Arduino and Nodemcu , ESP8266 Commanding Android


Introduction: Arduino and Nodemcu , ESP8266 Commanding Android

About: android and arduino project developer

two in one app with voice command Arduino And Nodemcu , ESP8266 commanding android app In Bluetooth mode you can send command via Bluetooth using hc05 or hc06 with arduino any board In Wifi Mode you can send any customized command to NodeMcu or any esp8266 application this is a simple guide for simple project choose one method which mode is WiFi or Bluetooth to command your application install DCmote app in your mobile phone go to setup tap on add switch 1- set your switch name. you need to speak switch name when you using voice commanding button 2- type your command. 3- choose any icon and click green plus button to save 4- Back setup 5- choose your commanding method and save as default in Bluetooth mode show all bluetooth device you paired. you need to select hc05,hc06 and set Bluetooth Mode as Default. in WiFi mode type ip address your application provided default is port 80 save ip and port and set WiFi mode is default back to setup and restart app Now you can use this app Go to Home and click commanding button to send command i think you can understand how code this 2 example code are provided



    • Water Contest

      Water Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Clocks Contest

      Clocks Contest


    Hello there!

    We're glad you want to share something with the Instructables community!

    And we’re here to help you out.

    In order to be published live on the site, Instructables must consist of the following things:

    - Multiple steps showing how you made your project

    - Written instructions in each step

    - Your own original images

    Beyond making your Instructable simply publishable, this guide ( explains what is required to have your Instructables featured by our site editors. It’s very helpful, and definitely worth checking out.

    We would love to review your project again after you have made the necessary edits, and we will publish your project if it is eligible.

    If you have any questions, please feel free to ask right here or send us an email at

    Nicole (Penolopy Bulnick)
    Instructables Community Manager