Budget Bowl Lathe

I salvaged an AC motor from an old water pump I found on the side of the road and want to use it to make a simple lathe for turning green wood bowls and cups.  I was thinking about using a floor flange as the face plate, a nipple for the shaft and pillow bearing blocks to support it.  This assembly would be driven by a v belt and controlled by the speed controller from a jig saw.  I attached pictures of the components and a simple cad drawing of the assembly. Do you think this would be functional? Any recommendations?        

Topic by ischaren   |  last reply


art: bowling balls

I began collecting a few bowling balls with the intention of making decorative art in my flower beds. I have a neighbor across the street who undoubtedly has so much disregard for me that he reported me to the city code enforcer who said bowling balls were against code. I had a supervisor come and look at my yard and the bowling balls and he said it is art. The other code enforcer has required that I "anchor" them down. Does anyone have any suggestions? I'm sure no matter what I do the neighbor will not like it. He hates my trees. I have humongous oaks and lots of plants and shrubs. He has complained for 16 years now. He sits on his front porch and watches everything I do. He reported I had rats. They found the rats nest on his property. He claims the termites come from my home. Believe me, I have a small brick ranch that I do all the upkeep on. I think he just can't stand it that he can't tell me what to do like he does the rest of the neighbors. I'm a woman-maybe that's his problem. Anyway, how do I "anchor" my bowling balls without taking away from the art of them in my flowerbeds? Please help me. I want to abide by the city codes.

Topic by Bluejean1   |  last reply


Large Crystal Bowl Broken --- Any Ideas?

A large Romanian crystal bowl that has a lot of sentimental value for me was just accidentally broken. Any crafty ideas on how to reuse/repurpose/recycle this piece of my personal history?

Topic by cab47cpa   |  last reply


How and what to make a shaving bowl out of?

I want to make my boyfriend a shaving bowl for Xmas. I am handy with just about any medium and am not sure which I should use. Clay or Ceramic would be nice but I know nothing of either of them. It obviously has to be able to hold shaving cream...was wanting to make it in the shape of our cat (he's a big cat) so i guess the bowl part would be his body. So a bowl with a head, legs, and a tail. Anyone got any suggestions?

Question by Amanduh   |  last reply



How to make pet bowls without a kiln.? Answered

I want to make pet bowls from something like polymer clay. i know that polymer is not food safe. Any other suggestions on how to make pet bowls (food or water) without having to fire ceramics? Thanks for the help! :)

Question by silverart   |  last reply



How do I make a broken, valuable bowl into something cool?

I recently broke one of my grandmother's bowls and I want to turn it into something cool (it can't be salvaged as a bowl). I was thinking a hot plate or mirror with pieces of the bowl in it. Any other ideas and how would I do this?

Question by mc2044   |  last reply


Anyone knows how to make a homemade Bowl Extrusion Machine?

I'm trying to do a new shapes from a used PET bottles. Is possible?

Question by martindisenio   |  last reply


How do I stop our bigger dog from eating our smaller dogs food? ?

I have two separate area's of food for each of my dogs.  The bigger German/lab mix will eat the smaller Chihuahua's food even though the food in each bowl is the same.  The larger dog has a larger and taller bowl stand but will still eat from the smaller and shorter bowl of the smaller dog with out eater her own.  I'm sure it's a dominance issue but never the less, I would like to inhibit the larger dog from eating the smaller dogs food. 

Question by dgel   |  last reply


recipe for individual rice krispy treats in small mug/bowl featured item on Instructables. can't find recipe- Help

Recipe for individual Rice Crispy Treats in small mug/bowl featured item on Instructables. Can't find recipe-Please Help!! THX!! :O

Question by mozelda   |  last reply


Can someone tell me how to make a litter box? Answered

It is for my cat in my room. I do not want to get up and step in a pile of litter. Also, ideas for a feed bowl, water bowl, or bed? I might get a kitten soon.....

Question by TN777   |  last reply



what kind of water resistant coat should i use ? Answered

Hi Everyone ... i hope someone can help me with this is, or suggest me a solution, i am trying to make a custom sink for my kitchen. so what i did, is that i bought a  metal bowl from ikea, sprayed it with white, and then i drawed some paterns with photoshop and printed them on a vinyl sticker, witch i sticked to the bowl ( see the pictures ) . To not ruin my pattern, and because i have use the bowl as a sink, i need to coat it with somekind of resistant water coating to protect it ( a transparent coating ) .. any idea what should i use ? honestly i've been looking around and i can't find suitable solution.

Question by stregoi   |  last reply


Cutting or drilling a hole in sanitaryware?

