Cardboard Bow Target

Introduction: Cardboard Bow Target

How to build a cardboard bow target for lower poundage bows.

Step 1: Get Materials

You need lots of cardboard, 1 piece of paper, pen, Duct tape, and a sharp knife or scissors.

Step 2:

Open a large cardboard box. It should be the desired size of your target.

Step 3:

Start cutting strips of cardboard to put inside the box.

Step 4:

Start laying down strips of cardboard in the box. Make sure all of the cardboard is laid evenly.

Step 5:

After it is filled with cardboard close the back. If you don't know how refer to the pictures.

Step 6:

Now to make it stand up use one last small box on the back. Also tape the box closed.

Step 7:

Finally, draw a target on a piece of paper and tape it to the target.

Maker Olympics Contest 2016

Participated in the
Maker Olympics Contest 2016

Cardboard Contest 2016

Participated in the
Cardboard Contest 2016

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Super-Size Speed Challenge

      Super-Size Speed Challenge

    Discussions

    0
    MakerIan
    MakerIan

    3 years ago

    I suggest redrawing the target face with either a printer or a compass. Views and likes do seem partially driven by that first picture.