wireless..............................................?

How can i detect a wireless waves ? i want to make this detector please tell me how can i make this?

Question by esfand_mhs   |  last reply


wireless

Are all wireless products such as cell phones or ummm.... home phones and everything else that doesn't use IR, use pulsed magnetic wave, or supersonic sound? I'm making a wireless power device that pulses magnetic fields, is this dangerous to my health? I don't want to be a mutant or be sterile or anything.

Topic by guyfrom7up   |  last reply


wireless motor

How may I construct a circuit so that I can trigger a motor from a distance wirelessly.

Topic by pro2xy   |  last reply


Wire to Wireless? Answered

I purchased some XCam2 cameras, They are hard wired. Due to the need where to locate them, I would need them to become wireless. This is a great site along with some great minds. Thank you all for your input.

Question by Boriqua   |  last reply


wireless xbox?

Hi, I have a desktop PC upstairs that is wireless capable but is hooked up to a wired modem. My Xbox 360 is downstairs next to the tv, I have a new wireless netgear router that I was wondering if I could just hook that up to my xbox downstairs and keep the pc wired upstairs, as I know that most my friends have their 360's plugged straight into the wireless router. Can I have both wired upstairs and wireless plugged in the back of XBOX? If so how

Question by pete-d-jedi   |  last reply


Wireless LED

Where can i get a transmitter for a wireless transmitter like this : http://www.zenreich.com/ZenWeb/motorcycle/riderlight.htmand how do i build something like that ?i need one for my brothers small battery powered scooter. i have most of it ready except for the transmitter, and i don't know what to do to make the LED's have a receiver.help !

Topic by mrcs   |  last reply


wireless camera

I have a (PC- LCD  flat computer monitor, it is a Dell 17"  that only has a VGA connector,  and I have a First Alert Wireless Security Camera(s) two. Model: A-560. My question is, What accessories do I need to connect the wireless receiver to the monitor so I can monitor what is going on through the cameras. Thanking you for simple instructions on how to do this. And what to buy. you can E-Mail me at: epro122@gmail.com Again, Thanks

Topic by eljero   |  last reply


Wireless camera?

I was wondering if there is a wireless camera you can make, get or buy. i want to make a wireless robot that will drive around and transmit video to my computer wirelessly. please help i wonder if there is a way to like convert a cheap webcam to a wireless one.

Question by ski4jesus   |  last reply


Wireless connection

I have an old iPod touch that I can hook up to my tv I was wondering how can I use that  To connect my new iPod touch to my tv wirelessly  like I want to old iPod to be the receiver  then I would tv out that on to my tv any suggestions thanks in advanced .

Topic by Darki34   |  last reply


wireless screen

What would be the best way to make a wireless display? A display that can be carried around (within like 30ft which seems to be fairly standard for wireless). It would need some batteries to power it I imagine, but I have no idea how you would go about sending and receiving the video signal. If anyone has any ideas, that would be great! Not a laptop, just a display, no other functions.

Topic by evillordnikon   |  last reply


Wireless Headphones

Does anybody know if I can get wireless headphones with multiple headphones receiving a signal at the same time from one transmitter? I DID google it, but I only got one useful source, and I figured you... smart... people (cough) would give me some clearer and more focused info

Topic by Ananand 


wireless monitor

Hi all, I'm in for my first topic: i'll get a new pc soon, and I wanted do install a 2nd monitor, not far away from my bed, so it would be easy to watch films. The pc would stand in the same room. Is there an easy way to connect an (old) tv, or a monitor (wireless) to your pc? Thnx Arnout PS, I'm from Belgium, so sorry for my English ;)

Topic by arnoutdejans 


Wireless Communication Answered

I want to make some small cheap (possibly from toys) walkie talkies it would also be handy if i could attach some headphones(with inbuilt [eg iphone headphones] or seperate mic) im hopeing to have signel ~100-500m but anything will do.

Question by s117   |  last reply


Wireless robotics ?

Could i be able to operate robotics through a wireless network, that is on differient networks? i plan on using modems to connect the robot to network and then dish satilights to connect modems to my computer

Question by knuckel   |  last reply


Wireless Power

----- Click Here for Full Story -----We may be able to say goodbye to power cords in five years, as Intel has developed a system called WREL (wireless resonant energy link) that could possibly run electronics without having to find a wall socket."Wouldn't it be fantastic if we didn't think about where the power was coming from and the power was everywhere?"said by Intel boss Justin Rattner in an interview with BBC. Rattner explained that through Intel's idea of "magnetic induction", the power source can be tuned through a resonator, enabling gadgets to receive power wirelessly. The report further explains:"Power is put into magnetic fields at a transmitting resonator - basically an antenna. The receiving resonator is tuned to efficiently absorb energy from the magnetic field, whereas nearby objects do not."Of course, there would be issues at hand if Intel's technology breaks through the mainstream. How are companies such as Monster Cable going to fair if this new possibility rises? Well, we'll just have to see until then.Just how long till someone makes this cheap?

