I Am gonna teach you pretty much how to put skateboard trucks on the back of a razor scooter.
It works really well and if you have long board wheels or scooter wheels put those on the trucks.
It Goes way faster and Looks cooler.
Don't Take Credit For MY idea
The actual razor company made one of those 3 wheel scooters about a month after i showed my friends that i made a 3 wheeled scooter.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Stuff You Need
2-Bolts(Doesn't matter size just have to have same drill bit size)
5-Wheels (long board or scooter wheels work best)
6-Razor Scooter Has to be a razor
Step 2: Taking the Back Wheel Off
So you have your scooter.
To take the wheels of all you have to do is get 2 Allen keys and turn them opposite ways on the wheel.
Until it loosens
Then just loosen it all the way.
Step 3: Take the Break Off
All you have to do is again with the Allen keys
Just take of the bolts with 2 Allen keys and force it out it will come out
you just have to make it.
Step 4: Drill the Scooter
Get your trucks and place them on the bottom of the
scooter and get your sharpie and put marks were the truck holes
are. Then move the trucks and put the scooter somewhere level and drill the holes.
It has to be exact or the trucks won't fit and scooter will be ruined.
Step 5: Add the Bolts
Now with your nice holes
Get your bolts and put them threw I put long bolts then cut them with a hack saw after i put everything together. So they wouldn't come off over time.
Step 6: Add the Trucks
You should now have bolts sticking out of your scooter put the trucks thru the
bolts and put a nut on the end of the bolt. Now your trucks are on.
Step 7: Im Ready to Ride
Now go and ride it.
V V V V V V V V V V V V V V V V V V V V V V V V V V V