3x3x3 LED Cube With Optional Pc-control

This is my 3x3x3 led cube. Original is he controlled with a pic16f628a. It has 27 leds and each of them can be controlled by the pic. You can see below a video of my cube with the pic.

I have a file, voorbeeldprogramma.hex, also uploaded so you can make it.




PC Control
Also i have controlled the cube with a computer. I have used a max232. As you can see in the image above, there is an optional print. One side goes on the cube, the other on the serial port at the computer. The schematic in the images

Share

    Recommendations

    • Make it Glow Contest 2018

      Make it Glow Contest 2018
    • PCB Contest

      PCB Contest
    • First Time Author

      First Time Author

    7 Discussions

    0
    None
    PradeepV13

    2 years ago

    sir sand circuit diagram

    0
    None
    vishalapr

    7 years ago on Introduction

    This is the only LED cube ible that answers my question that no other cube ible has answered!
    Liked it a lot and rated it 5*
    Very well done!
    Have a look at my ibles I made and vote, comment and rate them if you liked em! ;)

    2 replies
    0
    None
    martijn222vishalapr

    Reply 7 years ago on Introduction

    Thank you for your response!
    May I ask you what no other cube has answered?

    I should take a look at your instructables!

    0
    None
    vishalaprmartijn222

    Reply 7 years ago on Introduction

    Thanks and the things I didn't understand by reading other cube ibles were
    "I have used a max232" and the schematic in this ible is easy to understand for people like me!