Introduction: Arduino Flashing LED Project for Kids
Flashing LED Project with Arduino UNO. Basic Project for kids FUN
What You Need!!
- Arduino UNO
- 3 LED's
- Jumper wires
- 1k Ohm Resistors
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Connecting Wires
Connect all wires as per picture
- connect ground with breadboard (-) Rail (Brown wire in picture)
- connect all three resistors with led on the cathod side of LED connect to negative (ground) on Breadboard.
- connect pin 13,12,11 to Arduino Board to each LED Respectively
Sketch for Flashing LED Program click on this link to download Sketch