Topic by Keith-Kid   |  last reply


Wireless Interface? Answered

Hello, Instructables.      I know it seems like I ask too many questions and post too little ibles, But trust me. I'm working on one right now. And thats why I am here. I am working on a wireless snes controller for PC, and am having problems finding a wireless interface for it. I know theres the XBee, which, being on a limited budget, is off the table. theres Bluetooth, which i have VERY little expirience in, but considering that just makes it sound like it would be fun, and, last but not least, there is InfaRed, which, having recently recieved a IR LED assortment from Electronic Goldmine, might be an option. i will look more into BT, since i do have a bluetooth enable pc anyway.

Question by Krayzi99   |  last reply


wireless speakers

I wanted to turn my guitar amp into a wireless speaker for my ipod and wanted to know if i wired an audio jack from the microphone connection of an old walkie talkie i have lying around and wired another to the speaker connection of another walkie talkie, if i plugged the one connected to the mic into my ipod and the receiving walkie into the guitar amp, would it work?

Topic by cirx08   |  last reply


Wireless Igniter?

I just recently made a pushbutton igniter system for lighting fireworks. ( a 9v battery goes through a momentary switch then to alligator clips which connect to the two wires coming off a Christmas light with the tip broken off. The end of the fuse goes in there and when the switch is pushed, the fuse lights) It works consistently without fault and I was wondering how I could make this remotly ignited. I understand that there is a way to just "replace" the momentary switch with some sort of receiver but I don't know where to go from there. If someone has knowledge of how you can do this or can redirect me to a sight with the parts I would need to accomplish this it would be greatly appreciated. thanks for the help   -flamethrower  

Topic by flamethrower1010   |  last reply


Wireless Power?

OK so recently I have noticed that almost any sort of power can be converted into a different type, sorta. Anyways, it takes power to create radio waves or any wireless wave. Would it be possible to just send out plain radio waves and get something to pick them up and convert them into usable power? Now I know the farther you were from the source, the weaker the power would get, so you might have too send out a fair voltage signal to get some good range. Also, would it interrupt any electronics in range or anything like that? I was just thinking about this and wondering if it is even possible to get actual wireless power around your house or something without using batteries or interrupting anything in your house. Thanks.

Question by noobererer   |  last reply


Wireless CameraI? Answered

Hi, is there anyway to attach a camera to a ROV, robot, RC car/plane? I was thinking maybe using like a radio transmitter to transmit the signal or whatever. Also accepting non-radio ideas. Oh, and the smaller the better, and long antennas=not an option. (Maybe a dish, but no antenna, atleast not the long kind).

Question by LiquidLightning   |  last reply


Wireless charging? Answered

So i would like to make a simple wireless charger for an ipod (ok ok its not so simple once you factor in the ipod) but i want it to be able to show a charging sign.... also it would be nice if it waould work from one or two feet apart minimum. I heard guys at MIT made one for a 60 watt lamp that worked 2 meters away... so its possible... i can probably order any circuitry if it is reasonably priced and available at digikey or mouser. :) I have access to several ipods so it doesnt really matter what model i use. I also know that this would probably make a huge electromagnetic wave... possibly? idk... but if it is big enough to destroy nearby electronics i might not want to try... So i am all for distance- the farther the better.... Also base power is not an issue, i can use a wall wart if i need to...i can just see an ipod touch with 500 passes of wire around it 5 feet away from a 2 foot square power station..... all while erasing my hard drive :) Soo.... im coming back to reality for a min.... anybody know any sites....any formulas too!! Thx! :) :)

Question by astroboy907   |  last reply


LED wireless

Hello everyone... anybody has any information about Wireless LED's ? or what is the mechanism of them ? Like The Fraunhofer LED that are wireless !!!

Topic by mojtabaw   |  last reply


wireless turnsignals

How would I design wireless turnsignals for my antique car that has not turnsignals?

Topic by tim54889   |  last reply


Wireless electricity?

How do I wire my tesla coil to power multiple receivers and how do I wire receivers if necessary

Question by wiccakingkamui   |  last reply


Wireless switch? Answered

I need to learn how to build a wireless switch that can turn something on like lets say a coilgun. I need it to be wireless so that i can stand back behind cover and fire my coilgun and do other things without harming myself or my classmates.

