Introduction: 3D Print Your Own Scrabble Set

By Jason Powell
About: I make things, and I sometimes attend classes at Columbia University - but primarily - I make things ~ especially from scratch... Please don't mind the currently perceived dearth of designs on my page, I very …

This is a whole Scrabble set I designed and made to be used for replacement pieces or to build your own set from scratch...

Here's a video explaining how to set the pieces up for dual extrusion and explains the difference between my three different designs...



Here's the Thingiverse Page...
http://www.thingiverse.com/thing:935836

Here's the YouMagine Page....
https://www.youmagine.com/designs/complete-scrabbl...

The dimensions are 19x19x4 which is the standard scrabble piece size...

I have 1 design for dual extrusion which takes to STLs... "Dual_Letter_X" and "Dual_Shell_X"... I explain in the video how to print them if you're not familiar with dual extrusion...

I also have two designs for single extrusion... One with a cut in where the letter is and another with extruded letters so you can make a Z stop at 4mm and change filament to a different color...

Everything else is self explanatory.... If you have an questions or comments, feel free to leave a comment or message me directly...

Enjoy!!!