Introduction: Finger Snowboard
finished
Step 1: Materials
u need...
-1 sheet of paper
-liquid glue
-popsicle stick
-1 teck deck with wheels
-1 without wheels
-1 sheet of paper
-liquid glue
-popsicle stick
-1 teck deck with wheels
-1 without wheels
Step 2:
take a peice of paper
Step 3:
add glue to half of paper (spread with popsicle stick)
Step 4:
fold in half
Step 5:
repeat to more times you should have a paper roughly 10 1/2x7 cm.
Step 6:
smoosh paper between teck decks.
Step 7:
clamp (48 hours)
Step 8:
trace board
Step 9:
when dry cut out
Step 10:
laminate it(waterproof) or cover in scotch tape
Step 11: Boots
if you want you can attach your own boots i used the hard paper left over(the board trimmings)
please comment
please comment