Arduino Basic Led Blinker With Delay Controller

this tutorial will teach u how to make an arduino led blinker

Materials required r

Arduino board

Led

This tutorial will also teach how to edit the delay between the blinks

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Programming

in the arduino software go to

File>examples>basic>blink

http://www.arduino.cc/en/Main/software

Go to the link for the software

The code is in the image as u can see if I don't get to the examples of the software

The numbers in delay(1000) represent the delay of 1000 milliseconds

U can edit the numeric values of the bracket

And also u can edit the int value which represents the positive terminal pin

For convenience u may change it from 7to 13 so that the grnd pin is just next

Step 2: Connections

connect the longer lead or the positive pin of led to pin 7as in my code

Then connect the other shorter pin to grnd pin

Power the board and your first led blinking project is ready

Makerspace Contest

Participated in the
Makerspace Contest

Be the First to Share

    Recommendations

    • Instrument Contest

      Instrument Contest
    • Make it Glow Contest

      Make it Glow Contest
    • STEM Contest

      STEM Contest

    Discussions

    0
    None
    ankesh2002

    3 years ago

    Yes i shall soon