An odd question, I know - but how do I make a hole in the bottom of an old toilet bowl without breaking it? It doesn't need to be a neat job...

Question by  


how do i get my toilet to stop leaking? Wax ring has been replaced. Bowl is not cracked. Water still leaks through.

To clarify... the leak is between the bottom of the toilet and the floor....

Question by    |  last reply


What sources of aluminum are safe for casting into cookware? I have lawnmower engines, soda cans, lawn chairs.?

I'd like to make some aluminum bowls and pans, what aluminum alloy sources are safe to use for this?

Question by robbtoberfest   |  last reply


How can I make my milk last longer? Answered

I enjoy a nice bowl of cereal now and again, but I don't particularly enjoy it when my milk goes *plop* into my bowl. After about a week, or even a couple of days after opening, if I have not drank it all, it smells a bit funny and I get leery.Mind you I don't fool around with products that state the date on which you might expire.My real question is this: Should I just buy quart size instead of half gallon size jugs as to make it last, or should I just hold cereal parties in my dorm to polish off the bugger in one go?

Question by Bigev   |  last reply


What are these? PLEASE HELP!!! ASAP!! Answered

What are these things in water? They appeared in her water bowl, but our male cat drinks out of it too though...What are they? They look sorta like tad poles or worms or something... PLEASE ANSWER ASAP!!!!!

Question by soldeir 9   |  last reply


How does thermoplastic work with curved surfaces? Answered

I was thinking about getting some thermo plastic. However, I wasnt sure if it would get creases in it if used over a spherical surface. If theoritically I put some thermoplastic over a bowling ball, would it match the curve of it? Thanks! -xD

Question by ! xD !   |  last reply


Gluing euro coins together??

I have some coins from various countries that I have visited and would love to make use of them. I would like to create a bowl using all of the coins but have not found a glue strong enough to keep them together. Could anyone please assist? I have attached an image of what I would like to create

Topic by Hurleysamson   |  last reply


How can I dye PET (polyethylene terephthalate)?

I'm making some bowls for a gift with PET bottles and I was wondering if there's a way to dye the PET, well an easy way, the homemade kind. I did a little research and basically found out that it can be done industrially with some expensive equipment and industrial heat resistant dyes, I'm thinking of using glass paint, any other suggestions. Thanks in advance.

Question by l4sh   |  last reply


Robo-jack-o-lantern

This is our front porch decoration for tonight. I wanted something a little more robotic for Halloween this year and this is what we're going to have. We just need to secure the bowl a bit more because it holds our leftovers pretty often. I just finished it up and don't have any lit up shots. I'll try and get some done tonight. Update: OK, got some night shots.

Topic by fungus amungus   |  last reply


White mold on algae?

Recently (as in for a few weeks), my bowl of algae has developed white goop floating in it. It looks like flour, and sticks together like flour. I (intelligently, I believe) have not tasted it, but it or something else in the algae smells terrible (well, worse than how terrible algae already smells, lol). I'm worried because Im donating samples of this algae to my middle school to use for experimentation, but a few, um, white things got in the samples. I really want to know what this stuff is. If anyone wants pictures, I'll upload some,. but basically it looks like flour and floats on top of the algae.

Question by Rotten194   |  last reply


Champagne Pomegranate Sea Salt & Goat Milk Bath: Recipe

Champagne Pomegranate Sea Salt & Goat Milk BathYum. This recipe is perfect for those of you who enjoy a long soak in the tub!Ingredients:1/2 Cup colloidal oatmeal1/2 Cup powdered goat milk1 Cup baking soda1 Cup Natrasorb Bath (starch)1 Cup coarse grain sea salts1/2 Cup epsom salts2 rounded Tablespoons shea butter3 Tablespoons Champagne Pomegranate fragrance oilInstructions:Melt shea butter in the microwave. Add melted shea butter and fragrance oil to a mixing bowl. Stir in Natrasorb Bath until all the oil is absorbed. Stir in baking soda, goat milk powder, and colloidal oatmeal. Mix well. Stir in epsom and sea salts and mix well. Scoop milk bath into 8oz. containers. Makes approximately four 8oz. containers with each holding about 7oz by weight. Pomegranate Champagne Fragrance Oil is available from Tennessee Candle Supplies. http://www.tncandlesupplies.com/Recipe is © 2008 Rebecca's Soap Delicatessen.

