |  last reply

Trying to build an "Electric Chai Maker"

Hello All, I just joined this forum. I am trying to make my own Chai maker. It needs to 1. Boil water+milk 2. Grind to paste ginger and some spices ( 3. Mix the chai powder + spice pasto to boiling Milk+water. 4. Allow all the stuff to boil some time. 5. Filter the Chai. I am mainly looking for electric heaters and grinders which I need to use for this project. Any help will be appreciated. Thanks, K

Topic by kyfx2012    |  last reply

Trying to seal a system containing ethanol.

I'm putting the pipe system together for my solar thing, which needs to contain hot ethanol, not under significant pressure. What kind of sealant / adhesive can I use that won't dissolve in the ethanol? I'm gluing together mostly plastics like PVC, but also steel and aluminium.

Topic by SolarFlower_org    |  last reply

Trying to build a Alternator/generator welder?

Ok im trying to build a Alternator/Generator welder. i want it to be able to do Stick, Mig, and Tig. So other words three different circuts on one board. so i can switch between the three. 1. how should i control current: in between the battery and field post or after from the positive post from the alternator? 2. how to control the voltage: same as number 1 between the batt and field or from the batt post on the alternator? Also i understand the consant current constant voltage thing. that will be provided on the three circuts. Right now im just working on the stick welder circut ill ask about the mig and tig circuts later or you can pm if you have any info on them. im just trying to piece this togeather step by step. Any help will be great. and yes i know this is a very big project, and will require alot oof time to do.

Question by dmm1542003    |  last reply

Trying To Learn About Differnt Stuff?

Hello,  I am a disabled and housebound 55 year old man living on SSD checks.  I am not ever going to build a project to post on "Instructables",. I just barely got out of High School, and that seems like a hundred years ago, but this website fascinates me.  Before I got sick I could make anything out of wood or steel from junk I picked up I found at the dump.  I certainly am not an Educated Individual, but I am not stupid either, my Wife says I would be dangerous if I knew how to use my fancy digital Multi-Meter.  If I can get it straight in my head I can understand some things, but Electric Circuits and Componentes hit the wall in my brain.  I have never had any Training or Instruction about that kind of thing.  My question is why in the world would I be charged $40.00 (which I do not have to spend), for two years Membership in Instructables, when I am just an old sick man that will probably never even build another camp fire or anything else for the rest of my life?  I was just trying to learn some of this stuff to keep my mind Challenged and Hungry to Learn.  I spend Hours on this computer another man bought for me, so I would not loose my mind sitting here looking at the walls, or watching TV.  I just had to ask this question, to satisfy my Uneducated mind.  Can someone Please, Enlighten me to what the deal is, or is this some Private Covert Club that people like me can't be a member of because I don't know the private words to use or the handshake?

Question by srdd76  

My Maze Game: Try it yourself!

I noticed that The Jamalam had posted something similar, so I thought I would create some competition!  Instructions are included in the powerpoint itself ===What is it?=== Mega Maze! It's a maze that I made in MS PowerPoint 2000, so virtually any computer running any version of PowerPoint can run it! Features sound effects, 40 stages, 7 well designed levels and a bright and funky colourscheme! ===Download!=== Size: 42mb (approx) To run this you will need PowerPoint 2000 or above (I think older versions WILL work, but I'm not 100% sure) with Microsoft 95 or higher as your Operating System. So far I know this works with: Vista, XP and 95. To download the file click the link below: DOWNLOAD There are no viruses/spyware/sh!t that messes up your computer in the file. It will automatically start the game when you click "open"  And remember to check out all of my other cool Instructables and Forums too! -Lowney  Little preview + some of level 1:

Topic by Lowney    |  last reply

I'm trying to make a Breast Plate

Hey, I'm going to build a piece of FANTASY chest armor. I'm not going for realism or authenticity. Just making "a pile of spikes" that looks cool in my opinion. I'm thinking of making something to the equivalent of a low neck line tank top out of leather / tight weave canvas, and then covering it in steel plates. I'm thinking of dividing the front suit into groups and bands of plate. So I'm going to have a set of bands from the right and left chest, then another section that joins them down the center. A section for the abdomen, a section for each side, and then similar sections for the back. I'm then going to bolt the shoulders onto their respective chest plates. So I've done a crappy sketch on GIMP, Kinda explaining what I'm going to do for the center line of the chest. I think If I do this right It'll allow a lot of flexibility, might even be able to see my chest expand and contract while breathing which I think would be a cool effect. Is there any reason why this wont work? But are there any key factors that I need to take into account when doing this? Parts that need to be more flexible than others?

