Introduction: Art and Craft Activity: 3D Sheep
This activity is recommended to anyone who loves art and making beautiful objects. You can create a pretty cool 3D Sheep and place it on a platform or table for fond reminders. All you need to do is tear paper, stick, fold and apply a bit of glue. Good Luck!
The materials needed to make it is very simple:
4 small pieces of straw
4 tooth picks
2 googly eyes
2 black ovals as ears
1 black face cut-out
Above, you will find a video tutorial showing the making of a 3D Sheep on a step-by-step basis. The video will make everything clear and simple.
Step 1: Complete the Face of the Sheep.
Paste the googly eyes on the big back face cut-out and then stick the
2 black ovals on either side. The ovals function as ears.
Step 2: Pick the Newspaper and Then Proceed to Tear It Into Small Pieces.
Soak these small pieces of paper in water for at least 1 hour.
Step 3: After an Hour...
Pick up the soaked pieces of paper and ball them up into an oval
Step 4: Stick 4 Toothpicks on All 4 Corners of One Side of the Oval Shaped Paper.
Apply glue all over the oval shaped body and then stick cotton wool
all over it.
Step 5: Once It Is Dry...
Apply glue on one shorter side of the body and stick the face
cut-out with googly eyes. Cover the toothpicks with paper.