Introduction: Arduino Uno (3 Servo Guide)
This is the tutorial of mount a 3 servomotor circuit with an arduino uno R3.
Maybe the text is wrong, sorry im from Spain and i dont Wright very well in english :)
Step 1: Mount the Components
Plug in the componets just like in the photo and make sure that they are in the correct position.
Step 2: The Code
Open the arduino program, copy the code and paste in the program.
After that, plug in the arduino with the USB adaptor, verify and upload.
((the code is in the text file))
Step 3: Components List
1 arduino uno R3 or other version of arduino uno
- arduino program
1 USB adaptor (computer--->arduino)
- lots of wires