Topic by soapdeli   |  last reply


Star Wars X-Wing Rogue Squadron Costume

Hello Fellow Instructables Members! I created this costume over the course of 2011.  It is an X-Wing from Star Wars.  My friend and I designed it, and I built it.      The total cost was about $120.00.     The original plan was to make it simply a costume i could mount on the frame of a hiking backpack.  I decided to add in the option of placing it on my bike in order to take of some of the weight.  I had a bit of an issue with the front wheel though.   I can only make it balance when i am strapped into the backpack and sitting on the seat.  I should have thought this one through a little more clearly.  It would seem not everything in life can be "Winged."     The backpack mount is set just where R2-D2 would be.  I used my Dremel and cut a hole out a of a salad bowl.  It is not in the picture due to issues I had with wind conditions at the time and balance.  I'll upload pictures soon.  And yes, you can see out of the cockpit.  Seeing in, well, that's another story. Materials: ~ PVC pipe ~ Spray Paint ~ Hiking Backpack Frame ~ Insulation Foam ~ Red Hot Blue Glue ~ Glue Gun ~ LOTS OF ZIP TIES! Wingspan: 10' Length: 14' Any Questions, please feel free to message me :D Before I put the covering on it here is a test I did :

Topic by _-MacGyver-_ 


300 Costume Making Help

I want to be King Leonidas from 300 for Halloween, but I don't want a cheap vinyl costume, or anything like that. I want actual metal..just having some trouble figuring out what all to do.Helmet - I've heard that aluminum roof flashing is easy to cut and work with..any ideas on how to make the skull cap/hair on top?(Mixing bowl suggested by Jessy)Cape - I'm going to take a deep red piece of cloth, cut up an old belt for the straps, and make some kind of clasp.Spear - Probably some conduit with a cardboard or possibly metal tip (how does one paint metal?)Sword - If aluminum flashing is easy to cut, ill cut out a blade, and then a plywood handle. JB weld the blade into the handle.loin cloth thing - I might take some brown shorts and bleach the legs...I think i'd be doing everyone a favor by not wearing a real oneArm protectors - Not really sure about these..any ideas?Shield - A Pizza panIf you have any suggestions on how to improve my ideas/answer questions, i'd really appreciate it. Thanks.Pictures:http://www.kultureshock.co.uk/v3/images/pi_18622.jpeghttp://imdb.com/gallery/ss/0416449/FCJG3000088.jpg.html?path=gallery&path;_key=0416449&seq;=21http://imdb.com/gallery/ss/0416449/FCJG300061.jpg.html?path=gallery&path;_key=0416449&seq;=67http://imdb.com/gallery/ss/0416449/FCJG3000044.jpg.html?path=gallery&path;_key=0416449&seq;=91

Topic by Weissensteinburg   |  last reply


Something is making a mysterious noise.

So it's been awhile! Between school, homework, work, and playing with gadgets and such, I haven't gotten the time to post or make an instructable for quite a long time. But now, I'm back with a question. I see lots of new users here, and to them I say welcome to the community! You are going to love  it here, everyone is helpful, and you'll find answers to just about everything. I also see some members here that were around when I still used instructables. Remember me? How are things? :P Ok, so now for my question. A few weeks ago, after flushing the Toilet, a strange noise began behind our refrigerator. It was king of like a rattling, but not so much that as say, a prize wheel at a gameshow spinning and hitting something heavy. It's really quite odd. The refrigerator is a model with the built in water and ice dispenser. I googled it, and many seem to say it is something called "Pipe Rattling", but I don't think that is what it is, because it only started a couple of weeks ago and we have had this fridge for a year. I have drawn a diagram of the first floor of our house to help you get a better understanding of where the fridge is in comparison to the bathroom and the toilet. Like I said before, the noise only occurs after we flush the 1st floor toilet. Another odd thing about it is when the noise occurs. It can make this rattling as the toilet is flushing, directly after the toilet has flushed, and it has happened up to a minute after the toilet is finished flushing and refilling the bowl. The noise goes for about 5-8 seconds each time, and it only sounds once after each flush. We have not made any additions to the house before or since it started, have npt experienced any severe weather, and have not modified any plumbing in the house in quite a while, and never in that area of the house. In the incredibly bad sketch I made, you can see the bathroom, and the incredibly bad drawing of a toilet. The fridge is indented in the wall so there are cabinets surrounding it. Any thoughts on what this noise can be?

