Armour Airsoft

1,863

11

Introduction: Armour Airsoft

This is Armour Airsoft Targets

Step 1: Devistation

The older 6mm MDF targets lasted about a month.
In an effort to make them last longer, I used soda cans to clad them.

Step 2: The Process

Carefully punch a hole in a soda can.
Cut the can in to a sheet to work with.
Use a scribe to mark out the tin.
Cut it out and staple it on to the MDF.

Step 3: Hang Them

You can bend the tin at the back of the target to form a hook.
This can then be hung on to various surfaces.

Share

    Recommendations

    • Creative Misuse Contest

      Creative Misuse Contest
    • Fix It! Contest

      Fix It! Contest
    • Water Contest

      Water Contest

    Discussions