Arduino - Security Access Using RFID Reader (MFRC522)

About: Arduino, Raspberry Pi, esp8266, Tutorials, Projects

In this tutorial we will learn how to use the RFID MFRC522. So we can use an RFID system to open a door. For example, only the person with the right information on his card is allowed to enter.

Step 1: Required Hardware

Arduino Board - https://goo.gl/Rqc5w2

RFID RC522 Module - https://goo.gl/Sx1jIi

Servo Motor - https://goo.gl/iywd5p

Magnetic Lock (If to use) - https://goo.gl/iywd5p

LED Kit - https://goo.gl/iywd5p

Buzzer - https://goo.gl/iywd5p

F to F Jumper - https://goo.gl/iywd5p

M to M Jumper - https://goo.gl/iywd5p

Breadboard - https://goo.gl/iywd5p

Some Promotion Links

Flash Deals -- https://goo.gl/CVqg7P

Mega Stock Clearance -- https://goo.gl/eCbuiP

Arduino Kits -- https://goo.gl/uwr19e

More Budget 3D Printers -- https://goo.gl/uwr19e

Anet A8 3D Printer Promotion -- https://goo.gl/uwr19e

Step 2: Connections

You can wacth tutorial video for more details.

Step 3: Source Code

You must download and install the MFRC522 Library.

Get the Library - https://goo.gl/CXKrqt

Get the Code - https://goo.gl/wBbnB1

Step 4: You Can Subscribe to My YouTube Channel

You can subscribe to the my YouTube channel for more tutorials and projects. Subscribe for support. Thank you.

Go to my YouTube Channel - https://goo.gl/f0RHmR

Share

    Recommendations

    • Make it Glow Contest 2018

      Make it Glow Contest 2018
    • Plastics Contest

      Plastics Contest
    • Optics Contest

      Optics Contest

    Discussions

    0
    None
    MetodG

    11 months ago

    I have problems with libary

    ( #include <deprecated.h>

    #include <MFRC522.h>

    #include <MFRC522Debug.h>

    #include <MFRC522Extended.h>

    #include <MFRC522Hack.h>

    #include <require_cpp11.h>)