Barrel With Adjustable Handle for KillerK Knex Gun.

4,024

2

16

Published

Introduction: Barrel With Adjustable Handle for KillerK Knex Gun.

A barrel that just uses Knex rods with better accuracy for the KillerK Knex gun.

Step 1: Gather Your Supplies.


Step 2: Begin to Build.

Take two gray long pieces and start adding red triangle pieces.

Step 3: Building the Handle.

Take two green or red medium pieces and begin adding yellow attachments in opposite directions (refer to pictures).

Step 4: Attaching the Handle to the Barrel.

Attach handle to the red barrel by sliding the handle into the barrel to where you want it.

Step 5: Attaching the Barrel to the Gun.

Use two orange connectors to attach the barrel to the KillerK gun.

Share

    Recommendations

    • Backpack Challenge

      Backpack Challenge
    • Clocks Contest

      Clocks Contest
    • BBQ Showdown Challenge

      BBQ Showdown Challenge

    16 Discussions

    KILLERK'S pistol is not so good anymore. It needs a sharpened rod, and that tan clip on the firing pin creates SO MUCH FRICTION. So I would suggest to just take another gun.

    The extension sometimes falls off and messes it up.

    does the barrel of reds connect with the barrel of greys

    0
    user
    steel$

    11 years ago

    this is a good desint but tosent the thing u added shorten the rang greatly

    This will decrease the range and accuracy because of the extra length of barrel and joint between it and the gun. It's a good idea though. Nice instructable- good pictures and views, good background.