Today we're gonna do... a arcade machine.
- Micro SD card (min. 8 GB)
- Two-sided tape
- Wallpaper cutter
- Bluetooth gamepad
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Frame
Set a 2 cm margin, hen draw a tablet outline and margin like on the photo. Measure the tablet screen frame and draw it, cut it.
Step 2: Back
Redraw the frame like on photo and cut it.
Step 3: Fill
Redraw frame and cut like on the photo. Do it about five or seven times. Glue it togheter.
Step 4: Ending Dock
Glue the back and front. Cut a piece Cut the piece into 5 cm as in the picture.of cardboard with station length and 10 cm. Glue it to back of dock. Cut a piece of cardboard with a length of station and 5 cm, bend 1 cm on both long sides. Glue double-sided tape on the bent elements. Glue as on the picture. Slide the tablet into the dock, it should look like a picture.
Step 5: Setuping
Download the games and emulators from the links below :
Unpack games and copy to SD card, instert the card to the tablet.
Connect the gamepad.
Step 6: Enjoy
Congratulations! You just made an arcade machine. If you want more games or other systems, you can find them on the internet. Enjoy!
Participated in the