Diy 5.8Ghz Fpv

Intro: Diy 5.8Ghz Fpv

this is an 5.8ghz wireless camera. it can go 2km far in the air

STEP 1: What Do You Need?

the first step I did was looking for the datasheet of the 5.8ghz tx module

STEP 2: Put Tin on Each Pin

STEP 3: Soldering the Parts

first you put on the dipswitch you need to cut off one pin and the other 3 solder them on and as gnd u use the metal plate

STEP 4:

now you put the other cables and the antenna on. i bought an normal 5.8ghz one and cut the end off striped it and you ready you can see on the chip were to solder evrything.

STEP 5: Parts List

1. Boscam FPV 5.8G 200mW Wireless Audio Video Transmitter Module TX5823

http://www.banggood.com/FPV-5_8G-200mW-Wireless-Au...

2. 2 x JST Connector Plug With Connect Cable For RC BEC ESC Battery

http://www.banggood.com/Wholesale-2-Pairs-15cm-JST...

3. Boscam FPV 5.8G 8CH AV Wireless Receiver RC805

http://www.banggood.com/FPV-5_8G-8CH-200mW-AV-Wire...

4. 5.8G 4 Leaves Omnidirectional Gain Antenna For Receiver

http://www.banggood.com/5_8G-4-Leaves-Omnidirectio...

5. FPV 1/3 Inch HD Color CMOS 600TVL Mini Camera PA

http://www.banggood.com/FPV-1-or-3-inch-HD-Color-C...

6. WLtoys V959 V212 V222 RC Quadcopter Parts 3.7V 500mAh JST Battery

http://www.banggood.com/Wholesale-WLtoys-V959-V212...

7.3.7V 1S Lipo Battery USB charger JST plug 500ma output

http://www.banggood.com/3_7V-1S-Lipo-Battery-USB-charger-JST-plug-500ma-output-p-91269.html

Comments

[jency001]

i published the part list

[jency001]

if you buy the parts from the video then you will pay a lot

i bought them way cheaper

[zanderboy88]

Ok write up, but maybe a parts list? little more explanation for newbies and less experienced? links or stores you purchased the parts from? I love FPV and I'm very excited to see more like this on Instructables!!

[builderjoe]

Here's a video with part list and step by step guide.

https://www.youtube.com/watch?v=nt6kYWbMQIM

[jency001]

i Will put on the list later today and its not that hard to build

[Tecwyn Twmffat]

Please could you give us a parts list? Thank you.