Can "O" Stuff




Introduction: Can "O" Stuff

This is a fast and simple craft for turning a soda can into a pen and pencil holder, cheap and nerdy flower vase or whatever you can think of putting inside a soda can.

Step 1: What You Need

All you need is one soda can of your choosing, box cutter/razor blade or anything like that your comfortable with, and some pliers.

Step 2: Getting Started

After you have consumed your beverage take your cutting tool and begin to cut out the top of the can, (away from yourself!) Keep on cutting until the top of the can is removed, as in see in picture # 2.

Step 3: Safety First

Now heres where the pliers come in handy. use the pliers to pinch the sharp edge inward, away from the opening. Be careful not to squeeze too hard and ruin the can.

Step 4: Finshed

Now you can put pens, pencils, flowers, soda tabs, anything in it and its a cheap decoration. Be sure to clean out can before you put things in it.

Be the First to Share


    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    5 Discussions


    10 years ago on Introduction

    My best friend's mom did this a long time ago and I remember she put some black electrical tape around it so that it wouldn't cut and it still looked very professional.


    10 years ago on Step 2

    Try using a can opener. I'm not sure that it always works, but I have done it before. Scrapes up the outside a little bit, though.


    Reply 10 years ago on Introduction

    Indeed, I was about to say that too, It works, And it seems a bit safer than using a razor.