Question by budhaztm   |  last reply


Wireless Webcams

Ok after having a murder next door and a neighbor pulling a gun on another neighbor I've been thinking Homesecurity. I want to just set up a series of Webcams always streaming to my computer that i can just hit record at a moments notice, any suggestions

Topic by nekollx   |  last reply


wireless tachometer

We aim to do a miniproject -- contactless tachometer. using the principle of receiving the electromagnetic radiation emitted from the spak ignition engines using an antenna. the signal is ampliflied,filtered ,converted to pulses.using an ADC it is then converted to digital form , then counted and by making use of a lookup table,we aim to display the rpm using 1line 16 character alphanumeric display.PIC microcontroller is used for ADC,pulse counting ,storing lookup table and display interface.kindly post ur suggestions regarding this project..{{{}}}

Topic by jaas   |  last reply


Wireless Electricity!

I'm playing around with the idea of wireless power. It should be easily do-able over a short distance- my plan is to be able to charge something like my cellphone through induction, by placing it on a powered surface.. But- I don't know a whole lot about induction, so I was hoping someone could help me out a bit. Here is my setup: I'm using coils from old 5 1/2" floppy drives. I used them once before in a BEAM bot pendulum.. I set one coil on top of another. So far, by pulsing 9v DC through the coil, It sparks a little (because its shorting I assume) and the multimeter in the adjacent coil gives me a small spike of voltage, but quickly returns to zero. Zapping repeatedly gives me at best 2.5v, which is totally acceptable, if only it was sustainable. I've tried using AC 9v.. but I didn't seem to work either. I also tried some different on/off cycles with a BS2.. no luck. Any info would be quite appreciated..

Topic by sam   |  last reply


antenna for wireless connection?

I would like to improve the signal from our modem.  (serviced by centurylink)

Question by MizDaizy   |  last reply


Wireless speaker connection?

How can i replace the wire between my laptop and woofer, with a wireless alternative, so that i can play music from wherever i want at home ?

Question by sunboy89   |  last reply


Wireless connection problems

I bought a new wireless card for my computer and i can find my network but it refreshes every 5 seconds or so, so i cant connect because it times out. any ideas?

Question by gantyman   |  last reply


Wireless scout camera

Hi, Can someone please show me how to turn my ordinary wildlife scout camera into a wireless camera. It will email or text photos to me automatically from the field as pictures are taken

Topic by Jawalker   |  last reply


Wireless Dog Fence

Would love to have an instructable on how to make your own wireless dog fence.  Maybe 300 feet range.  

Topic by terdallaujar   |  last reply


Wireless setup for Guitar

IM new here... what a great site. My Question is. Does anyone see any reason why a baby monitor wouldnt work for a wireless system for guitar. Disconnect speakers install 1/4" buds and find a lil better housing?

Topic by jbartz   |  last reply


Wireless headphone with Microphone

Can anybody tell me how to make a wireless headphone and microphone. Both microphone and headphones should be wireless. I found that one can buy a wireless headphone or a wireless microphone, but not a combination of both. Why I need it. I make long phone calls, during which I need to walk around. If I use a cordless phone, I have to keep holding the receiver with one hand all the time. If I use a speakerphone, everybody around listens to the conversation. Therefore I need one wireless headphone with mic.

Topic by anilsaxena   |  last reply


N64 Wireless Controller

Has anyone been able to make a wireless n64 controller? I've been searching on the internet and the closest i think anyone has come is this. unfortunately, the wireless controller wasn't finished and if it was, it wasn't posted. anyway, if anyone has any information on how this can be done or, dare i say it, post an instructable i would be extremely grateful.

Topic by novenine   |  last reply


Wireless connection issue

Hi there, I'm having a huge problem connecting my desktop pc to the new wireless network at my home. I can connect via laptop and iphone but just not via my desktop that is using a wireless USB adapter. What can I do to solve this problem? What information do you need for anyone to be able to be able to help.  Look forward to any help

Topic by Nzginga   |  last reply


Clear Wireless Router?

I'm thinking about subscribing to Clear Wireless.. they want a $7 mo lease for the router. 1. Is their router proprietary or can I buy some generic wireless at Walmart or such? What do I buy? don't need anything fancy. 2. Radio Shack is carrying their product. The guy was going to give me the USB router but I'm worried I have to sign up for the $45 mobile service rather than the $35 home version. And money is super tight for me. If I buy a wireless printer will I have to buy a router to access it if I have the mobile/USB version? Thanks in advance to all you wise ones that help me. BTW: You watching Watson on Jeopardy tonight? Should be fun. WIPEOUT... humans that is.

Question by SacTownSue   |  last reply


Wireless pinhole camera

I found this 1.2GHz wireless pinhole camera online and I was wondering if I should buy that one or another 2.4GHz one please give me suggestions

Topic by Jakeg   |  last reply


Wireless LED light?

