BREAK ACTION SAWN OFF SHOT GUN

2,553

4

32

Intro: BREAK ACTION SAWN OFF SHOT GUN

COOL HOPE YOU LIKE

PIC 1 WHOLE GUN
PIC 2 BREAK ACTION
PIC 3 PIVOT POINT

Share

    Recommendations

    • Halloween Contest 2018

      Halloween Contest 2018
    • Furniture Contest 2018

      Furniture Contest 2018
    • Metalworking Contest

      Metalworking Contest

    32 Discussions

    0
    None

    Well, when I tried back in '09 (A whole four years ago....), I managed to get something reliable and fast to fire, but I couldn't design one that worked well enough to use due to the elastics pulling the pin back either being too strong or too weak. PM me if you succeed!

    so you expect a 40-50 give or take degree turn on the hinge to pull back a 30cm ramrod??? lol jokes but serioiusly there are limitations on what knex can do unless your called mepain but no i dont think so hope it helps!:)

    I made a true break action gun. The elastics from the pin were attached to the front of the gun. When it folded, it pulled the pin back. When it was straight, it held the barrel together. It shot 20 feet.... :(

    0
    None
    NYPABartboy

    Reply 8 years ago on Introduction

    Even on a real gun, no. Well, at least the one my dad has. With his you break it and load the shell, close it and pull the hammer.

    0
    None
    BartboyNYPA

    Reply 8 years ago on Introduction

    Hmmm... On the ones I've seen, you just break it, put the ammo in, then un-break it. It's then ready to fire.

    0
    None
    Mr. CowboyBartboy

    Reply 9 years ago on Introduction

    Dont mean to butt my way in but on a real break action(for instance lets use the 410 gauge shotgun) on the 410 that my dad had for me the firing pin never moved when the chamber was open. If you could build a real firing mechanism pm me pics but so far as i know the model would be big if ya could.