Introduction: Brush Robot
location: Banjarapalya E4D Maker space
2,double side tape
Step 1: Cut the Brush
First take one brush and cut it as shown in the image with the help of Saw.
Step 2: Stick the Motor
Take the pager motor and stick it to the brush as shown in the image with the help of Double sided tape.
Step 3: Stick the Coin Cell
Take one coin cell and stick it to the brush with the help of double sided tape.(Make sour negative of motor wire should be stick to the negative side of coin cell.)
Step 4: Connect the Wire
Take a positive wire of motor and fix it to the coin cell positive side.
Step 5: Robot
Finally brash robot project completed, this is the image.