Topic by Deathcapt    |  last reply

Error 500 trying to view message

I received an e-mail saying that I was sent a private message (with the full text of the message) but when I go into the Inbox I do not see the message and when I click the Reply link in my e-mail I get the following error message: ERROR 500: com.instructables.exception.NotPermittedException: null or uninvolved or non-admin user may not view message XQM9PGUGA1BGJH0 Exception com.instructables.exception.NotPermittedException: null or uninvolved or non-admin user may not view message XQM9PGUGA1BGJH0  at com.instructables.manager.HibernateMessageManager.load(  at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)  at sun.reflect.NativeMethodAccessorImpl.invoke(  at sun.reflect.DelegatingMethodAccessorImpl.invoke(  at java.lang.reflect.Method.invoke(  at com.instructables.transaction.TransactionHandler.invoke(  at $Proxy15.load(Unknown Source)  at  at com.instructables.servlet.ActionServlet.prepare(  at com.instructables.servlet.ActionServlet.doGet(  at javax.servlet.http.HttpServlet.service(  at javax.servlet.http.HttpServlet.service(  at com.caucho.server.dispatch.ServletFilterChain.doFilter(  at com.instructables.filter.HibernateSessionRequestFilter.doFilter(  at com.caucho.server.dispatch.FilterFilterChain.doFilter(  at com.instructables.filter.TemporaryProFilter.doFilter(  at com.caucho.server.dispatch.FilterFilterChain.doFilter(  at com.instructables.filter.SecurityFilter.doFilter(  at com.caucho.server.dispatch.FilterFilterChain.doFilter(  at com.instructables.filter.SetupFilter.doFilter(  at com.caucho.server.dispatch.FilterFilterChain.doFilter(  at com.instructables.filter.NextPageFilter.doFilter(  at com.caucho.server.dispatch.FilterFilterChain.doFilter(  at com.caucho.server.webapp.WebAppFilterChain.doFilter(  at com.caucho.server.dispatch.ServletInvocation.service(  at com.caucho.server.http.HttpRequest.handleRequest(  at  at com.caucho.util.ThreadPool.runTasks(  at  at

Topic by jasonwebb    |  last reply

Trying to make a special autorun file. Answered

I want to put sketchup on a flash drive along with other files, then I want to have autorun give me start sketchup as an option.  I do have a lot of batch programming and a little autorun experience.  I already tried here; - but it won't work.  Maybe I am doing something wrong, HELP! 

Question by furrysalamander    |  last reply

Disarm Time/Use of Try-Buy programs ?

Hi can any one explain how to disarm the time or usage program on some of the try-buy & free software programs regards Colin

Topic by colin avila    |  last reply

Error Adding to Collection. Please try again. ?

Everytime I try to add a new instructable to my Collection. I always displays "Error Adding to Collection. Please try again.". Is there a limit on the number of instructables inside a collection?

Question by 2elev8    |  last reply

Error Adding to Collection. Please try again.

Everytime I try to add a new instructable to my Collection. I always displays "Error Adding to Collection. Please try again." I created a test collection (unpublished), it works fine. Is there a limit on the number of instructables inside a collection?

Topic by 2elev8    |  last reply

Error message when trying to publish Instructable

I'm getting this error message (pic attached) when trying to publish. PC Windows 10 Firefox and Edge (same error with both)

Topic by tgdula    |  last reply

Blank Page When Trying To Edit Instructable

I'm trying to edit an old instructable that was made back when "photo instructables" were a thing. When I try to click on the edit button, the page goes blank. Here's a link to the i'ble. Any help would be greatly appreciated!

Topic by Sadi789    |  last reply

Random Text. (Just try out stuff)

Tiny words on a post. Low

Topic by chaoscampbell    |  last reply

Error 400 when trying to view forums

This may be a problem with the server, or youre just updating it:

Topic by DJ Radio    |  last reply

im trying to make a paintball launcher. ideas?

I need it to shoot mutiple (6) paintballs at the same time?

Question by edward32214  

trying to find battery holder with timer switch?

I've looked everywhere I can think of, online and off. I'm trying to find a battery holder (2 AA or 1 C) with an incorporated timer switch. I'm trying to make a flameless candle with a timer. This is what I'm looking for...someone obviously makes them or something similar. This one has a four hour switch. TIA

Topic by lorraineg57  

I am trying to mount glass to metal,

 Similar to picture. How is this done and where can I find/buy such pieces of metal?

Question by mtalotti    |  last reply