# AC to DC - Full-wave Rectification

1,250

16

3

Hello everyone, here is the full-wave version of my AC to DC converter.
A few of you might have seen my Instructable a couple of days ago on how to convert AC to DC using half-wave rectification. Well, by adding just three more diodes (a total of four) you can full-wave rectify AC. Take a look.

### Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

## Step 1: What You'll Need

The things you'll need are:

The stuff from the other Instructable.

Another three diodes, so now you should have a total of four diodes.

## Step 2: Do It!

All you have to do now is wire it up! Simple!

## Step 3: And of Course, a Physics Lesson

If you saw the last Instructable, you'll know how I like physics - a lot. So.

In this circuit, the diodes are called rectifiers. Even though AC changes direction so quickly, diodes only allow current to flow one way.
So when the current tries to flow the other way, in our circuit here the extra diodes get that backwards flow and direct it the same way as the other ones.
This results in a fluctuating waveform with the waves next to each other (pic. 1). That's where the capacitor comes in handy. It smoothes the waveform.
See my other Instructable on this.

If you get confused about waveforms and stuff, look at the second pic.

If you have any problems, don't hesitate to comment or email me at robinweaver2001@gmail.com

Thanks for reading, please follow for more cool electronics tutorials.

## Recommendations

• ### Large Motors Class

13,414 Enrolled

## 3 Discussions

"All you have to do now is wire it up! Simple!"

Even if it's simple, we'd still like to see how it's done...

2 replies

Then again, I haven't actually made it yet, this is based on knowledge

I can't believe you commented! I'm such a big fan, I love your Instructables. Updating now....