Arduino Uno and RFID Access Control With Relay Module

14,520

22

3

Introduction: Arduino Uno and RFID Access Control With Relay Module

Arduino Uno and RFID Access Control With Relay Module

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Arduino Code

Step 2: Make Your Circuit As Image

you need

1 - Arduino Uno

2 - RFID-rc522

3 - 100 ohm resistor 1/4 watt

4 - 3 led red green blue

5 - relay module one channel

and some wire

Be the First to Share

    Recommendations

    • Arduino Contest 2020

      Arduino Contest 2020
    • First Time Author Contest

      First Time Author Contest
    • Space Challenge

      Space Challenge

    3 Discussions

    0
    grzegorz.sternik
    grzegorz.sternik

    Question 7 weeks ago on Step 2

    I applied this project in gate access control.
    It works but arduino often suspends, I do not know why.
    After restart it is good for some time. Where is problem?
    I checked with two different boards RFID-rc522 and arduino - its the same effect.

    0
    grzegorz.sternik
    grzegorz.sternik

    2 months ago

    I applied this project in gateway access control. Arduino often blocks, I do not know why.
    After restart it works for some time. Where is problem?