Awesome Laptop Stand




Introduction: Awesome Laptop Stand

While i am having a bath I love to watch movies or series. However it (is) was a disaster because i always had to get some books or something below my laptop to see the whole screen. Therefore i made this Laptop stand. I made the cuttings with my cnc. But you are also able to built it with a scroll saw or jig saw or something like that...

Step 1: Materials You Need

You need

- 1m threated rod 10mm diameter

- 1m aluminium pipe ( inside diameter is 8mm)

- a few nuts and washers , depending on the size of rod you use

-18 mm thick plywood or what you have lying around

Step 2: Cut Out the Pieces and Painting

First you need to do is to cut out the two pieces. If you have no cnc you can also do it with a device you have.

After that you have to paint it with a colour you like

Step 3: Assembling

When the clue is dry you can assemble it.

Iappreciate every comment about the stand. If you have any questions feel free to ask.

Woodworking Contest 2017

Participated in the
Woodworking Contest 2017

Be the First to Share


    • Mason Jar Speed Challenge

      Mason Jar Speed Challenge
    • Pumpkin Challenge

      Pumpkin Challenge
    • Bikes Challenge

      Bikes Challenge