I would like to make an LED light that can be controlled by some form of wireless on/off switch. I cannot use IR as the switch will be in a different room to the light. I think I could use the Imp board I have seen on here but that seems expensive as I think I would need 2 Arduinos, 2 Imp shields and 2 Imps. Maybe I could use Bluetooth, Xbee or RF? Any thoughts? Cheers. Phil

Question by filthyPhil   |  last reply


Wireless water alarm

Hi all. Hoping I can get some suggestions. I have a water alarm in my basement, when it's sensor gets wet, it beeps. This does me no good since I can't hear it. What I'd like to do, it hack it so that instead of beeping, it lights a led I can hide somewhere in the house. Maybe in one of the wifes stupid knick knacks in the living room. If I just needed to wire the led to the beeper, I could figure that out. But I want it wireless. Any suggestions? Mechanically, I'm good. I know how to assemble, disassemble, solder, etc, but I don't know much about the electronics involved. I'm thinking I can use an inexpensive wireless doorbell as my transmitter and receiver. So, I guess what I need to do, is figure out how to incorporate the doorbell button into the alarm so when the alarm triggers, it activates the doorbell. Then, install an led in place of the chime and hide the whole shebang in something. (If it could also send me a text, that would rule, but it's way outside of my current skill level.) Will it work? How do I do it?

Topic by nitsuj1098   |  last reply


Wireless headphones to amplifier Answered

I took apart some wireless headphones because I wanted to hook up the receiver to an amplifier using a 1/4" male jack but in confusion I tore off the speaker leads and grounds I managed to find the leads (marked SP1 and SP2 I only want one side though since its a mono plug) if the Part marked SP1 is the lead how do I find the ground?

Question by AusencioFlores   |  last reply


Wireless Weather Meters

I recently completed my wireless weather meters project and thought you guys might be interested in it. It uses and Arduino, analog panel meters and XBee to be able to wirelessly display weather forecast information in any room in the house. Check it out at http://electronics.guy-smiley.com . Schematics and source included.

Topic by sstickeler   |  last reply


Wireless internet receiver? Answered

Is there any device that you can plug into your router in one room, and then connects wirelessly to a receiver in another room, and then that connects to a device such as a laptop? What I am looking to do is take the ethernet jack that is in my moms office and hook the transmitter up to it. Then take then take the wireless receiver and put it in my room to hook it up to my Apple Time Capsule. From the Time Capsule I would send the wireless signal to my laptop sitting right next to it. If you are thinking I could just hook my Time capsule up to the modem in my moms office, thats the way we have it set up right now, which gives me a very weak internet signal, if any, so if there is any device that will do this it has to send out a stronger signal than the Time Capsule. If you don't understand what I was saying you can look ant the diagram below. Is this possible?

Question by DBMods   |  last reply


Completley wireless headphones

I am attempting to make a homemade version of the Sennheiser MX W1 wireless headphones and was wondering if anyone else has attempted to do the same. I'm no electronic engineer so any help would be greatly appreciated. I will attach some of the schematics I've drawn up soon so you will have an idea of what I'm trying to do. Thanks, Sculptur.

Topic by sculptur   |  last reply


Wireless temperature sensor

Hi I am looking to start playing around with some solar projects. I am looking for a wireless temp sensor or sendor that can work with my Mac or something with a base station that logs temps. Something accurate, versitile  not too expensive would be great Thanks

Topic by xkravx   |  last reply


wireless help in linux...

I need some help configuring a netgear wg111 in slax linux....i know that i have to do someting with ndis wrapper, but where i get the .inf files and such, i do not know....any help is much apreciated!

Topic by fwjs28   |  last reply


Wireless Button Pusher

Hello all, I am trying to add/build a wireless button pusher to a grain management device on my farm. The device cannot be hacked into or tampered with, however, the button I am trying to push requires little force and does not need to be sustained. It only needs to hit the button when I hit a remote. Additionally, I cannot use a phone for this (my grandfather needs to be able to operate it as well and could not use a phone) So I would need to be able to connect two simple remotes.  Any and all suggestions welcome. 

Topic by larx   |  last reply


Wireless Turn Signals

I have toyed around with the idea of making a jacket that has the turn signals and/or brake lights on the back. However, there is a twist, I would like to see a controller box to wirelessly send the signal from a scooter to the jacket. When the turn signals and brakes are used on the scooter it sends a wireless signal to the controller in the jacket which relays that to lights on the back of the jacket. I've seen some jackets with lights wired on to them controlled with an arduino.

Topic by partyone   |  last reply


Rechargable Wireless Mouse

I had this idea a while back and have yet to see one made. Unfortunately I don't have the means to try it myself. What I thought was a wireless mouse which would be recharged with its own dongle. When the dongle is plugged into the computer the batteries inside would be charged up then when it is put into the mouse for storage those batteries would charge up the mouse. I don't really know a whole lot about electronics - despite perusing instructables now and then ;) - so I don't know if this is even possible. But I don't see why it couldn't be done, or why it hasn't been done yet {unless I just haven't found it}. Peace to you and yours, Matthew "Dra'Gon" Stohler

Topic by BlueDragonFire   |  last reply