3D Printing - Shuriken

Introduction: 3D Printing - Shuriken

About: I'm an electronic engineer and i love to learn new stuff and also share my knowledges with everybody and make tutorials to teach about the things that i make.

Hello!!, If you are a Naruto and ninja stuff fan this short instructable is for you. Just download the .stl file on the link below:

http://www.mediafire.com/file/jzzjlen04n0di02/shur...

Now upload the .stl file to your printer program and print, you shouldn't need any modification of the .stl file. If you are going to print with abs make sure to spread some hair spray on the heat bed.

And that's all folks, if you have any doubt or problem when printing you can ask for help on the coments. I will be happy to help you. Happy printing!!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Design Now: 3D Design Contest 2016

Participated in the
Design Now: 3D Design Contest 2016

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    Discussions