Introduction: Airwatcher - Air Stations
I made a project to measure temperature , humidity and air quality of 3 rooms. The clients send data to reciever via NRF24L01+PA+LNA Transrecievers and webserver draws graphs using google charts.
used parts :
Arduino Nano v3.0 buy
DTH22 Temperature & Humidity Sensors buy
MQ135 Air Quality Sensors buy
NRF24L01+PA+LNA Transrecievers. buy
5V to 3.3V voltage regulators buy
Arduino Nano Ethernet Module buy
micro usb connector buy
Orange PI Zero (for webserver) buy
Step 1: Client and Server Circuits
There are 2 different circuit diagram for Clients and Server.
After making working prototypes I drawed the circuit on www.easyeda.com and ordered PCBs.
These are in very high quality !
Step 2: Client and Server PCBs
The values are recieved by server and pushing them to PHP Webserver.
Web Server uses Sqlite lightweight database to store datas.
You can also generate the same PCB(s) with using gerber files in the attachment.
Step 3: Graphs
There are graph pages which are ;
- Last Temperature , Humidity , Air Pollution values
- Last 7 days - Historical data of Temperature
- Last 7 days - Historical data of Humidity
- Last 7 days - Historical data of Air Pollution
Step 4: PHP Webserver
Install a php web server on a pc / single board computer. Then replace the /var/www/ folder with the following SVN repository
Thanks a lot...
Have a nice day!