Hey everyone it's momo and today I'll show you how to make a cute nerdy book necklace. Let's start

Step 1: Supplies

1- small piece of card stock
2-stapler
3- piece of printer paper
4- ruler
5- clear tape
6- scissors
7- glue
8- patterned paper

Step 2: Fold The

Fold the piece of printer paper in forths. Then take half of the paper and fold it in 16 separate rectangles.

Step 3: Cut and Fold

Cut them all out (you can throw away 4) YOU ONLY NEED 12 RECTANGLES. Then group them by three (so you should have 4 separate groups)

Step 4: Staple

Put them on top of each other and staple the 4 groups.

Step 5: Tape

Tape two of the sections together with your clear tape. Then tape both of the sections together

Step 6: Card Stock

Take your card stock and put it around your book pages. Make sure there's a little bit of excess paper on every edge/side

Step 7: Pattern Paper

Cut out the pattern paper on the card stock (you also want to leave a little bit of excess on the edges.) then cut off the corners of the pattern paper

Step 8: Glue

Then when the pattern paper has the same folds in it as the card stock, glue the card stock to the pattern paper. Fold over the excess and tape it down

Step 9: Put the Pages in

Then you'll take the pages and put them inside the cover to make sure everything fits. Then put tape on it and press it down hard.

Step 10: Poke a Hole

For this step just simply poke a hole in the top of the spine so you can put a necklace chain through

Step 11: Finished

And that's all to it! I hope you all enjoy this tutorial and get lots of comments and remarks on your cute necklace! Let me know above how your's turned out