Question by kcls   |  last reply


The animatronic project Is finished

Here my instructableMy Animatronic Mod ProjectIn 2003 I made a casemod MONSTERMOD ( picture 1), Just a creature sculpture tearing out of a PC case.And It Didnt Move . So , I want the next MONSTERMOD to MOVE.Maybe to tell me that I have email.... Picture people's PCs having Heads .There favorite movie star or rock star maybe a animal. Maybe like Hal from 2001Space Odyssey .But, My animatronic Mod Has no A.I. But maybe one day. Im programmingthe 16 servo movements into the PC and press the play to play the movements a lipsync routine.Well, For Over 2 years now I have been working My Animatronic Mod.My Animatronic Mod is a floating creature head over a desktop case.( picture 2 IMG_1383.jpg)It controlled my a 2 Mini SSC II (http://www.seetron.com) this allow the computer to control 16 RC servos.16 RC servos = 16 Movements .I made the teeth out of dental acrylic, The samething denture are made of.Teeth and fangs are made 1st in tooth color dental acrylic and shaped.Then are placed in dental wax .,the mold is a silicone putty is place on the teeth allow to setup overnight.To demold the wax is melted away with boiling water leaving the teeth in the silicone putty sockets.This is called the lost wax process.( picture 3,4,)After I made the eyes out of dental acrylic ,Which is a molded ping pong ball is 40 mm .In half 20 mm sandwhich in between the 2 halves is a metal small metal ball 10mm give me a ball joint and socket.The iris is a painted metal washer. The veins are silk yarn And is cover with clear dental acrylic .The white of the eyes was changed to black color ,To give more of a alien look. ( picture 6,7)I molding the finished eyes alginate and casting them in ultracal 30, ( picture 8) Ultracal 30 is the hardest plaster made.And place them in the sculpture.This will be for Proper registration for the eyes in the skull.( picture 9 )I had to sculpt face in Roma Plastilina Clay ( picture 10)and mold it in silicone( picture 11a,11b, 11 ) This molding process called a matrix mold . A layer of water clay cover theentire clay sculpture and Ultracal 30 is place on top of the water clay .After setup ,Its demolded and water clay removed .This water clay has made a space for the silicone.Matrix molda thin layer of water clay is place ( picture 12 ) and made the core A .This gave me the thickest for the skin .Molded core A in silicone and a thin layer of water clay is place in this mold also this made core B.And this gave the thickest of the Skull. Now I have 2 molds.( picture 13,14 )Mold 1 is the Skin moldMold 2 is the skull moldI casted foam rubber in mold 1 ( picture 15,)http://www.monstermakers.com/foam.htmlTo make the foam rubber skin337 gms. base67 grams foaming agent33 grams curing agent15 flow enhancer24 grams gelling agent4 grams ammoniaThe room temp73 degrees 40%Using a Sunbeam MixMaster Mixer1. Speed #1 - 1 minute (to blend all components)2. Speed #10 - 3 minutes : blend all3. Speed #3 - 4 minutes : refine4. Speed #1 - 30 seconds :refine5. Speed #1 - 30 seconds : ADD GELLING AGENT ( picture 16 )6. Speed #1 - 30 seconds : Backturn the bowlFoam rubber can be tricky.Mold 1 was place in a Hot box oven for 11 hours at 125 degrees .= A very soft and flexable skin ( picture 15,16 )Hot box oven 3'x 3'x 3 " plywood box with foil insulation with a single burner. This must be watched.( picture 17,18,19)I casted urethane Plastic from smoothon.com in mold 2.This gave me the Skull,The skull was trimed and dental acrylic teeth and eyes were place inside the skull .The mechanics were place using R/C servos.The skin was painted with PAX ( is a flexible paint). The skin was glue on rubber cement to the skull .And the hair was glued rubber cement also and placed.Hair is from National Fiber Technology ,Hair 1 was Blended Black and Brown modacrylic with White and Brown Mohair and Natural Goat hair.And hair 2 Black with gray texturized modacrylic with Yak and Horse hair.The PCMy motherboard (MSI KT6) and AMD 2500xp video card (MSI 6600)The case is LIAN LI PC-V800B .To make the lip sync move ,I used VSA , Visual Show Automation , http://www.brookshiresoftware.comThis aloud me to make a lip sync animation routine. Synchronize with graphical audio MP3 file.Not only that My Animatronic Mod looks Wicked ,It Talks Back.(Picture 1st floor) ( Picture 2nd floor)I designed the animatronic so I could repair it if needed, And the support pipe is like a swing arm so I can work on the PC too. By removing the back of the skull. Inside there are 2 floors the bottom floor has 6 servos :1 Head Up + Down2 Eyes Up + Down and left + right2 Eyelids1 Jaw2nd floor 7 servos3 right,left and center Brows1 Nose3 upper lip wireAnd also 2 servos are in the Jaw for lower lip wireand 1 left + right servo gimbal= 16 servosWhen uncovered ,Here is 32 feet of servo cable.(picture32 feet )The only thing connecting to the PC and the Animatronic is a modular cable (Lookslike a phone cable). Which is plug into a modular adapter that plug into the PC's serial port . The end of the modular cable plug in Mini SSCII Serial Servo Controller.you would be surprise how many people are into making monsters. Ive beenmaking monsters , masks and makeup fx for 30 years now.I put my 2 hobbies that Ienjoy together.Computers and making monsters.Im a dental lab tech. for 20 years now .I make dentures for a living.Thank You so muchGary WillettTo see Video Demos http://www.youtube.com/willettfxhttp://www.servocity.com..................For Servoshttp://www.nftech.com/ ...................For Hairhttp://www.smooth-on.com/ ............ Silicone,Urethane PlasticbooksTechniques of Three-Dimensional Makeup by Lee Baygan Special Make-Up Effects (Paperback)by Vincent Kehoe Men, Makeup & Monsters: Hollywood's Masters of Illusion and FX (Paperback)by Anthony TimponeStop-Motion Puppet Sculpting: A Manual of Foam Injection, Build-Up and Finishing Techniques (Paperback)by Tom Brierton Stop-Motion Armature Machining: A Construction Manual (Paperback)by Tom Brierton MagazineCinefex

