1472Views25Replies

Author Options:

Wanted Arduino code writer (will pay) Answered

Hi friends. I need someone to help me write Arduino code for my project. I will pay 20 US$ for each code you make...will put the money to your paypal account, or if you like can order something for you from EBAY and ship to your address.. please msg me I send you the flowchart and what the code is sopposed to do. Thanks

Discussions

0
None
cdubs88

7 weeks ago

I am also in need of someone that can write code and program to an Arduino or similar device. Skill level would need to be around intermediate to advance.

In short, i would need you to program a micro controller, LCD Screen, microphone, speaker. You would be helping to build a prototype product. Willing to pay fair $'s.

must sign Nondisclosure agreement and show previous work.

0
None
Brijesh555

4 months ago

Hello

I need help with code.
Project is wirelss tranmsiiter using NRF24L01.
Tranmitter conditions.
Here we are using arduino mini pro and wokring with 3.3v battery. Conditions are 1. when battery is getting low it should send message to receiver.
2. There will be one tilt sensor when it is active it should send message to receiver.

Receiver.
when receiver gets message from transmitter that battery is getting low then any one digital pin should get high and also if message received as tilt sensor is active another digital pin should get high.

Tranmitter main condtion are battery should work minimum for 1 year.

0
None
CarciogOqamarshahzad

Reply 7 months ago

i need to make a battery ballancer with an arduino for my powerwall ,i have seven packs of 18650 in series charged from solar pannels,the arduino needs to find the one with the lowest voltage +-0.1v every 3000sec and switch on the designated relay witch will send power from a extra solar pannel to that pack pack of cells you need 8 input pins compare voltage between 1 and 2 with between 2and3 lower one compare with 2and3 etc,once the lowest one is found send power to a designated output pin for a relay to switch on extra charging,after 3000seconds repeat the proces
can you help,i will pay for your time ofcourse

0
None
drd123456789

1 year ago

hey guy i need a little help if possible, Im a student just leaning and i need help on some code with arduino. i would need a stepper motor to turn clockwise and anticlockwise depending on the position of a two position switch and controling the speed with a potentiomiter lowest meaning off and highest full speed.

can pay

thank you message me if theres anything you'd like to ask etc.

0
None
XristosB

1 year ago

I need some help too, same arrangement, please msg me if you are interested!

0
None
Funguypro

3 years ago

If you still need help just contact me!

0
None
jin7210Funguypro

Reply 3 years ago

can you do my project too if i pay

0
None
joroco23Funguypro

Reply 2 years ago

I need help writing an Arduino code as well for RGB LED strip. There are 144 50/50's on it and it is an addressable strip. I want the strip to be alternating colors Blue and White with each light between them to be off. So it will look like Blue-----off------White------off then repeat. Thanks

0
None
horizonfallFunguypro

Reply 2 years ago

I have the same request if your still interested..

0
None
RyanT132Funguypro

Reply 2 years ago

I have a 3 phase motor controller I need code made for, most of the code
was done from a previous person. I'm new to Arduino, so know nothing.
I'm willing to pay if need be. My email is lightningaudiollc@gmail.com
if interested!

0
None
joroco23

2 years ago

I need help writing an Arduino code as well for RGB LED strip. There are 144 50/50's on it and it is an addressable strip. I want the strip to be alternating colors Blue and White with each light between them to be off. So it will look like Blue-----off------White------off then repeat. Thanks

0
None
RyanT132Konstantin Dimitrov

Reply 2 years ago

I have a 3 phase motor controller I need code made for, most of the code
was done from a previous person. I'm new to Arduino, so know nothing.
I'm willing to pay if need be. My email is lightningaudiollc@gmail.com
if interested!

0
None
RyanT132Slk_Stephane

Reply 2 years ago

I have a 3 phase motor controller I need code made for, most of the code
was done from a previous person. I'm new to Arduino, so know nothing.
I'm willing to pay if need be. My email is lightningaudiollc@gmail.com
if interested!

0
None
RyanT132PhillipF9

Reply 2 years ago

I have a 3 phase motor controller I need code made for, most of the code
was done from a previous person. I'm new to Arduino, so know nothing.
I'm willing to pay if need be. My email is lightningaudiollc@gmail.com
if interested!

0
None
RyanT132Jonathanrjpereira

Reply 2 years ago

I have a 3 phase motor controller I need code made for, most of the code was done from a previous person. I'm new to Arduino, so know nothing. I'm willing to pay if need be. My email is lightningaudiollc@gmail.com if interested!

0
None
jazbon

3 years ago

Hi, I need a code to run a stair light project.

WS2811 addressable LEDS (50 in string) – but only use 32 of them

16 steps (2 Leds either side)

5v Micro PIR sensor - one at the top and one at the bottom of the stairs (2 PIR Total)

I will need the PIR to trigger a progressive fade illumination either up or down the stairs depending on which PIR is triggered. Then after a certain duration and / or if the other PIR is triggered then the lights should then progressively fade to black chasing the candidate either up or down the stairs. (i.e. step by step)

I would like some basic control of

Max brightness

Colour LEDS (I know that my LEDS are ordered RGB)

Speed of fade on (per step - assuming every step the same)

Maximum duration of time for all the lights to remain on before the ‘chase’ fade to black sequence begins

Speed of fade off ‘chase’ (per step assuming every step the same)

Notes –

I am currently using analogue read for the PIR sensors i.e. Serial.println(buttonState); if (buttonState >200) etc.

I have installed FastLED as a library already which may be of some use to you.

The wiring sequence is currently flexible but we shall assume the steps go led’s (1,2) (3,4) (5,6) etc… up to (31,32) – 16 steps

I would require a nice smooth fade with minimal stepping during the fades

Extras – if you fancy a bit of a mess around then you might want to give me a few cool effects (zaps, chasers effects etc. ). as a separate code once we have the basics working. The chances are I will need some more codes for various automation projects around my home.

Let me know if this project is for you and how much you would charge me for a working code.

0
None
goldenshuttlejazbon

Reply 3 years ago

I think u got it rong ma frnd..Im also looking 4 som1 to help me write a code 4 ma project. now I m posting the requirements i need on freelancer.com....I post the job, tell them my budget, and people around the world offer to do it . good luck bro.