Hello I print with my 3d printer prusa i3 mk3 a mold to make a label silicone patch, I discovered by chance that the wd40 was compatible with silicone and that it allowed to make it more fluent without altering the composition
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Step 01:Slicone and Other.. :)
this picture is a silicone i use for create this silicone patch.
ACANSIL 3022 BASE.
CATALYST and WD40.
proportion about quantity
SILICONE 10 GRAMMES
WD40 2 GRAMMES
CATALYST 1.5 GRAMMES (RED is fast curing)
Step 2: Step 2: Color and Mixing
for yellow and other color i using Smooth-On so-strong
i mixt silicone in first and after add WD40 and catalyst
Step 3: Step 3: Silicone Into Mold
after silicone is mixted i put inside a mold and wait for one hours.
Step 4: Step 4: Next Color
After one hour i preparing the grey color and put in the mold over the yellow color.
Step 5: Step 5 : Unmold
after waiting 3 hours ,unmold silicone patch :)
happy trying :)
i add original file stl