Disco Helmet
Intro: Disco Helmet
I wanted my surfing helmet to be a little more identifiable. a little more.... disco.
This is a Gath helmet covered with mirrored acrylic squares 1/4"x1/4" cut on a laser cutter. Glued with some glue that works really well It is clear and flexible. i think it is a urethane glue.
This is a Gath helmet covered with mirrored acrylic squares 1/4"x1/4" cut on a laser cutter. Glued with some glue that works really well It is clear and flexible. i think it is a urethane glue.
STEP 1: Start With Your Helmet of Choice
in my case an XXL Gath surf helmet.
STEP 2: Cut Lots of Mirrored Pieces.
best not to use glass, it's sharp.
so i used mirrored acrylic.
1/4inch pieces square are great, but i guess you can use any mosaic pattern you wish.
so i used mirrored acrylic.
1/4inch pieces square are great, but i guess you can use any mosaic pattern you wish.
STEP 3: Glue Them On
i used this clear adhesive. waterproof, seems to have worked well.
a year of use and i've only lost a handful of mirrors.
a year of use and i've only lost a handful of mirrors.
STEP 4: Let It Dry, Wear It,
ride with it!
the ifabricate programmer in chief is cameoed here....
the ifabricate programmer in chief is cameoed here....
12 Comments
nancyjohns 9 years ago
this is fantastic, especially for the second 'ible EVER.
Zaphod Beeblebrox 14 years ago
Zaphod Beeblebrox 14 years ago
sir-zeke 14 years ago
Flumpkins 15 years ago
fishhead455 16 years ago
spiritualdawn 18 years ago
jongscx 16 years ago
Metal4God 16 years ago
limey 18 years ago
Shamigo 18 years ago
wolfenstein 18 years ago