145Views7Replies

Author Options:

I need help with a remote circuit. Answered

So here's my story: I want to impress my rc car club teacher person guy by building my own rc car from scratch, but I already have an idea about how to control it and stuff. I just need to make a rc circuit. Basically I need a radio transmitter that can be made with minimal parts, no i.c.'s, and it has to transmit at least 50 feet. And I need a reciever to pick up the radio signals and this also has to be minimal components, no i.c.'s, and it has to pick up the radio signals of the controller. I was expecting the signal to be in the khz section because it's easier to make that. So someone please give me a link or schematic for this. And also, the parts have to be what radioshack supplies. HELP!!!!!!!!!!!!!

Discussions

The forums are retiring in 2021 and are now closed for new topics and comments.
0
The MadScientist
The MadScientist

Best Answer 9 years ago

As Steve said an old circuit from the 50s or 60s will do the job but have a lot of parts. You can go for this circuit that does use an ic and is very simple ask the radio shack people if you can ship in the chips.

0
lemonie
lemonie

9 years ago


You want to impress someone by doing something you've hardly-any idea how to do?
No ICs - good luck.
Are you asking the rest of the world to Google you some schematics?

L

0
techno guy
techno guy

Answer 9 years ago

I already tried googleling the schematic and I got nothing that was helpful. It was all based in pic or arduino, or ir light.

0
lemonie
lemonie

Answer 9 years ago

Yes that's it, people use modern components these days.
Old-circuits have a lot more bits in them, but you'd be going back 30 years or more with an IC free design I'd think.
(I can't find anything like that)

L

0
rickharris
rickharris

9 years ago

Although it can be done - You will never match the bought option. Their skill, experience and equipment will far outrun anything you have access to.

0
iceng
iceng

9 years ago

I saw transistor only RC controls from China long ago about 11 transistors for 5'

Now days its all black blob stuff. Evan the dinky ones.
You do this and publish, I will send you a patch.

A

0
steveastrouk
steveastrouk

9 years ago

You need to go back to the old books, from the 50s and 60s when folks still rolled their own. They didn't use proportional control, just bang-bang.

Steve