Introduction: Arduino Nano Is Not Recognized
When it come to electronics, most of us buy an arduino clone uno or nano
the uno's code gets uploaded quickly But the Nano's port isn't showing up so does it mean that your board is dead?
No, But there is a small chance.
if your arduino nano has the problem stated above then read this full instructables till the end and if any doubt or problem still remaining we'll solve it
Step 1: The Problem With the Clones
Most of the clones have CH340G Driver, which should have its driver installed in the pc
http://www.wch.cn/download/CH341SER_EXE.html
download this driver then your clones will work
if it still doesn't work then try the old bootloader atmega324