Topic by willettfx   |  last reply


Hydrogen Peroxide at home and in the Garden

Although the topic is quite old for some of us and mostly because I am too lazy today to make an Instructable: Hydrogen Peroxide ! Back in the day Hydrogen Peroxide was mainly known for the ability to bleech your hair, later it replaced chlorine based products for the preparation of paper and organic fibres. For me it is a good opportunity to go back in time and to pull out some of the remedies my grandparents already used. Who knows, there might be something that helps you or you might know other good uses that I failed to mention here, so feel free to comment. First off: What actually is hydrogen peroxide? We could check Wikipedia but I think it is enough to say that it basically water with an added oxgen mulecule which turn the stuff into a quite powerfull oxidizer. When hydrogen peroxide reacts the added oxygen is released and the normal water remains. Precausions and health risks. In the normal supermarket form hydrogen peroxide comes at a strenght of just 3%. This is just enough for wound treatment or cleaning off a fresh and small stain. The stuff you can buy at your hair dresser comes in concentrations of 5-15%, above that it is of little use to them. Pool grade peroxide however can come as high as 50%. It often requires a permit of at least leaving a copy of your drivers license to buy such high concentration but well worth it price wise. The downside of anything above 5% is a risk for your skin, eyes and airways. So when handling hydrogen peroxide you should waer long sleeve rubber gloves, safety or better swimming goggles and make sure that you don't create vapour by spraying it against the wind direction. Having water at hand to dilute and spillage on your skin is always good. What happens to me if things go wrong? Well, if handled correctly nothing should go wrong but of cause the worst would be eye contact. Getting concentrated hydrogen peroxide in your eyes means extreme pain and even with rinsing it out asap eye damage is more than just possible. Again: wear proper eye protection and if spraying use a filter mask, the paper type is enough!!! Nothing immediate happens on sking contact but a few minutes after contact the skin will turn slightly brown or goes white. This is caused by the oxygen release into your skin cells, if washed off quickly after noticing the discoloration will fade after a few hours. Prolonged exposure of the skin can cause skin cells to fully discolor and living cells might get damaged - a burning sensation is usually the sign that you need to wash the area now ;) Enough bad stuff said, let's see what we can do in the garden.... Fungal infection of your old roses or on your fruit trees? Sometimes the weather does not like our plants and by the time we discover a fungal infestation it is usually pruning time. There are commercial producta available that work quite well but especially the copper based ones tend to do more harm than good in th long run. An alternative is a solution of 10-20% hydrogen peroxide. Spray generously over all affected parts of the plant, leaves, twigs, stem and all. Make sure everything is properly wet! In some cases the fungus can act as a water replellent and it seems impossible to get any of the solution to wet these areas - a drop of dish washing liquid into the bottle will fix this! Watever runs off can be left as it only helps to get oxygen into the soil but of course you should not soak the area... Leave it on for about an hour, around 20 minutes if it quite warm. Rinse all off with clear water and repeat every 2 days for 5 treatments all up. After this time wait 2 or 3 weeks and check if the fungus still gows in some hard to reach areas. If so then repeat the treatment there until satisfied but wait another 2 weeks every 5 single treatments. In some areas of the world certain types of fungus on roses are refered to as "rust". ----- Moved into a new home and the garden beds smell really bad? The last house I moved into had a previous occupant with a big dog but no time to clean after his pet. The garden beds looked dead and I mean so dead that I could not even find weeds in them. And the smell was a distinct mix of old dog poo with lots of fresh cat poo mixed in it - the perfect outdoor pet toilet :( Trying to dig it all under made me recover that the top soil was more §$&*# than soil. I had to get rid of the bacteria of all the poo and somehow neutralize a lot of the unwanted "nutrients". The solution was to first loosen all the soil as deep as I could go. Then I added rice straw (but anything straw like or dry grass will do) to mix it through. At this stage I wished I had a gas mask LOL All up the contaminated garden beds covered about 20square meters. I got a 10 liter canister of pool grade hydrogen peroxide, from this I diluted down with 20 liters of water and a few drops of dishwashing liquid to help with the soil wetting. All was applied as evenly as I good with a watering can and then the area was covered with some tarp to try keeping as much oxygen on and in the soil as possible. A day later the tarp was removed and all beds watered with hose to drowning point. This watering was repeated every 3 days for 3 weeks to drive out all the excess and unwanted nutrients from the poo. The smell was already gone