Introduction: Arduino Uno Into Usb Keyboard
convert arduino uno work as a arduino leanardo,mico.which work as a HID devices
Convert arduino uno into usb mouse or keyboard emulator into four easy steps
Just we have to replace the arduino frimware
Step 1: Download and Install Software
Download and install
1.unojoy usb keyboard frimware link:-click here
2.install atmel filp software link:-click here
Step 2: DFU Mode
- After installing flip software
- Plugin arduino uno into your computer
- Upload simplejoystick.ino file
- reset the 8u2 or 16u2
- To do this, briefly bridge the reset pin with the ground. The pins are located near the USB connector, as shown in this picture. Connect them briefly with a piece of wire.
Step 3: Now Follow Instructions
- after dfu mode
- Unzip unojoy.zip file
- Open folder unojoywin
- Run Turnintoajoystick windows batch file
- Upload simplejoystick.ino file
Step 4: Install Joytokey to Emulated Keyboard
install joytokey to emulate or control the keyboard and mouse
It is easy to control games,media and use for interactive project
Participated in the
Arduino Contest 2017