Anime-Kid Presents: PULSAR-RFD

351

29

Introduction: Anime-Kid Presents: PULSAR-RFD

About: Physics, the only thing that really matters. \m/ Djent & Shred \m/

Hi!
i made this gun, based off: [url=https://www.instructables.com/id/My-SEGV-2-Shell-Ejecting-Gun-Version-2/]Sharir1701's shell ejecting gun[/url],
this is my powerfullest gun upon present!

PULSAR-RFD stands for:
Powerfull Ultimate Law Sniper Asault Riffle - Random  Fire Distance,
the RFD is because it litterly sometimes fires at random distance, and it's not so acurated, BUT!
it has a gravity mag!, it holds 5 rounds, when ram is pulled back!

let's check the pro's and con's

pro's:

powerfull
has grip
has acog(normale sights...)
has de-atatchable stock(5 layer c: )
the gun it self is 3 layers
far pin pull back
good tigger
nice distance


con's:
low cap mag...
pin sometimes try's to enter the back of the gun...
tigger sometimes breaks or, is hard to pull
pin is hard to pull, and it was almost imposible to put the "bolt" handle on it
sometimes the bullets are stuck in the barrel(when not good inserted!)
not so acurated...
doesn't have a "mag", but a space to put bullets in, that is powerd by gravity,
stock needs to be hold back by a rubberband, or els it will break when on ground sniping

Share

    Recommendations

    • Water Contest

      Water Contest
    • Organic Cooking Challenge

      Organic Cooking Challenge
    • Creative Misuse Contest

      Creative Misuse Contest

    29 Discussions

    Hij is okay, maar ik ben het wel met The Racker eens.
    Voor de trekker kun je eventueel in een van de recente guides kijken (die van DarkowlKnex of Red), want er zijn inderdaad betere trekkers voor 3-laags geweren, zoals Blue Mullet zei.
    Enne, die stock moet eigenlijk wel steviger vast gemaakt worden. Als je die nu te hard op en neer zwaait, kan ie afbreken

    8 replies

    het ironische is, dat die stock inderdaad afbrak toen ik ermee wiebelde XD
    maar ik trek me denk eff terug uit het post gebied, en ga meer kijken, en er van leren c:
    ik heb nu red's broer(naam vergeten ._.), (en red zelf) hun slide action gemaakt, en een sksp

    I'm not trying to be mean, but I would say before you post any other guns, take some time to build other people's guns to see how slightly more advanced mechanisms work and what makes a good gun and what doesn't.

    my handle fed pistol is three layers and it works good enough for a gun that i cant get enough rubber bands for :)

    WILL NOT BE POSTED

    (i kinda broke it, when being pissed it didn't wanted to work after a small update)