Calibration Guide for Smoothboard

Introduction: Calibration Guide for Smoothboard

About: Smoothboard Tech is a registered business in Singapore that provides technical and sales support for all Smoothboard users. With continuous development and active research for the past few years our mission...

In using the Smoothboard software, calibration has to be done in order to optimize its performance. With just a few simple steps, your Smoothboard is ready to be used:

For any futher enquiries, please contact us at admin@smoothboard.net or join us at https://www.facebook.com/smoothboard

Below is a short video on 

Step 1: Position the Wiimote

Step 1: Position your Wiimote at double the screen height of your projected screen

Step 2: Face Wiimote Towards the Screen and Press a Button

 Step 2: Face the Wiimote towards the center of the screen and  Press the A Button on the Wiimote

Step 3: Start Calibration

Step 3: Start Calibration by clicking on the four points as shown in diagram 
Step 4: Your Smoothboard is ready to be used once this is calibrated!

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020
    • Maps Challenge

      Maps Challenge

    Discussions