3D Printed Bluetooth Speaker Tube I

Intro: 3D Printed Bluetooth Speaker Tube I

Approximate project cost: <$20

Max print dimensions 150 x 60 x 66mm

Visit www.project3dprint.com to download the free STL files and order the electronics for this project! Then watch the instructional video on how to assemble it all together!

This little Bluetooth stereo speaker is super fun and easy to print and build! The tubular design has a much smaller print envelope than our very first Bluetooth speaker project making it ideal for those smaller print beds. But don’t let its size fool you as it still packs a little punch! Features Bluetooth connectivity, an inbuilt FM radio, USB and SD card support, an inbuilt microphone for hands free talk and even a remote control! Powered by a single rechargeable lithium-ion battery you can take this unit anywhere, and your tunes will be pumping for hours! (Approximately 10 hrs playback). Recharge the unit via the 5V mini USB input which you can connect to any 5V charging device or your computers USB port.

This project also comes with a BONUS STL file which allows you to 3D print the black Bluetooth module fascia panel! Color match or mix the printed parts to suit your hearts desire!

Share

    Recommendations

    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge
    • Audio Contest 2018

      Audio Contest 2018
    • Optics Contest

      Optics Contest

    Discussions

    0
    None
    grimmjowking

    2 years ago

    is there a special way to tune the FM radio