1. Fusion 360
2. Picture of the mold that you want to make, or a sketch of your design
3. MDX40A Printer
5. Flame Fast ( Pewter Melter)
6. Sand Paper
8. Goggles (for safety)
9. Apron (for safety)
10. Gloves (for safety)
11. Barrel Polish
12. Resin if you would like to color it
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: 1st Step: Choosing Your Design
Choose the picture of the wanted design or draw one of even sketch one on Fusion 360, and it's free it can be downloaded.
Step 2: 2nd Step: Create
Start creating a cube 160 mm
Click on image and decal
Select a face
Step 3: 3rd Step: Uploading an Image
Upload image from your laptop
Step 4: 4th Step: Tracing
Reduce opacity to trace
Play with the size and make it the size you want
Modify it press and pull
Step 5: 5th Step: Finalizing
Adjust to the level of thickness you want and you're done.