except for some cat urine residue which disappeared after some rounds of watering. Three months after the initial treatment I did some soil tests, added nutrients were required and the next season I had vegetables growing :) ----- Planting? Whether from seeds or seedlings, give hydrogen peroxide a try! I use a 5% solution to soak the potting mix I use before putting my seeds in it. Not only does it kill a few of the unwanted things that might still be in there but it adds a lot of oxygen into the soil, which gives the seeds a much better start. For seeds I use a 5% solution as well but only leave them in for about an hour before placing them between some wet paper towels until they start germinating. This way I can be sure all harmful bacteria and fungal spores are dead and I can use a sterile seed to keep going. Might just be my opinion but I think the germination rate is better and seedling in comparison start growing faster and stronger. Home uses.... As we learned before hydrogen peroxide, at least in higher concentrations is a powerful way to remove fungus. In our bathrooms we often have the problem that the ceiling starts to develop black spots as in the colder times water condenses here and takes a long time to dry off. If you now go to your favorite hardware store they will recommend the use of a chlorine based product, basically bleach... And although it does the job it also means your house will stink for days and if you scrub the ceiling you will get it on your sking and stink too. Hydrogen peroxide at 20% or higher concentrations can be sprayed onto the cleiling :) Of course you will need good protection for this and all things color should be removed, like towels or floor mats. By protection I mean a minimum of swimming goggles, a tyvek suit or similar to cover all exposed skin areas and at least a paper dust mask, better a filtered respirator like you use for spray painting or using insecticides. If you have a spray bottle with an adjustable nozzle then a stream is far better than a spray mist!! Not only is your exposure far lower but it much easier to wet the ceiling quickly. Wet all affected areas, then leave and the room, close the door and take off all clothes you used t protect you. The clothes can be left out to dry but double check that you had no soaked spot where your sking might have been in contact - if so rinse the skin with plenty of water! It will take some time to work and then dry, so best to do this in the summer time or if during the colder times you need to make sure the room is porperly heated and aired out to dry! Repeat until all black spots are gone, really bad areas will leave a permanent discoloration looking like a slight brwonish color is the ligh it right otherwise you won't see it. Once fully dry it is best to scrape off all lose paint and then to use a acrylic based sealer before giving the ceiling a fresh coat of white. The sealer will prevent the water to penetrate more than the paint level and if you get the fungus back on the paint it is far easier to clean ;) ----- Carpet cleaning.... When moving into a new rental with carpet on the floor you often are left with areas indicating the carpet might be "clean" but the underlay certainly is not. You can fix the underlay but you certainly can make sure all harmful stuff is gone from the carpet. Carpet cleaning machines can be hired but often much cheaper if you buy the "recommended" cleaning product with it. Rent is usually based on a daily base and price depends on how much cleaner you need. If you only want to desinfect the carpet which otherwise looks mostly fine than go for the smallest pack available and use it to spot clean areas you want cleaner first. For the desinfecting part I recommend to test how high you can go with the concentration of the hydrogen peroxide before using it on a big scale - keep in mind the carpet will never be fully dry and the remaining peroxide will continue to act! Test a 10% solution first before you go higher as you don't want to buy 30 liters or more of pool grade peroxide - just trust me on that one and only try to buy this much you do want to get into trouble a few days later! If 10 percent solution left on the carpet does not cause any bleaching of the fabric (unwanted bleaching that is) you can try higher for spot cleaning in demanding areas. A good spot to try the solution is under the cover or duct outlets, under these joining bars where carpet changes to tiles (if you can lift them off) or in wardrobes if the carpet goes inside. There are two way to treat your carpet once the general cleaning is done. a) use a garden sprayer or similar to wet the carpet This is good for single room treatment like for the baby room but especially on thicker carpets it requires a lot of solution and can become costly. Once wet leave for at least 30 minutes so the peroxide can do its thing, then use the machine with either the solution filled or just to dry off the carpet. I recommend to use the peroxide solution in the machine as it allows for better penetration and it will remove more soiled solution this way. If your catching container starts bubbling like mad it means you have a lot of §$%&#+ in the carpet and it might be best to first clean it all with the normal carpet cleaning agent before using the peroxide again - again tesing on