Decorative Pocket for a Canvas Bag
Intro: Decorative Pocket for a Canvas Bag
I bought these canvas bags for so cheap it is embarrassing. And part of what drew me to them was that big white pocket on the front. I saw that it would be so simple to remove the pocket - embroider it on a machine and put it back on easily.
After taking the embroidery machine class at the TechShop http://www.techshop.ws I dug it out and brought it to the TS to do just that.
After taking the embroidery machine class at the TechShop http://www.techshop.ws I dug it out and brought it to the TS to do just that.
STEP 1:
I removed the pocket with a seam ripper being careful to snag only the stitches and not the bag
STEP 2:
I put it in the hoop and used a tear away stabilizer since the pocket is a light canvas with a lot of staying power and the design I chose (from the preloaded ones in the machine) was not too delicate
STEP 3:
I made my color selection (most of them provided by the Tech Shop http://www.techshop.ws) and rotated them as the machine dictated.
I made the mistake of removing the hoop and didn't get the whole thing quite back to the EXACT spot, but even with my goof it looks OK
I made the mistake of removing the hoop and didn't get the whole thing quite back to the EXACT spot, but even with my goof it looks OK
STEP 4:
I snipped all the threads and tore away the stabilizer
STEP 5:
I sewed the pocket back in place.
STEP 6:
now I have a bag ready to go. Here is a picture of another bag I did.