AK-47 - Avtomat Kalashnikova 1947, Knex

17,954

38

289

Published

Introduction: AK-47 - Avtomat Kalashnikova 1947, Knex

About: KEVIN GOBLIN ^^^^ made by dj '''I AM NOT BARRACK OBAMA I am barrax Obama.''' im close to stopping ibles and deleting my knex account i mean stopping knex and deleting my ibles account.
Avtomat Kalashnikova Rifle Model 1947

Otherwise known as the infamous,

AK-47

Hi everyone, Barrax here, with a little message about a mate of mine called MotaBoi.
This is just an ad for him, and I'd greatly like it if you could subscribe to him.
Here's his page - he's got some great guns coming up, including an M4, that started off as a collaboration between me and him. However we drifted our own ways, and we are now going to post them at the same time.


So, heres his page: >>> https://www.instructables.com/member/MotaBoi/ <<

Updates:
1.0 - Base Gun with no updates and no accessories

About my gun:

Credits to The Dunkis' for the (most excellent) magazine.

Based off of the Ak-47 in Call of Duty 4: Modern Warfare

Stats:

 

Model: AK-47

Mechanism: FPM over stock

Range: 30-60 depending

Magazine: Dunkis’ STANAG

 

Pros:

Great looks

Better range than some of my others

 

Cons:

Complex stock

Broken Y connector L


Pieces Warning: This build may take up a lot of your pieces. It includes a large count of Y connector "Black Hands" Not as many as the ACR, but still a few. Also, this will require 8 half orange connectors and it *might* break a Y connector in the trigger - *might*.

If you can, please take time building this.

I will look forward to seeing your comments.

And last but not least, please comment, rate, comment again, then subscribe :)


Next gun: M4 Carbine. after that, either Desert Eag;e .50AE or Spas12



Step 1: Barrel

Barrel

1 the barrel (and the mag lol) - make
2 make
3 make closeups

Step 2: Trigger, Handle and Back Mag Wall Assembly

Trigger

1 make
2 make
3 make

Pieces...

4 make
5 make (read note)
6 make
7 make
8 make (from another angle)

Handle

9 handle start making
10 make lol notice the grey connecor on one side... put a white rod on yours if you dont want to put the grey on...

Mag well

11 make
12 assemble

Assembly

13 add
14 add sure you put the grey con on the right side.
15 add resting on the white conn
16 add
17 add
18 add, make sure you get the y con the right way round (if yours is broken).





Step 3: The Dunkis' Magazine

1-5 make

Having trouble?

Right click this and open in new tab/window:

https://www.instructables.com/id/Remington-ACR-Adaptive-Combat-Rifle-Knex/step2/The-Dunkis-Magazine/

Step 4: Inner Body + Back Sights

1-4 make, not hard

Step 5: Body Side Panels

1-2 make the side panels

Step 6: Assembly, So Far

1 connect
2 slot this on, but dont take the barrel out
3-7 follow pics

8 what you should have with the mag in

Step 7: Adding to the Body

just follow the pics...

nothing too confusing, apart from pics 3-7 are the same part...

Step 8: Grip

just make it...


blaa

1 is what you should end up with

Step 9: Fore Barrel

make

Step 10: Firing Pin and Assembly

Pin

make

also, get either a bigger elastic, or 2 #64s tied together

dont forget tape

Assembly

3-7 are for the complicated trigger bands

Step 11: *** Stock ***

This stock is extremely difficult to put together.

You may feel better making your own XD

Nevertheless, if you think you are good enough to make mine, here you go:

Dont let that put you off BTW, its not too hard.

just follow the pics through, slowly...

zoom in if you need help with the rubberbands..

Step 12: Done

Have fun with the AK.

If you're having trouble making it... i'll try and put in some more description, but i dont have it made at the moment...

This will be released at the same time as my M4 Carbine. Please visit that as well, if you haven't already.

lol

have a good time fellow iblesers... Can't wait to see you in the next one :)

Note the M4 has been updated since this picture was last taken

And last but not least, please comment, rate, comment again, then subscribe :)



Share

    Recommendations

    • Stick It! Contest

      Stick It! Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Oil Contest

      Oil Contest

    289 Discussions

    I built it and added a heartbeat sensor, bayonet, and a red dot sight.

    it is a smg, the mags a different shape, normally the stock is foldable, the barrel is shorter and it fires the 556 round instead of a 7.62mm

    kalash_ak74su[ekm]694x300[ekm].jpg

    A submachine gun fires pistol rounds. Since the 74u fires 556, it's an Assault Rifle. Debunkt'.

    I grew up visiting relatives in the country. That's how I got knowledgeable on firearms. You wouldn't believe the arsenal they had. They used to fish with pipe bombs and pick out the screws and nails. Nasty.

    Slap a v-grip on it, if you need to. I can control it just fine, they had a silicon(e?) tube around the gas tube so you can grab it up there. Makes it really easy to control. As for the M-16, I hate it. The M4 is better, IMO. The M-16 is really unreliable, the one I fired jammed once every mag, and it was only about 5 years old. Besides that, it was really hard to adjust the sights. Never shot straight. Terrible gun from Colt.