smaller areas can help wasting the peroxide. If you need to store prepared solutions than it is best in a cold place. It will take several hours on an otherwise clean carpet for the peroxide to fully disappear so it best to use shoes and prevent skin contact during that time - especially if a baby crawls around ;) ----- Toilet.... We don't want to talk about it but everyone needs to clean their toilet sooner or later. For most things in there using the toilet brush when it happens will keep things clean and healthy. But what if someone in the house is sick or with a weak immune system? You could use all sorts of commercial cleaners and desinfectants but a wipe with wet towel or cloth soaked in a 10% solution of hydrogen peroxide will quickly eliminate all harmfull things on your seat, lid or bowl, including the buttons to press and the door handles ;) Just wipe and leave it wet for a minute or two then wipe again and ry - done! Personal use I always pack a small bottle of supermarket grade peroxide when going off road or camping trips. Although we now have modern desinfectants that won't stink or otherwise harm you I still prefer the old stuff ;) If you are far from civilisation than the last thing you want to need is medical attention for something that started as small as a scratch or graze.... Out in the unkown wilderness you will never know if the rockk you just crash landed on was used as a urinal by a fox the night before... A bit of gravel left in your skin might contain harmful bacteria... A cut with your own knife?? - What did you all cut since the last proper cleaning of the blade? You see where I am going here, a small thing might turn into something really nasty a day or two later. If you clean a freash and minor wound properly and then rinsie it with hydrogen perodixe most if not all harmful leftovers will be killed by the releasing oxygen. Of course this pretty much useless on bleeding wounds or where it is obvious that you won't be able to remove all debris from the wound - here it means you trip is still over in favour for proper medical treatment. The thing is that hydrogen peroxide was basically abandoned for all wound treatment once the modern "cleaning aids" became available as the peroxide will not only attack harmful things but also living tissue. The claims goes as far as causing bad scar tissue, damage to blood vessels and even "burning" of the tissue. One big problem I have with all these claims is that they were never really mentioned until the new meds came out. IMHO exposure time and how you use it it the key - common sense if you ask me. Noone should ever soak a wound in peroxide, if it is that big that you need to soak it you need medical attention anyway. And as said you should rinse the wound, that means all remaining liquid should be allowed to flow off - this will only leave a minor amount of peroxide in the wound and the exposure time will end with once all oxygen is released. For minor wounds I only use a paper tissue or cotton bud soaked in peroxide and wipe the wound.... ----- Smelly feet? Ok, maybe not the best way to start a conversation but we all know what sneakers do to our feet in the summer... Insoles with copper and activated carbon will help a lot and at least "cure" your sneakers while they are off your feet and have time to dry. But the smell is actually cause by bacteria growing from everywherey in your sneaker to your sking, actuall starting at your sking... If you wear your sneakers for long periods of time time or even whenever possible and also suffer from a bad smell hydrogen peroxide might be able to help you. Most sneakers will tolerate a machine wash and should come out germ free, if that is no option pack them in a sealed back and leaven them in the freezer over night - this will kill all bacteria and remove the smell. Now to break the endless cycle you need to remove the bacteria from inside your skin. So daily sock changes, freezing shoes and washing feet is a must! Your feet will really benefit from a foot bath in a 5% solution of hydrogen peroxide. To keep costs at a minimum use a container that is just the right size for your feet and prepare the solution from pool grade peroxide. I an ideal case you should not need more than 2 liters but all used product can be stored cool and re-used the next day, after that you need to make a new batch. Keep your feet submerged for at least 10 minutes. This will allow a deep penetration of the skin but might result in some white spots that will disappear after a few hours. Consenquent foot baths can be reduced to 5 minutes. After about a week you should notice that wearing your sneakes no longer causes and bad smell and you can stop the treatment. Freezing the sneakers over night, dialy (or more) sock changes and daily, proper cleaning of your feet should prevent any further bad smells :) ----- Bleaching your hair Althoug it was done for many years I really can't recommend using hydron peroxide for this purpose! Any concentration strong enough to have a proper effect in a reasonable time will at least cuase skin irritation. Back in the days they said your burning scalp is what you need to endure to get blonde hair :( And as said already you really don't want to get that stuff into your eyes... General uses If you have a fruit based stain then cahnces are