Introduction: BLINKING FACE
Makers: Rohith Gowda, Deepak, Kushal Kumar
Location: E4D Banjarapalya Makerspace
We made this "Blinking Face" for the Instructables Build Night on Chibitronics - Circuit Stickers. The idea was to use the materials to create a fun design that looks cool.
Circuit Stickers LEDs
Blink effect sticker
Step 1: Blinking Face
First we draw face as shown in picture.
Step 2: Putting Coppertape
Put copper tape has shown in picture.
Step 3: Putting LEDs
Put LED as shown in picture.
Step 4: Sticking All LEDs and Blink Effect
Place all the LED stickers and then stick the Blink Effect Sticker as shown in picture.
Step 5: Putting Coin Cell
Place the coin cell has shown in picture. Make sure the negative end of the cell is on the tape going to the LEDs' negative ends. The positive tape can be extended towards the corner of the paper and then folded back.
Use this video to understand how to do this more clearly - https://www.youtube.com/watch?v=MpAvCYFR_zM
Step 6: Blinking Face
After finishing this project it looks like this and also blinks.