Introduction: How to Make the Naruto Shippuuden Jacket!!!!
Alright, it's Tobi-kun here... now i have been making a naruto jacket from the origional series and i thought hey what the heck so i took off all the stuff i hsd on and started to make the shippuuden jacket. And for all of you narutards like me out ther it's really not that hard so here we go!!!!
P.S. Tobi good boy.
P.S.S.
P.S. Tobi good boy.
P.S.S.
Step 1: Materials!
alright now i got just about all of the materials needed. It will cost about 15-25 $ depending on how good of quality the stuff is.
now you will need 1 yard of slightly dark red cloth
2-3 yards of black slightly shiny cloth
various peices of wood ( i will explain later... i promise)
an orange jacket
a good reference
good backround music...lol
This pic was my first naruto shippuuden jacket.....
now you will need 1 yard of slightly dark red cloth
2-3 yards of black slightly shiny cloth
various peices of wood ( i will explain later... i promise)
an orange jacket
a good reference
good backround music...lol
This pic was my first naruto shippuuden jacket.....
Step 2: CUT CUT CUT!
Alright now is the absolute WORST part. It is at least a MILLION times easier if you have an exacto
knife, well also this is one of the most time consuming because there is alot of just plain judging where all the lines are. so here lets start...
knife, well also this is one of the most time consuming because there is alot of just plain judging where all the lines are. so here lets start...
Step 3: Now That We Got That Out of the Way...
Alright now who has a sewing machine in here raise your hand... (1, 2 , 3 and 4...) Well you absolutely DO NOT need a sewing machine, if you dont then use fabrick glue... the one i reccommend is Tacky Glue. It dries nice and clear. now if you need help with positioning of the peices here ya go!
Step 4: Collar
probably my 2nd favorite part of this whole project. Now cut the the hood of the jacket at 6 inches all the way across, fold it as neat as you an and glue or sew. Then cut out the black collar from your stash of black fabric. Glue or sew the black on, let sit for at least 15 min (if you glued it ) now try it on and your done with the collar.
Step 5: The Slingshot!
now there are alot of ways to do this but the easiest way is this: get a base of round wood approxamitely 2 inch diameter... get some mdeling clay , form the swirl. get two 2 inch rectangle peices of wood and hot glue them to the swirl then like magic its done. ( after you paint it the appropriate colors.
Step 6: ALRIGHT......
ok so your most likely all done so make the finishing touches and i will be back with MY COMPLETED jacket. I will probably be just about done in two weeks tops...(it's feb. 7 09) so hang in there.. i will also be making an istructable on how to make an Akatsuki cloak, sasuke's costume and sasuke shippuden costume.
Alright so good bye and in 2 weeks i promise i WILL have pics of the costume
ToBi GoOd BoY
Alright so good bye and in 2 weeks i promise i WILL have pics of the costume
ToBi GoOd BoY