hydrogen peroxide will remove it, especially if fresh. Even at supermarket concentration repeated application and proper drying off with a paper towel or similar will remove even red wine or beetroot stains. ------ Blood... On you skin blood is easy removed with cold water, same on other surfaces but washing off is no option a wet cloth or cotton piece will work fine. Hydrogen peroxide is good if things need to go fst or if the surface is porous, here the releasing oxigen will drive out the blood with the bubbles. ----- Fish tanks... If you love your tank then you really hate to medicate or even worse have a bad algea infestion, especially the stuff of the black kind. A change to activated carbon filter material is always recommended after a medical treatment to remove all leftovers from the system. However, certain medication simply won't be affected by a carbon filter and stay in the system until fully used or broken down otherwise. Especially in bigger tanks a partial water change is often out of the question as it would cause too much additional stress to the fish and plants. Hydrogen peroxide can help to break down most if not all remains of the used medication while at the same time adding more oxygen to the water. To be sensitive and safe in all enviroments I recomment to calculate the concentration based on the volume of your tank and to add the required amount of peroxide very slowly into the outgoing water stream from your pump. By slowly I mean in terms of a slow drip if using solutions over 10% to be added to the tank. If in doubt remove a suitable amount of tank water into a bucket and add the concentrated peroxide to reach the final tank limit. I strongly recommend to stay below 2% in favour over additional treatments a few days later if required. That means the diluted solution you add should be entered into the tank slowly if in doubt add a glass full every few minutes. For the treatment of the dreaded black algea you do the same 2% solution but be prepared that it will take several treatment until you see them die off. If you can then it is best relocate the fish for a few days so you can use a stronger solution of 5-8% just with the plants left in the tank. When transporting fish in a bag it can pay off to add a little bit of 3% peroxide to the bag to give additional oxygen for transport. I do this maually for every fish I buy from a store so I can be sure all fungus and bacteris is killed of before I introduce it to my tank. Really helps to prevent loosing a lot of fish just because you added one or two more to your tank ;) For the normal sized transport bags I use a good shot glass full of 3% peroxide in case you wondered. ----- Fridge and freezer Be it after long use or because you bought one second hand - once empty and warm some of our colling gadget just smell bad. A good clean with a hot water and your favourite cleaning agent is a good start, no need for aggressive stuff ;) If clean but still smelly, like after a power failure with fish in it you might want to go one step further. Best option is to use a spray bottle and a peroxide solution of at least 15% here. Use proper protection as mentioned above and spray all surface with the solution until soaked. What you can take out you take you take out, clean properly and then wipe or brush with the same peroxide solution. Bare aluminium should be handled with caution as in some cases it can oxidise badly, leaving a white and not removable crust behind. Here it is best to wipe and then wipe again with a cloth soaked in clear water to limit exposure time. No need to dry out - wipe out and check if it still smells, if so repeat and wiped off all areas as good as you can with a solution soaked cloth. Once the smell is gone dry out and enjoy smell free use from now on :) ----- Fruit and vegetables Unless you know exactly what happened to it you might want to clean your vegies and fruits properly before using them. Pesticides, herbicites, fungicites.... Not mention normal fungus and bacteria on the product.... On a commercial base hydron peroxide baths are often used to clean products for sensible people, hospital use or long term storage. For a personal use this only makes sense if you have free and unlimited access to the peroxide. An alternative are ozone bubblers. Expensive models can eb bought in shops or online, complete with timers or even a gauge showing the concentration in a room. On a hobby level for the kitchen sink we can use an ozone generator, air pump and bubble stone from the aquarium store ;) Let the pump bubble out the ozone for a minute or two, fill the sink with the fruit and veggies and move them around every few minutes. Best of course with an open window to limit you exposure to the ozone! Rule of thumb: If you can smell it is already too much in the air! The ozone in the water does the same as the peroxide: It breaks down harmful things with pure oxygen. The downside is that it is very harmful for your airways and body in general, so against all what youtube can offer I actually prefer to treat my fruit and veggie in a sealed bag. Place them inside, push out as much air as you can and then fill up with the ozone from the generator. Once the bag is full leave for about 30 minutes then wash and use or place the things in the fridge.

Topic by Downunder35m   |  last reply