Arduino Nano RC Flight

About: about.me/chandima.b.samarasinghe

RC Plane Body : Styrofoam

Remote Controller Body : Styrofoam

Components List:

Tools

  • Glue gun and glue sticks
  • Soldering iron

RC Plane

  • 1 x Arduino Nano
  • 1 x NRF24L01+ radio transceiver (manufacturers specify 1km range)
  • 1 x 30A Electronic Speed Controller (esc)
  • 1 x 1000kv brush less outer-runner motor
  • 1 x 7045 Propeller
  • 2 x micro servos
  • 1 x LiPo battery (I used 3 cell, 850mAh)
  • Wires and Jumper wires

Remote Controller

  • 1 x Arduino Nano
  • 1 x NRF24L01+ radio transceiver
  • 2 x Joystick modules
  • 1 x Battery Pack (I used 3 cell LiPo)
  • Wires and Jumper wires

Plans and Diagrams will be uploaded soon :)

Arduino Codes:

https://github.com/chandima-b-samarasinghe/arduino-remote-controlled-flight

Share

    Recommendations

    • Paint Challenge

      Paint Challenge
    • Planter Challenge

      Planter Challenge
    • Sensors Contest

      Sensors Contest

    7 Discussions

    0
    None
    m4niek

    2 years ago

    pls plan :-)

    0
    None
    jakkesb

    2 years ago

    Don't be sorry - take your time, I was only wondering....

    0
    None
    jakkesb

    2 years ago

    'Plans and Diagrams will be uploaded soon' - how soon, Chandima?

    1 reply
    0
    None
    Chandima_Bjakkesb

    Reply 2 years ago

    I am really sorry for the delay @jakkesb