Borderlands Style Nerf Gun

Introduction: Borderlands Style Nerf Gun

I will be showing you how to paint any nerf gun (here the 'Raider CS-35') in the style of borderlands weapons

You will need:

A nerf gun

White spray paint

Yellow spray paint

Black paint

Grey paint

White paint/paint marker

Orange paint

Sharpies (orange/yellow shades, black, brown)

Pencil

Paintbrush

Masking tape

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: 1) Painting Your Gun

Using masking tape, cover any holes or slots in/on the gun e.g. the sliding side door.

Using white spray paint, spray the entire gun. Leave to dry. Add one or two more coats

Going across both sides of the gun, create a gap of about an inch using masking tape to create it (strip going diagonally across both sides) Then, using yellow gloss or matte, spray the gun again with a few coats.

Paint the sliding door, pump handle/whole rail, stock placement black. Paint the handle dark grey and white/light grey (as shown in the picture). Finally, paint the end of the barrel and trigger, orange

Step 2: 2) Details

Using your sharpies add details onto the gun using your own designs based on the borderlands games.

you can do exact replicas of guns from the game e.g. a bandit gun or a tourgue gun. here i just made a generic borderlands design.

once you are finished painting and drawing on everything, you are pretty much done.

Step 3: 3) TAH-DAH

YOU ARE NOW DONE!

Once you feel comfortable you can do the same to any gun.

have a good time moding

First Time Author Contest

Participated in the
First Time Author Contest

Be the First to Share

    Recommendations

    • Sculpting Challenge

      Sculpting Challenge
    • Trash to Treasure Contest

      Trash to Treasure Contest
    • 3D Printed Contest

      3D Printed Contest

    2 Discussions

    0
    The_Spaniard
    The_Spaniard

    2 years ago

    Did you sell this gun?

    If so, How much did you sell it for and where did you sell it?