Introduction: Easy PVC Pipe Mini Marshmellow Gun
this instructable will show you how to make a marshmellow gun that shoots mini marshmellows. they're fun to use in marshmellow fights with friends, siblings, or even to shoot at pets. it wont hurt and they get a snack
you will need:
1/2 PVC pipe- 26 in. minimum
1/2 in. cap-2
1/2 in. tee connector-2
1/2 in. elbow connector-2
PVC pipe cutter
1/2 in. coupling connector-2 (optional)
spray paint- any color (optional)
you will need:
1/2 PVC pipe- 26 in. minimum
1/2 in. cap-2
1/2 in. tee connector-2
1/2 in. elbow connector-2
PVC pipe cutter
1/2 in. coupling connector-2 (optional)
spray paint- any color (optional)
Step 1:
cut to the PVC pipe into 7 sections
2 in.
3 in. (4)
4 in.
8 in.
2 in.
3 in. (4)
4 in.
8 in.
Step 2:
add two 3 in. pieces to a tee connector
Step 3:
add an elbow and tee connector to the 3 in. pieces. the elbow will be the back
Step 4:
attatch the handles. 3 in. pieces to the tee facing down and the elbow
Step 5:
add caps to the bottom of the handles
Step 6:
add the barrel and the 2 in. piece to the tees as shown
Step 7:
put on the elbow and 4 in. piece of pipe and youre done
Step 8:
spray paint. for this i made 2 and spray painted one silver and one blue. then i took them apart and interchanged the pieces.