C02 Bomb

How to make a C02 Bomb in under 5 minutes. (CAUTION) This is extremely dangerous. The bomb can suddenly explode w/o warning causing shrapnel to go flying.....Be Careful!!!!

Step 1: Materials

You will need

A 16 oz. Water Bottle (plastic) not glass, the shrapnel from it can kill you
C02 Container
Small Nail
Hammer
Duct Tape or Electrical Tape

Step 2: Assembly

First unscrew the cap to the bottle. Next lay the small nail on its head making sure it stays standing up. Next put the end of the C02 container on the top of the nail and tap very gently. Be careful, if you tap to hard the C02 will come out to fast and you will not have enough time to contain it. Once a small hole is punctured in the container. Quickly put it in the bottle and sealed it immediately. Grab the duct tape or electrical tape and wrap it around the cap a few times. While your in the process of doing this the bottle will begin to expand greatly. Let the bottle set for a few minutes making sure all the C02 has left the bottle. Once you think the bottle is completely full its time to test it out.

Step 3: Testing It Out

(CAUTION) Be extremely careful. Wear safety glasses and be smart about how you use this. Don't say I didn't warn you. Now on to testing it out. I recommend doing this OUTSIDE. Notice how I put that in capitals. Next position yourself away from a hard surface like a tree or a driveway. Throw the bomb and BOOOOOOOM!!!!! Well done. You've completed your first C02 bomb. Now to do it again.